• 한국산학기술학회논문지
• /
• 제13권1호
• /
• pp.382-389
• /
• 2012

위조된 보고서 공격은 무선 센서 네트워크에서 이벤트가 발생한 위치에 대한 송신 응답과 같은 거짓 경보를 야기하는 것뿐만 아니라 제한된 량의 에너지를 고갈시킨다. 본 논문에서는 위조된 보고서를 필터링하기 위해 확률적인 보안 필터링 기법(PFSS: Probabilistic Filtering method for Sensor network Security)을 제안한다. 제안 내용은 클러스터 헤드와 기지국과의 거리를 이용하여 기지국까지의 중간 클러스터 헤드가 검증 노드인지를 확률적으로 선택하여 보안 검증에 필요한 에너지를 줄이고, 보안 처리에 따른 핫 스팟 문제를 완화시킨다. 제안된 기법의 성능은 수식 분석과 실험을 통하여 분석하였으며, 이를 통하여 제안된 기법이 기존의 보안 검증 처리에 비해 효율적임을 알 수 있다.

• 한국재료학회지
• /
• 제25권11호
• /
• pp.598-601
• /
• 2015

Using reverse micelle processing, $ZnAl_2O_4$ nanopowders were synthesized from a mixed precursor(consisting of $Zn(NO_3)_2$ and $Al(NO_3)_3$). The $ZnAl_2O_4$ was prepared by mixing the aqueous solution at a molar ratio of Zn : Al = 1 : 2. The average size and distribution of the synthesized powders with heat treatment at $600^{\circ}C$ for 2 h were in the range of 10-20 nm and narrow, respectively. The average size of the synthesized powders increased with increasing water to surfactant molar ratio. The XRD diffraction patterns show that the phase of $ZnAl_2O_4$ was spinel(JCPDS No. 05-0669). The synthesized and calcined powders were characterized using a thermogravimetric - differential scanning calorimeter(TG-DSC), X-ray diffraction analysis (XRD), and high resolution transmission electron microscopy(HRTEM). The effects of the synthesis parameter, such as the molar ratio of water to surfactant, are discussed.

• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1661-1669
• /
• 2010

본 논문에서는 센서 네트워크의 수명을 길게 하기 위해 클러스터 헤드에 집중된 에너지 과부하를 클러스터 그룹 헤드와 클러스터 헤드로 분산시켜서 에너지 소모량을 감소시키는 유전 알고리즘 기반의 에너지 효율적인 클러스터링(ECGA: Energy efficient Clustering based on Genetic Algorithm)을 제안한다. ECGA 알고리즘은 예상 에너지 비용 합계, 센서 노드 에너지 잔량의 평균 및 표준 편차를 구하여 이를 적합도 함수에 적용하였다. 이 적합도를 이용하여 최적의 클러스터 그룹 및 클러스터를 형성한다. 실험을 통하여 ECGA 알고리즘이 이전의 클러스터링 기법보다 에너지 소모를 줄이고 네트워크의 수명을 연장시켰음을 보였다.

• 한국재료학회지
• /
• 제23권11호
• /
• pp.625-630
• /
• 2013

In this study, intermediate-mixed powders were prepared by loading zirconia powders initially in a ball-mill jar and loading alumina powders afterward; the initial-mixed powders were produced by loading zirconia and alumina powders together in the ball-mill jar. The effect of such differences in mixing method on the mechanical properties was investigated. In intermediate-mixed powders, the volume fraction of large particles slightly increased and, simultaneously, zirconia particles formed agglomerates that, due to early ball-mill loading of the zirconia powders only, were more dispersed than were the initial-mixed powders. For the intermediate-mixed powders, zirconia agglomerates were destroyed more quickly than were initial-mixed powders, so the number of dispersed zirconia particles rose and the inhibitory effect of densification due to the addition of a second phase was more obvious. In the microstructure of intermediate-mixed powders, zirconia grains were homogeneously dispersed and grain growth by coalescence was found to occur with increasing sintering temperature. For the initial-mixed powders, large zirconia grains formed by localized early-densification on the inside contacts of some zirconia agglomerates were observed in the early stages of sintering. The intermediate-mixed powders had slightly lower hardness values as a whole but higher fracture toughness compared to that of the initial-mixed powders.

• 대한안전경영과학회지
• /
• 제12권4호
• /
• pp.183-190
• /
• 2010

This paper selects length of berth, area of yard, unloading capacity and number of berth as the input indexes, and cargo turnover as output index to research the source of TFP(Total Factor Productivity) growth of 23 main ports in Korea. The major conclusions are as follows. The TFP of the trade ports in Korea is at the fluctuating stage, but it generally displays a rising trend, and it’s growth originate from the growth of technical efficiency. The Growth rates of TFP of trade ports in the different areas are different, and the sources of growth are also different, but the changing trends are basically the same. Four major factors to the increase of TFP are following: competition between ports, reform of property system, harbor-hinterland economic and international trade, modeling, imitation and innovation in management, technology and system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1520-1522
• /
• 2003

Molecular self-assembled of surfactant viologen are of recent interest because they can from functional electrodes as well as micellar assemblies, which can be Profitably utilized for display devices, photoelectrochemical studies and electrocatalysis as electron acceptor or electron mediator. Fromherz et al studied the self-assembly of thiol and disulfide derivatives of viologens bearing long n-alkyl chains on Au electrode surface. The electrochemical behavior of self-assembled viologen monolayer has been investigated with QCM, which has been known as nano-gram order mass detector. The self-assembly process of viologen was monitored using resonant frequency (${\Delta}$F) and resonant resistance (R). The redox process of viologen was observed with resonant frequency (${\Delta}$F).

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.201-207
• /
• 2020

With the expansion in the use of DC power systems and increased need for system maintenance, the development of measurement devices for maintenance requires high stability. Of the different kinds of DC current measurement devices, the single-shot measurement device causes the input signal of the current measuring unit to initially generate a high inrush current. The high inrush current flows into the signal processor of the meter, shortening the life of the internal fuses and causing failure. Therefore, in this study, the I²t value for increasing the durability of the fuse is designed using the available wire diameter. Operating characteristics for 210~400% over-current of the rated current, which is relatively low over-current, are realized by the plating of low melting tin metal. As a result, a method of designing a fuse element for a DC power supply, which improves the safety of the DC current measurement device by blocking the failure caused by the inrush current, is presented.

• 한국전기전자재료학회논문지
• /
• 제32권4호
• /
• pp.327-332
• /
• 2019

Recently, inverter control systems have attracted immense attention to increase the energy efficiency. However, such systems use repeated on/off high currents for linear operation control, instead of the prevalent step variable current control method. Hence, there arise concerns of personal and property damage, especially due to the durability, explosive characteristics, and operating speed of the fuse, which is responsible for safety and is one of the internal components using current control. Therefore, in this paper, we propose an IEC60127-4 SMD sub-miniature fuse, consisting of Ag-Cu alloys and ceramic powder for arc soothing. The IEC60127-4 SMD sub-miniature fuse has high durability and cut-off capacity, and operates safely in dangerous circumstances caused by the inverter control system.

• 한국전자통신학회논문지
• /
• 제17권1호
• /
• pp.187-192
• /
• 2022

현재 컨테이너 항만은 최신의 정보통신 기술을 활용한 자동화된 운영시스템에 의해 규격화된 컨테이너들은 최적의 적부계획(Stowage Planning)에 의해 체계적으로 이루어지고 있다. 그러나 단위 중량이 수십 톤에 이르는 철강 코일의 적부는 현재까지도 수작업으로 이루어지고 있어서 작업이 매우 비효율적이다. 그 결과로 작업들은 지연되고 안전사고들도 자주 발생되고 있다. 본 연구에서는 수작업에 의한 철강코일의 적부 과정에서 일어나는 판단착오, 체선, 안전사고 등을 방지하기 위하여 철강코일 적부 자동화 시뮬레이션 시스템을 설계하였다.

• 한국지진공학회논문집
• /
• 제27권2호
• /
• pp.83-90
• /
• 2023

The recent increase in earthquake activities has highlighted the importance of seismic performance evaluation for civil infrastructures. In particular, the container crane essential to maintaining the national logistics system with port operation requires an exact evaluation of its seismic response. Thus, this study aims to assess the seismic vulnerability of container cranes considering their seismic characteristics. The seismic response of the container crane should account for the structural members' yielding and buckling, as well as the crane wheel's uplifting derailment in operation. The crane's yielding and buckling limit states were defined using the stress of crane members based on the load and displacement curve obtained from nonlinear static analysis. The derailment limit state was based on the height of the rail, and nonlinear dynamic analysis was performed to obtain the seismic fragility curves considering defined limit states and seismic characteristics. The yield and derailment probabilities of the crane in the near-fault ground motion were approximately 1.5 to 4.7 and 2.8 to 6.8 times higher, respectively, than those in the far-fault ground motion.