• 오토저널
• /
• 제10권5호
• /
• pp.42-53
• /
• 1988

The effects of ignition position on combustion in a chamber with swirl flow were investigated by use of hot wire anemometer, high speed schlieren photography, and chamber pressure measurement. In experiments, the closed-constant volume combustion chamber was used, and the swirl was formed unsteadily by suction of external fluid after reducing pressure in the chamber. Results show that the effect of ignition position on combustion depends on the flow state and the flame propagation distance corresponding to each ignition position. Also, the effect of combustion promoting increases as an ignition position moves from the center of chamber to the outside, but maximum burning pressure was obtained at the position that is the shortest flame propagation distance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.114-115
• /
• 2014

This paper proposes a new speed and position estimation method for PMSM(Permanent Magnet Synchronous Motor) using low-resolution hall-effect sensors. In general, there are a variety of sensors to estimate rotor position for PMSM such as resolvers, and encoders. Position detection using hall-effect sensors that detect the flux of the rotor for rotor position is excellent method in terms of cost and space, but has low-resolution. To overcome this problem, this paper proposes a new speed and position estimation observer. The performance of the observer has been verified by simulations carried out using Matlab/Simulink.

• Journal of Power Electronics
• /
• 제5권1호
• /
• pp.62-66
• /
• 2005

A simple fault correction method for rotor position detection of a brushless DC(BLDC) motor with trapezoidal back EMF(electromotive force) using a Hall effect latch unit is presented. The reason why the Hall effect latch unit does not operate properly during the startup of a BLDC motor is thoroughly explained. To solve this problem, a simple code change method and its hardware implementation issues are proposed and discussed.

• The Journal of Korean Physical Therapy
• /
• 제24권2호
• /
• pp.57-65
• /
• 2012

Purpose: This study was to investigate the effect of biomechanical intervention, based on the custom seating system on the activities of a mouse click for children with cerebral palsy. Methods: Thirteen children with cerebral palsy participated in this study. We compared reaction time and frequency for proper mouse click in the subject's typical position, in addition to an intervention position. The intervention position conformed to the principle and practice of research on promoting the upper-extremity movement and postural control. The intervention position was achieved through an external postural support, which was based on the custom seating system. Results: Reaction time and frequency for proper mouse click were moderately improved in the intervention position, compared with that of the typical position. There was a statistically significant difference between the typical position and that of the intervention position (p<0.05). Conclusion: Results provide evidence of the positive effects of functional seating on the activities of a mouse click for children with cerebral palsy.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.931-938
• /
• 2016

Application of vector control scheme for consumer products is enlarging to improve control performance. For the field-oriented control, accurate position detection is essential and generally requires expensive sensors. On the other hand, cost-reduction is important in home appliances, so that binary-type Hall-effect sensors are commonly used rather than using an expensive sensor such as an encoder. The control performance is directly influenced by the accuracy of the position information, and there exist non-uniformities related to Hall sensors in electrical and mechanical aspects, which result in distorted position information. Therefore, to get high-precision position information from low-resolution Hall sensors, this paper proposes a new position estimator consisting of a Kalman filter and feedforward compensation scheme, which generates a linearly changing position signal. The efficacy of the proposed scheme is verified by simulation and experimental results carried out with a 48-pole permanent magnet motor.

• 한국자동차공학회논문집
• /
• 제25권2호
• /
• pp.179-189
• /
• 2017

This paper is the fifth investigation on the methods of evaluating flow characteristics in a steady flow bench. In previous studies, several assumptions used in the steady flow bench were examined and it was concluded that the assumption of the solid rotation may lead to serious problems. In addition, though the velocity profiles were improved as the measuring position went downstream, the distributions were far from ideal regardless of the valve angle and evaluation position. The eccentricities were also not sufficiently small to disregard the effect on impulse swirl meter (ISM) measurement. Therefore, the effect of these distribution and eccentricity changes according to the positions needs to be analyzed to discuss the method of flow characteristics estimation. In this context, the effects of evaluation position on the steady flow characteristics were studied. For this purpose, the swirl coefficient and swirl ratio were assessed and compared via measurement of the conventional ISM and calculation based on the velocity by particle image velocimetry(PIV) from 1.75B, 1.75 times bore position apart from the cylinder head, to the 6.00B position. The results show that the swirl coefficients by ISM strictly decrease and the curves as a function of the valve lift become smooth and linear as the measuring position goes downstream. However, the values through the calculation based on the PIV are higher at the farther position due to the approach of the tangential velocity profile to ideal. In addition, there exists an offset effect between the velocity distribution and eccentricity in the low valve lift range when the coefficients are estimated based on the swirl center. Finally, the curve of the swirl ratio by ISM and by PIV evaluation as a function the measuring position intersect around 5.00B plane except at $26^{\circ}$ valve angle.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1366-1370
• /
• 2010

This paper supposes the vector control algorithm to estimate the rotor position of permanent magnet synchronous traction motor using the hall-effect sensor. The hall-effect provides 60 electrical degrees resolution in rotor position sensing and it is very low resolution. The algorithm makes resolution high as optical encoders or electromagnetic resolver. If necessary, the reference rotor position angle is controlled by adjusting the variable. When a rotor position sensor such as either a optical encoder or a electromagnetic resolver is misalignment, it is useful to align with those. The method on adjusting the reference rotor position angle can compensate for misalignment error degrees by 60 electrical degrees.

• 대한간호학회지
• /
• 제21권2호
• /
• pp.204-217
• /
• 1991

The purpose of this study is to verify the effect of lateral position and chest percussion on gas exchange in the decreased level of conscious patients. The Subjects for this study were 21 patients' admitted in ICU of CNUH from Dec 18th, 1989 to Aug 4th, 1990. The Data was analyzed by paired t - test. The results of this study as follows ; 1) In comparison of supine position, good -lung dependent position and good - lung dependent with chest percussion, the difference of PaO ㆍ was statistically significant (P＜0.05). 2) In comparison of supine position, good -lung dependent position and good - lung dependent with chest percussion, the difference of A-a Do ㆍ was statistically significant (p＜0.05). En conclusion, the use of good -lung dependent position and chest percussion was effective nursing intervention on decreased level of conscious patients in ICU.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.315-317
• /
• 2003

This paper deals with the position control of an AC servo motor using linear hall-effect sensors. The price of these is very low, but it is possible to make position control of motor similar to a control using an encoder. This paper introduces the design of motor using linear hall-effect sensors and shows the results of control.

• 문화기술의 융합
• /
• 제1권2호
• /
• pp.91-95
• /
• 2015

본 연구는 앉은 자세에서 골반의 경사도에 따른 음성의 변화를 관찰하여 자세에 따른 치료적 접근을 고려하고자 그 목적이 있다. 골반경사의 3가지 자세를 Praat program을 이용하여 음성의 변화를 측정하였다. 세 가지 유형의 앉은 자세에 따라 pitch값의 변화가 통계학적 유의미한 차이를 보였다. 그 중에서도 전방경사에 비해 중립에서 현저히 낮은 피치값을 나타내어 유의한 차이가 있었다. 본 연구의 결과를 통해 우리는 골반의 중립적인 경사자세가 가장 안정적인 발성형태를 나타내었다.