• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1092-1099
• /
• 2011

This paper is concerned with the ATO speed profile generation method in the moving block system. The ATO speed profile is calculated using the acceleration limit and the jerk limit to improve ride comfort. In addition, the speed limit and stop distance provided from ATP profile should be considered to ensure safety. In the moving block system, the speed limit and the stop position are frequently changed in real-time. Therefore, the ATO speed profile should be regenerated immediately according to change of the speed limit and the stop position, within the acceleration limit and the jerk limit. In this paper, the ATO speed profile generation method is proposed, which considers not only frequent changes of the speed limit and the stop position but also acceleration limit and jerk limit. Futhermore the simulation result is presented to verify usefulness of this method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.3
• /
• pp.221-233
• /
• 2007

In this paper, a simple but effective position profile generation algorithm for single axis high dynamic linear machine drive system is presented. In the recent industrial application fields like as LCD/PDP and semiconductor factory, requirements for the high performance positioning system with optimal position profile generator are highly increased to reduce the overall processing time. There might be various solutions for position profile generating algorithm according to the application type. A square-wave Impact quantity(Jerk) based algorithm with minimal locomotion time is argued in this paper to minimize the total time of one movement under some specific constrains such as maximum speed limit and maximum acceleration limit. In order to reduce the calculation efforts and satisfy the minimal locomotion time condition, the time variants representing each profile sector and a simple condition comparison algorithm are adopted. Also, the actual implementation method for profile generation algorithm and it's real performance results are presented through commercial linear machine drive system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.1
• /
• pp.89-94
• /
• 2013

Electro Otical Tracking System(EOTS) is required for a rapid movement as well as the stabilization of Line-Of-Sight(LOS). In order to achieve these two goals, this paper presents a position and velocity driving profile generation method from the constant acceleration and deceleration profile according to the current state, enabling a fast and smooth trajectory even if the target position changes during the movement of LOS. Simulation and experimental results reveal that the settling time could be reduced significantly by adopting the present position control scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.94.2-94
• /
• 2002

$\textbullet$ The method to have real-time response at the motion control. $\textbullet$ The trajectory generation method guarantees the continuous acceleration in changing the velocity during the actuator is moving. $\textbullet$ We propose the velocity profile generation algorithm in order to change object position or object velocity with continuous acceleration using blending method.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1061-1067
• /
• 2010

In this paper, we propose a simulator for testing of the Navigation Control System(NCS) in Bimodal-tram. NCS uses values of all sorts of sensors installed in vehicle to decide current position, and to control speed and steering of vehicle to go to a next position. Major functions of simulator are input processing of the driver and generation of virtual sensor data and driving profile(navigation path, magnetic information), and the NCS function. Virtual sensor data is generated according to output data from the NCS, driving profile and input processing of the driver, and monitoring systems is operated separatedly to confirm of NCS operation. This paper discusses about the implementation of the simulator, and analyzes and evaluates the simulation results.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.20-25
• /
• 2007

This paper describes a second-generation dual sine-grid surface encoder for 2-D position measurements. The surface encoder consisted of a 2-D grid with a 2-D sinusoidal pattern on its surface, and a 2-D angle sensor that detected the 2-D profile of the surface grid The 2-D angle sensor design of previously developed first-generation surface encoders was based on geometric optics. To improve the resolution of the surface encoder, we fabricated a 2-D sine-grid with a pitch of $10{\mu}m$. We also established a new optical model for the second-generation surface encoder that utilizes diffraction and interference to generate its measured values. The 2-D sine-grid was fabricated on a workpiece by an ultra precision lathe with the assistance of a fast tool servo. We then performed a UV-casting process to imprint the sine-grid on a transparent plastic film and constructed an experimental setup to realize the second-generation surface encoder. We conducted tests that demonstrated the feasibility of the proposed surface encoder model.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.674-686
• /
• 2019

In this paper, we will discuss the absolute angular error control mode for the Gun/Turret driving system. The Gun/Turret driving controller receives absolute angular error calculated from the fire control system (FCS). Thus, the Gun/Turret driving controller is subjected to step command to cause residual vibration and system unstable. In order to reduce residual vibration and to ensure the system stability, we propose an error motion profile method with two types of trapezoidal and S-Curve. The validity of the proposed error motion profile method is confirmed via simulation by observing that the resulting position error, driving power, and power density satisfied the control performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.5
• /
• pp.554-562
• /
• 2012

Processing of Scanning electron microscope imaging has been analyzed in both secondary electron (SE) imaging and backscattered electron (BSE) image. Because of unique characteristics of both secondary electron and backscattered electron image, mechanism of imaging process and image quality are quite different each other. For the sake of characterize imaging process, Monte Carlo simulation code have been developed. It simulates electron penetration and depth profile in certain material. In addition, secondary electron and backscattered electron generation process as well as their spatial distribution and energy characteristics can be simulated. Geometries that has fundamental feature have been imaged using the developed Monte Carlo code. Two, SE and BSE images generation process will be discussed. BSE imaging process can be readily used to discriminate in both material and geometry by simply changing position and direction of BSE detector. The developed MC code could be useful to design BSE detector and their position. Furthermore, surface reconstruction technique is possibly developed at the further research efforts. Basics of Monte Carlo simulation method will be discussed as well as characteristics of SE and BSE images.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.445-450
• /
• 1997

Self-Powered Neutron Detectors(SPNDs) are currently used to estimate the power generation distribution and fuel burn-up in several nuclear power reactors in Korea. In this paper, Monte Carlo simulation is accomplished to calculate the escape probability of beta particle as a function of their birth position fur the typical geometry of rhodium-based SPNDs. Also, a simple numerical method calculates the initial generation rate of beta particles and the change of generation rate due to rhodium burn-up. Using the simulation and the numerical method, the burn-up profile of rhodium density and the neutron sensitivity are calculated as a function of burn-up time in the reactor. The sensitivity of the SPNDs decreases non-linearly due to the high absorption cross-section and the non-uniform burn-up of rhodium in the emitter rod. In addition, for improvement of some properties of rhodium-based SPNDs which are currently used, this paper presents a new material. The method used here can be applied to the analysis of other types of SPNDs and will be useful in the optimum design of new SPNDs for long term usage.

• Transactions of Materials Processing
• /
• v.15 no.6 s.87
• /
• pp.459-466
• /
• 2006

Trimming line design plays an important role in obtaining accurate edge profile after flanging. Compared to the traditional section-based method, simulation-based method can produce more accurate trimming line by considering deformation mechanics. Recently, the use of a finite element inverse method is proposed to obtain optimal trimming line. By analyzing flanging inversely from the final mesh after flanging, trimming line can be obtained from initial mesh on the drawing die surface. Initial guess generation fer finite element inverse method is obtained by developing the final mesh onto drawing tool mesh. Incremental development method is adopted to handle irregular mesh with various size and undercut. In this study, improved incremental development algorithm to handle complex shape is suggested. When developing the final mesh layer by layer, the algorithm which can define the development sequence and the position of developing nodes is thoroughly described. Flanging of front fender is analyzed to demonstrate the effectiveness of the present method. By using section-based trimming line and simulation-based trimming line, incremental finite element simulations are carried out. In comparison with experiment, it is clearly shown that the present method yields more accurate edge profile than section-based method.