• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1047-1052
• /
• 2009

As buildings nowadays become taller in height and larger in size the safety review of lifting plan takes larger portion in construction project management. However, the cost and safety in lifting plan have a contradictory effect on each other. Therefore, an optimization algorithm needs devising as a solution of the contradictory problem. In many cases at construction sites, selections and stability review of tower cranes are assigned to equipment suppliers or field managers, which cause the problems in safety and cost of the projects. To improve the part of the current situation, a study on the optimization algorithm for designing the foundation of tower cranes is conducted in this study, which can be utilized by equipment suppliers or field managers to check the stability of tower cranes easily and promptly without substantial knowledge.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.771-782
• /
• 2000

In this paper, an H.263 video codec is implemented by adopting the concept of hardware and software co-design. Each module of the codec is investigated to find which approach between hardware and software is better to achieve real-time processing speed as well as flexibility. The hardware portion includes motion-related engines, such as motion estimation and compensation, and a memory control part. The remaining portion of theH.263 video codec is implemented in software using a RISC processor. This paper also introduces efficient design methods for hardware and software modules. In hardware, an area-efficient architecture for the motion estimator of a multi-resolution block matching algorithm using multiple candidates and spatial correlation in motion vector fields (MRMCS), is suggested to reduce the chip size. Software optimization techniques are also explored by using the statistics of transformed coefficients and the minimum sum of absolute difference (SAD)obtained from the motion estimator.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.4
• /
• pp.305-323
• /
• 2017

Objective: The purpose of this study was to determine breast shape and ratio of breast enlargement women prior to development of breast enlargement patient's bra. Background: Although there are many previous studies on women's breast that did not undergo breast augmentation surgery, no studies have examined the breast type and proportion of women with breast augmentation. Method: In this study, we analyzed ratios and angles with photographs taken before and after breast augmentation on the frontal and lateral views of the breast, UPF and projection were analyzed too. We also compared the pre-operative and post-operative rates with those of previous breast studies, as well as the post-operative breast types for the desirable breast types. Results: The length and width of the breast base and the height of the breast projection increased after the operation. The rate of increase in width is larger than the vertical distance in the breast base, and the rate of increase in height of the projection is larger than the increase in the width. Specifically, in the vertical distance, the rate of increase in the lower portion is larger than that in the upper portion. In the width, the rate of increase on the inside is larger than that on the outside. Conclusion: The angles of the static relationship with the projection increased and the angles of the minor relation decreased. The changes in the size of the breast were visually observed in the overlapping of the triangle shape before and after the surgery. The changes were composed of the line connecting the angle and the measurement points. The pre-operative upper pole fullness (UPF) was mostly 0 and - 1, but after the surgery, +1, 0, -1, +2 were distributed, while post-operative levels of projection were distributed in the order of level 3> level 1> level 2. In comparison with the desirable breast type, it was found that the anatomical type was a more natural breast type than the round type of implant. Application: These results can be useful as basic data for the breast analysis of breast enlargement patients and their bra patterns.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.179-190
• /
• 2001

In this proposed study, observing and analyzing contrast enhanced abdominal CT images, we segmented the liver automatically. We computed the ratio of each gray value from the estimated gray value range. With the average value of mesh image, we distinguished the liver from the noise parts. We divided the region based on immersion simulation. The threshold value is determined from the mesh image which is generated from each gray value portion of the liver and is used in dividing the liver to the noise region. To get the outline of the liver, we generated template image which represents the lump of the liver, and subtracted it from the binary image. With the results we use the proposed algorithm using 8-connectivity instead of the present opening algorithm, to reduce the processing time. We computed the volume from the segmented organ size and presented a clinical demonstration with the animal experiment

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.671-675
• /
• 2010

Purpose: In order to maintain corrected nasal tip projection, strong support is important. Authors used calvarial bone graft method for this purpose. Patients were followed up about permanency of the bone graft for a long time. Methods: From 1995 to 1998, author performed calvarial bone graft on 30 adult patients with secondary cleft lip and nose deformity. Patients were observed for 34 months. There were no specific complications, and results were satisfactory. We could confirm the permanence of the calvarial bone graft in 3 patients by photography and radiologic studies for 10 years follow-up. Results: None of the patients showed size change or displacement. But the portion of graft facing the tip was absorbed resulting in loss of tip projection and short nose in two patients. One patient had fracture on the middle of the graft. This caused depression from lower portion of the dorsum to the tip. Conclusion: Despite of autogenous grafts such as calvarial bone, absorption of the bone may occur when compressed with tension for a long period. And the graft in the nasal tip not having any contact with the nasal bone may cause absorption of the graft.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.135-151
• /
• 1982

In order to investigate the effectiveness of Osmose process for the practical treatment of wood this study has been made using water soluble preservatives such as Malenit and chromated zinc chloride. The results obtained in this investigation are as follows: 1. The penetration of Malenit in sapwood has been observed deeper than that of chromated zinc chloride for all species tested in this investigation. 2. The penetration of preservatives applied in soft wood, ie. Pinus densiflora and Larix leptolepis has been observed better results than that of hard wood, i.e., Quercus accutissima and Carpinus laxiflora. 3. The longer stack covering, despite of preservatives applied and size of wood tested, has given better penetration for all species tested, and the fastest diffusion has been occured in 15 days from they day started. Following after 15 days diffusion had gradualy become slower. 4. The length of time needed for effective penetration has taken 45 days for all species tested, reaching twenty millimeters (20mm) in depth in case of Malnit, that means also more than 50% of penetration into sapwood portion. However it has taken 45 days fer Pinus densiflora and Larix leptolepis, reaching fifteen millimeters (15mm) and 60 days for Quercus accutissima and Carpinus laxiflora, reaching same fifteen millimeters in case of chromated zinc chloride, that means also less than 50% (except 50% for Larix) of penetration into sapwood portion. 5. Deeper penetration of preservatives from the wood surface has been observed in the larger wood than the smaller wood for all species tested, although the penetration ratio between the width of sapwood and the length penetrated has been observed smaller in larger wood than smaller wood. 6. The relation between moisture content of wood and the penetration of preservatives into wood tested has shown the linear regression, that is, the more moisture content brought the deeper penetration. 7. Following the result obtained at this investigation osmose process with Malenit applied has indicated as a useable process for the none pressure treatment of wood.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1766-1777
• /
• 2000

In multimedia new service on the internet, there are problems such as server overload, network congestion and initial latency. To overcome these problems, we propose a proxy push-caching scheme that stores a portion of continuous media stream or entire stream, and a transmission scheme of NOD continuous media, RTP-RR and RTP-nR to exploit push-caching scheme. With the proposed push-caching scheme, NOD server pushes fixed portion of stream to a proxy when new data is generated, and the cached size of each stream changes dynamically according to the caching utility value of each stream. As a result, the initial latency of client side could be reduced and the amount of data transmitted fro ma proxy server to client could be increased. Moreover, we estimate a caching utility value of each stream using correlation between disk space occupied by the stream and the amount of data stream requested by client. And we applied the caching utility value ot replacement policies. The performance of the proxy push-caching and continuous media transmission schemes proposed were compared with other schemes using simulations. In the simulation, these schemes show better results than other schemes in terms of BHR (Byte Hit Rate), initial latency, the number of replacement and packet loss rate.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.19
• /
• pp.7-31
• /
• 2003

The governments of almost countries have the rules and procedures that the purchasing entities have to follow, in order to ensure that the best value for money spent is obtained in procuring goods and services. However, there are often some of important problems in their rules relating to government procurement. Namely, almost countries have a variety of discriminatory regulations for foreign suppliers in the government procurement laws with the object of national security, economic welfare, and protection of domestic market from international competition. For this reason, several advanced countries had reached the Plurilateral Agreement on Government Procurement during Tokyo Round(1973-1979) and Uruguay Round(1986-1994). However, the provisions of two agreements do not apply to all products made by the government but only to those made by purchasing entities specified by each member country in its list in the Appendix. Accordingly, the size of goods and services purchased from foreign suppliers were comparatively not large. As we know well, the United States have spent a large amount of money from federal and state government budget. But the portion of procurement from foreign suppliers is still small, compared with the portion of procurement from domestic suppliers. The main reason are that U.S. has applied for long time the so-called Buy American Act to government procurement positively and maintained many kinds of other domestic regulations which have discriminatory provisions for foreign goods and foreign suppliers. On the recognition of these points, this thesis deals with the Buy American Act and other U.S. domestic laws, regional and bilateral, and plurilateral agreements including WTO Agreement on Government Procurement. As a result, the author found that there are several concerns and problems in the U.S. regulations relating to government procurement. It include the provisions on priority procurement of U.S.-produced products, local contents requirements, set-aside procurement from small business, and exclusion of preferential procurement from the developing countries.

• Current Photovoltaic Research
• /
• v.2 no.4
• /
• pp.182-188
• /
• 2014

For the dissemination of new and renewable energy, Korean government introduced a renewable portfolio standard (RPS) scheme in 2012 after terminating feed-in tariff (FIT) scheme that was introduced in 2004. With the RPS scheme, 64.7% of its own goal (95.7% in PV and 63.3% in non-PV) was achieved in 2012 and 67.2% of that (94.9% in PV, 65% in non-PV) was achieved in 2013. The deployment of PV systems met the goal very well and that of non-PV did not. Recently, Korean government revised the target year of supplying 10% electricity from new and renewable energy from 2022 to 2024 and released a couple of measures on PV area. Recent studies showed that the bankability of a project plays a key role for PV dissemination. Therefore, the dissemination should be assessed from the point of bankability under the RPS scheme and a little adjustment is necessary to achieve the goal. Especially, installing a small size PV (<100 kwp) system needs a minimum REC price or a FIT scheme. In non-PV area, permission process is a common bottleneck and the related regulation should be eased. In addition, to achieve the long term goal, an implementing scenario has to be prepared. Currently, the portion of the waste-gas energy originated from fossil fuel is too large among the new and renewable energy sources and the portion should be lowered or eliminated in the 10% of electricity supply goal. Seoul Metropolitan Government (SMG) has its own FIT scheme for PV dissemination from 2014 SMG and revised the PV tariff from 50 to 100 won/kwh in effective of 2015. It is worth to spread the other provinces.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6542-6549
• /
• 2013

In highly elevated piers and long span beams, a hollow section is often used to reduce the self-weight and increase the flexural rigidity of members. Numerical analysis was conducted to obtain the moment-curvature curves and curvature ductility factor for the RC hollow section beams under a range of hollow portion sizes and reinforcement conditions in the upper flange and web. The curvature ductility factor was constantly maintained until the hollow portion size($b_i/b_o/h_i/h_o$) was less than or equal to 0.5. The curvature ductility factor decreased sharply if ($b_i/b_o/h_i/h_o$) was 0.7 or more. The curvature ductility factor of the beam decreased if reinforcement was provided in the web of the RC hollow section beam. To obtain the same level of the ductility factor as the singly reinforced section, the reinforcement should be provided in the upper flange as much as the web reinforcement.