• 센서학회지
• /
• 제18권4호
• /
• pp.280-285
• /
• 2009

In this paper, we designed a 2-stage CMOS operational amplifier with temperature compensation function using 2-poly 4-metal 0.35 $\mu$m standard CMOS technology. Using two bias circuits, the positive temperature coefficient(PTC) and the negative temperature coefficient(NTC) of the bias circuit are canceled out each other. When reference current circuit is simulated that it has a temperature coefficient of -150 ppm/$^{\circ}C$ with a temperature change from 0 $^{\circ}C$ to 120 $^{\circ}C$. Also the proposed circuit has a temperature coefficient of -0.011 dB/$^{\circ}C$ of DC open loop gain with the same temperature range.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.91-92
• /
• 2007

An anomalous positive temperature coefficient of electrical resistivity (PTCR) was investigated in a ferroelectric lead-free perovskite-type compound $(Bi_{0.5}Na_{0.5})TiO_3$ within $BaTiO_3$-based solid solution ceramics. The effect of $Nb_2O_5$ content on the electrical properties and the microstructure of (1 - x) $BaTiO_3-x\;(Bi_{0.5}Na_{0.5})TiO_3$ (BNT) ceramics made using a conventional mixed oxide process also has been studied. The Curie temperature was obviously increased with the increasing of $(Bi_{0.5}Na_{0.5})TIO_3$ content. The Nb - doped BNT ceramics (x=0.01) display low resistivity values of $10^{1{\circ}}C-10^{2{\circ}}C$ ohm.cm at room temperature and the Curie Temperature of $T_c=160^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.17-20
• /
• 1994

PTCRl(positive temperature coefficient of resistivity) thermistors in the thin file BaTiO$_3$ system were deposited by radio frequency (13.56 MHz) and dc radio frequency (13.56MHz) and dc magnerton sputter equipment. R-T(resistivity -temperature) properties was investigated as a function of substrate and the temperature variation. The specimens make a comperison between the thin films and the bulk in the resistivity variation. Substrate temperature. deposition time. and forward power are deposited at the 400$^{\circ}C$, 10 hours, and 210 watt. respectively. The aim of this work is to obtain lower than bulk specimen resistivity in thin films BaTiO$_3$ system thermistor by RF/DC magnetron sputter equipment.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.58-63
• /
• 2019

Lithium-ion batteries used for IT, automobiles, and industrial energy-storage devices have battery management systems (BMS) to protect the battery from abnormal voltage, current, and temperature environments, as well as safety devices like, current interruption device (CID), fuse, and vent to obtain positive temperature coefficient (PTC). Nonetheless, there are harmful to human health and property and damage the brand image of the manufacturer because of smoke, fire, and explosion of lithium battery packs. In this paper, we propose a systematic protection algorithm combining battery temperature, over-current, and interconnection between protection elements to prevent copper deposition, internal short circuit, and separator shrinkage due to frequent and instantaneous over-current discharges. The parameters of the proposed algorithm are suggested to utilize the experimental data in consideration of battery pack operating conditions and malicious conditions.

• 반도체디스플레이기술학회지
• /
• 제11권3호
• /
• pp.63-67
• /
• 2012

The films were deposited at evaporator system and were annealed at heat treatment. The films had a dense microstructure with fine grains. The electrical properties of the films were dramatically controlled with annealing. Samples Preparation were analyzed in term of positive temperature coefficient of Resistivity Samples were made in the substrate tempera-true of $400^{\circ}C$ deposition time of 10 hours, and forward power of 210watt. R-T(resistivity-temperature) Characteristics of the samples were investigated as a function of the substrate type and the ambient temperature. The resistivity of the thin film specimens was compared with that of the bulk type specimens. By using RF/DC magnetron sputtering system, we obtained lower resistivity in the thermistor with thin $BaTiO_3$ film than that in the bulk type thermistor.

• 동력기계공학회지
• /
• 제19권4호
• /
• pp.43-49
• /
• 2015

This study has been analyzed and investigated the possibility for the substitution of a heat source with the application of PTC(Positive Temperature Coefficient Heater) in a food drying machine. And this experiment was conducted to measure temperatures at the upper part of the vessel and the heat sink. And the structure has the many holes plane connected with the external air in the upper part of similar volumetric vessel, and attached to the PTC heater (3sets) of total consumption electricity of 120[W] in Al radiant heat structure and the small fan (2sets) in the suitable space of the lower part. Consequently, it was found that at the most conditions of food drying test with the seven holes(5mm) under the control temperature $62^{\circ}C$, the optimum drying condition formatted and the optimum time range especially appeared from 6,500 second to 7,000 second in case of drying test on banana sample.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1339-1340
• /
• 2006

일반적으로 저압계통의 고장전류를 차단하기 위해서, 기중차단기(LVPCB, ACB), 배선용차단기 등을 사용하고 있는데, 저압차단기는 저압계통의 고장전류를 차단할 수 있으나, 고장전류를 효과적으로 제한하지 못하며, 차단기 내부의 아킹시간이 상대적으로 길므로, 저압차단기는 물론 주변 전력기기에 전기적/열적/기계적 스트레스를 주게 된다. 또한 지속적인 부하의 증가로 인해 저압계통의 단락전류는 점점 증가하는 추세에 있으므로 저압계통은 물론 고압계통에서도 고장전류를 보다 빠르고 효과적으로 제한 및 차단을 할 수 있는 한류형 차단기가 제안되고 있다. 본 연구에서는 정온도계수(PTC, Positive Temperature Coefficient) 특성을 가지는 소자를 이용하여 저압계통에 적용가능한 한류소자를 개발하였으며, 기존 차단기에 직렬 혹은 병렬로 연결하여 저압계통의 고장전류를 매우 빠르고 효과적으로 제한 및 차단할 수 있으며, 아울러 저압계통의 차단보호 협조를 효과적으로 구현할 수 있는 한류형 차단기를 제안하였다. 한류소자를 전력기기에 적용하는 방법은 크게 기존 차단기와 직렬로 연결되는 방식과 기존 차단기를 수정하여 차단기 내부의 접점과 비직렬 연결되는 방식으로 구분 할 수 있는데, 본 논문에서는 직렬방식/비직렬방식으로 기존 차단기에 한류소자를 적용항에 있어서 대응가능한 대전류 PTC소자를 개발하였으며, 또한 각 방안에 대한 시제품을 제작하여 제한 성능을 검증하였다.

• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.217-221
• /
• 2008

In this study, We have been investigated the effect of calcination temperature and high-energy ball-milling of powder influences the $BaTiO_3$-based PTCR(Positive Temperature coefficient Resistance) characteristics and microstructure. The mixed powder was obtained from $BaCO_3$, $TiO_2$, $CeO_2$ ball-milled in attrition mill. The mixed powder was calcine from 1000 $^{\circ}C$ to 1200 $^{\circ}C$ in air and then it was sintered in reduction- re-oxidation atmosphere. As a result, The room-temperature electrical resistivity decreased and increased with increasing calcination temperature. specially, Attrition milled powder could have low room-temperature resistivity and high PTC jump order at 1100 $^{\circ}C$. attrition milling had lower room-temperature resistivity than ball milling. Particle size decreased by Attrition milling of powder influences in calcination temperature and room-temperature resistivity.

• 한국화재소방학회논문지
• /
• 제19권2호
• /
• pp.75-80
• /
• 2005

적충형 PTC 서미스터의 특성연구를 위해 $(0.90Ba+0.05Sr+0.05Ca)TiO_3+0.01TiO_3+0.01SiO_2+0.0008MnO_2+0.0018Nb_2O_5$와 같은 실험조성식을 설정한 후 표면실장(SMD) 적층형 PTC 시편을 제작하였다. 그 결과 상온 비저항 값을 크게 낮출 수 있고 용도에 따라 전류용량을 크게 할 수 있었으나 적층화로 인해 peak 비저항이 크게 낮아지고 열용량이 커짐으로써 스위칭(switching)시간이 늦어지는 점을 확인하였다. 전압-전류 특성에서는 적층수가 증가할수록 초기 최대전류값이 증가하며 큐리점에 대응하여 저항값이 급격히 커지는 전이전압(전계)도 증가함을 보였다. 그러나 인가전압(전계)을 증가시킬 경우 peak 비저항값을 높일 수 있어 스위칭시간을 줄일 수 있다 이 소자는 화재감지기의 센서로 활용될 수 있다.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.7-12
• /
• 1989

The effects of composition ratios and sintering conditions in Co1-xMgxO ceramics on the sintering characteristics, electrical properties and oxygen sensing characteristics were investigated. In the same sintering conditions, porosity decreased with increase of MgO contents. The relationshiop of temperature and resistance in Co1-xMgxO ceramics showed NTC(negative temperature coefficient) characteristics at the temperature range from $700^{\circ}C$ to 1,10$0^{\circ}C$. In the case of pure CoO, however, the PTC(positive temperature coefficient) characteristics were shown over about 90$0^{\circ}C$. The electrical conductivity of Co1-xMgxO ceramics decreased proportionally with decrease of oxygen partial pressure at the range from 1 to 10-4(atm). Particularly, Co0.5Mg0.5O ceramics showed the highest sensitivity to oxygen gas.