• Korean Journal of Remote Sensing
• /
• v.9 no.2
• /
• pp.7-19
• /
• 1993

In stereo vision, when we use two parallel axis images, small portion of object is contained and B/H(Base-line to Height) ratio is limited due to the size of object and depth information is inaccurate. To overcome these difficulities we take a non-parallel axis image which is rotated $\theta$ about y-axis and match other parallel-axis image. Epipolar lines of non-parallel axis image are not same as those of parallel-axis image and we can't match these two images directly. In this paper, we transform the non-parallel axis image geometrically with camera parameters, whose epipolar lines are alingned parallel. NCC(Normalized Cross Correlation) is used as match measure, area-based matching technique is used find correspondence and 9$\times$9 window size is used, which is chosen experimentally. Focal length which is necessary to get depth information of given object is calculated with least-squares method by CCD camera characteristics and lenz property. Finally, we select 30 test points from given object whose elevation is varied to 150 mm, calculate heights and know that height RMS error is 7.9 mm.

• The Journal of Internal Korean Medicine
• /
• v.42 no.5
• /
• pp.1062-1073
• /
• 2021

Objectives: This study examined the case of a patient with recurrent salivary duct carcinoma and hepatic metastasis. Methods: The patient was treated with Casodex/Nolvadex from January 25^th 2021 onward with doses of bicalutamide (150 mg/day) and tamoxifen (10 mg/day) every four weeks. Simultaneously, the patient was treated with Korean medicine. The tumor size was measured using computed tomography (CT). Adverse events were evaluated according to the National Cancer Institute's Common Terminology Criteria for Adverse Events (NCI-CTCAE), version 5.0. Results: Following the four-month treatment, the extent of the proximal portion of hepatic metastasis decreased, and discomfort and physical activity gradually improved. Conclusions: The results suggest that combined chemotherapy and Korean medicine may help to reduce tumor size and improve quality of life.

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.249-256
• /
• 2019

The 9Cr-1Mo ferritic-martensitic ODS steel is a promising structural material for the next generation nuclear power plants including fast reactors for application in reactor vessels and nuclear fuel. The ODS steel was cooled down by furnace cooling, air cooling, oil quenching and water quenching, respectively, after normalizing it at $1150^{\circ}C$ for 1 h and then tempering at $780^{\circ}C$ for 1 h. It is found that grain size, a relative portion of ferrite and martensite, martensitic lath configuration, behaviors of carbide precipitates, and hardness of the ODS steel are strongly dependent on a cooling rate. The grain size and martensitic lath width become smaller with the increase in a cooling rate. The carbides were precipitated at the grain boundaries formed between the ferrite and martensite phases and at the martensitic lath interfaces. In addition, the carbide precipitates become smaller and more widely dispersed with the increase in a cooling rate, resulting in that the faster cooling rate generated the higher hardness of the ODS steel.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.26 no.2
• /
• pp.101-114
• /
• 2024

Currently, in Korea, the number of handicapped children receiving inclusive education in general schools is expanding. In the inclusive education field, the most important tasks are personal needs support, such as toilet assistance, meal assitance, and support for wearing and taking off various assistive devices. A significant portion of the support work in the actual education field is related to clothing. Therefore, it is necessary to research and develop universal fashion designs for handicapped children at school where inclusive education is implemented. To achieve this aim, this study analyzed the concepts, principles and, characteristics of universal fashion design through theoretical research and established research principles. In this study, two fact-finding surveys were conducted. Next, a total of 10 universal fashion designs were proposed considering both the preceding survey results and the principles of universal fashion design Among them, the four designs that were considered most suitable were selected for universal fashion design through F.G.I (Focus Group Interview) analysis conducted by experts. The four selected designs were made by referring to the size framework based on the '6th Human Body Size Survey Report of Korea'. The completed experimental clothes were proposed as the final universal fashion design for handicapped children by conducting external evaluation through a virtual clothing system and real clothes.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.1
• /
• pp.37-46
• /
• 2011

To design a beautiful hood fitting an unspecific individual, focusing on body parts such as the head, neck and shoulder requires body size and type information, which applied by physical factors like size, types, and movements, etc. These parts consist of complicated types and structures. Accurate information should be a priority due to great individual differences and low correlation with other body parts. However, there is not a lot of detailed physical information nor design methods for hood design. Therefore, the purpose of this study is to select a study sample "hood" which is a recently emerging fashion item and to expand the necessary physical information for pattern design and draw body size of wearing part on Hood like head, cerbical portion and shoulder. Extract factors to consist on types and after divided into several types, a study comparing each type's physical characteristics was conducted. In order to do that, body measurement data have been collected by statistical treatment and analyzed reference with statistical treatment. The results of the study are predicted to be important data to develop various hood designs for the recent fashion trend. Factor analysis was conducted through main composition analysis about direct measured item on human body and index items. The results of factor analysis, composed factors of body type in this research object were extracted in total of 3 factors. To categorize the head, neck and shoulders of women in their early 20s women and determine their characteristics, variances with factor analysis became operative for Cluster analysis. With these clusters, women in their early 20s were categorized into three types. The results of this study are considered to affect largely for higher physical suitability on unspecified individuals when allowed absence of reference and the fact that body size only limited to item 'head circumstance' in terms of making hat and hood in the case of recent Korea. For the future, an experimental study of hood production should be conducted by using basic data from this study.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.386-392
• /
• 2016

Heat insulation plates of fumed silica were prepared by mixing fumed silica, SiC powder and chopped glass fiber by a high speed mixer followed by pressing of the mixture powder in a stainless steel mold of $100{\times}100mm$. Composition of the plates, particle size of SiC, and type of inorganic binder were varied for observation of their contribution to heat insulation of the plate. The plate was installed on the upper portion of an electric furnace the inside temperature of which was maintained at $400^{\circ}C$ and $600^{\circ}C$, for investigation of heat transfer through the plate from inside of the electric furnace to outside atmosphere. Surface temperatures were measured in real time using a thermographic camera. The particle size of SiC was varied in the range of $1.3{\sim}17.5{\mu}m$ and the insulation was found to be most excellent when SiC of $2.2{\mu}m$ was incorporated. When the size of SiC was smaller or larger than $2.2{\mu}m$, the heat insulation effect was decreased. Inorganic binders of alkali silicate and phosphate were tested and the phosphate was found to maintain the heat insulation property while increasing mechanical properties.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.240-250
• /
• 1998

This study is to have attempted to analyze the characteristics of the change in forest landscape pattern of Seoul for 18 years by grasping it through satellite image data on the forest area in Seoul where a rapid change according urbanization and industrialization is going on. On the basis of Landsat MSS data- satellite image data, this writer analyzed the change in the number and size of patch and the mean edge length of each forest land, and the index of patch shape by each year from a landscape -ecological point of view. The results are as follows; First, in the pattern change of the forest patch of Seoul, the highest patch fragmentation area is the forest of the Yangchon-gu district where is decreasing it forest area by 654ha, 511ha, 495ha, 402ha each year from its total size of 742ha in 1979. Second, the change tendency shows that the average forest size decreased at 552.58ha in 1983, 435.03ha in 1988, 396.23ha in 1992, and 379.96ha in 1996. And analysis showed that even in the number of patches, the forest fragmentation phenomenon was presenting by the increase of development disturbance. Third, the mean edge by year was longest at 23,385m in 1979, but it is decreasing continuously. This shows the regular and artificial uniformity of forest landscape by disturbance-effect increase of the built-up development and shows low portion against edge effect by the time-series change like 1979>1983>198>1992>1996. Finally, in the analysis of a shape index indicated by ratio of size and edge, total averages were 2.56, 2.33, 2.17, 2.14, 2.14 each year, so that it is considered that the disturbance and ecological health status against forest landscape can be grasped according to being examined as 1979>1983>1988>1992, 1996 by the time-series change of the landscape.

• Spatial Information Research
• /
• v.10 no.1
• /
• pp.61-76
• /
• 2002

Mobile map services using PDA are prevailing because of the rapid developments of techniques of the internet and handhold devices recently. While the volume of spatial data is tremendous and the spatial operations are time-intensive, the PDA has small size memory and a low performance processor. Therefore, the spatial index for PDA should be small size and efficiently filter out the candidate objects of spatial operation as well. This paper proposes a spatial index far PDA called MHF(Multilevel Hashing File). The MHF has simple structure for storage efficiency and uses a hashing technique, which is direct search method, for search efficiency. This paper also designs a compression technique for MBR. which occupies almost 80% of index data in the two dimensional case. We call it HMBR. Although the HMBR technique reduces the MB\ulcorner size to almost a third, it shows good filtering efficiency because of no information loss by quantization in case of small objects that occupy a major portion. Our experimental tests show that the proposed MHF index using HMBR technique is appropriate for PDA in terms of the size of index, the Number of MBR comparisons, the filtering efficiency and the execution time of spatial operations.

• Korean Journal of Ichthyology
• /
• v.25 no.3
• /
• pp.157-162
• /
• 2013

The feeding habits of spearnose grenadier (Coelorinchus multispinulosus) were studied using 361 specimens collected from January to December 2005~2006 in the coastal waters off Gori, Korea. The size of C. multispinulosus ranged from 1.5 to 8.5 cm in anal length (AL). C. multispinulosus was crustacean feeder that consumes mainly consumed shrimps and amphipods. Its diet also included small quantities of copepods, mysids, cumaceans, stomatopods, crabs, polychaetes and fishes. C. multispinulosus mainly consumed shrimps in all size classes and seasons except the smallest size class in summer which mainly consumed amphipods. Smaller individuals secondly consumed amphipods, copepods and mysids, and the portion of these prey items in the total diet decreased as body size.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.6
• /
• pp.694-703
• /
• 2012

To understand the characteristics of sedimentary and benthic environments in habitats of naturally-occurring intertidal benthic macroalgae, various geochemical parameters of sediment (grain size, ignition loss [IL], chemical oxygen demand [COD], and acid volatile sulfur [AVS]) and pore water (temperature, salinity, pH, and nutrients) were measured in the southern intertidal zone of Hampyeong Bay at two month intervals from April to October 2009. Ecological characteristics including the distribution and biomass of benthic macroalgae were also investigated. Benthic macroalgae were distributed below 4 to 5 m depth from mean sea level near the lower portion of the intertidal zone where air exposure time is relatively short. The distribution area and biomass of benthic macroalgae gradually decreased during the study period. The surface sediments in the benthic algal region were mainly composed of finer sediments, such as slightly gravelly mud and mud. The temperature, salinity, pH, and nutrient concentrations (except dissolved inorganic nitrogen) in pore water did not differ in regions with and without benthic macroalgae, whereas the mean grain size and the concentrations of IL, COD, and AVS in sediments were much higher in regions harboring benthic macroalgae. The correlation between mean grain size and IL in sediments displayed two distinct gradients and the slope was much steeper in regions harboring benthic macroalgae, indicating that the content of organic matter in benthic algal region is not solely dependent on mean grain size. Our results indicate that the benthic macroalgae in the southern intertidal zone of Hampyeong Bay play an important role in the accumulation of organic matter in sediment.