• Progress in Superconductivity
• /
• 제1권2호
• /
• pp.89-94
• /
• 2000

A YBCO superconductor was prepared in a short time by a melt infiltration process that utilizes meting of $Ba_3Cu5O_8$ powder and the infiltration into a porous $Y_2BaCuO_5$ compact. The processing parameters such as a reaction temperature and time, and atmosphere (air and $O_2$) were controlled to establish the fabrication condition. The formation of a $YBa_2Cu_3O_x$, phase and the developed microstructure are reported.

• 한국결정성장학회지
• /
• 제13권5호
• /
• pp.211-216
• /
• 2003

The $Cu[SO_3(CH_2)_4SO_3$］ㆍ$4H_2O$ compound was synthesized. The three-dimensional structure of $Cu[SO_3(CH_2)_4SO_3$］ㆍ$4H_2O$ compound was determined. The copper atom is bridged by 4 oxygen atoms of 4 water molecules and 2 oxygen atoms of butanedisulfonate. The butyl chain in the plane of four copper atoms is oriented parallel and perpendicular to the one of plane axis, alternatively. Magnetic data indicate that this compound behaves a typical paramagnetic.

• 한국재료학회지
• /
• 제25권5호
• /
• pp.238-246
• /
• 2015

$H_2S$ is a flammable toxic gas that can be produced in plants, mines, and industries and is especially fatal to human body. In this study, CuO nanowire structure with high porosity was fabricated by deposition of copper on highly porous singlewall carbon nanotube (SWCNT) template followed by oxidation. The SWCNT template was formed on alumina substrates by the arc-discharge method. The oxidation temperatures for Cu nanowires were varied from 400 to $800^{\circ}C$. The morphology and sensing properties of the CuO nanowire sensor were characterized by FESEM, Raman spectroscopy, XPS, XRD, and currentvoltage examination. The $H_2S$ gas sensing properties were carried out at different operating temperatures using dry air as the carrier gas. The CuO nanowire structure oxidized at $800^{\circ}C$ showed the highest response at the lowest operating temperature of $150^{\circ}C$. The optimum operating temperature was shifted to higher temperature to $300^{\circ}C$ as the oxidation temperature was lowered. The results were discussed based on the mechanisms of the reaction with ionosorbed oxygen and the CuS formation reaction on the surface.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1110-1116
• /
• 2014

The cuprous oxide cubes with the special porous surface constructed by nano-prisms have been successfully fabricated by a solvothermal method. The template-free method is simple and facile without any surfactant. The X-ray powder diffraction (XRD) pattern suggests that the as-prepared product is the pure primitive cubic $Cu_2O$. The effects of the experimental parameters, such as the reaction temperature, reaction time and the concentration of sodium acetate anhydrous, on the morphologies of the products were investigated in detail by the scanning electron microscopy (SEM). Based on the time-dependent experiments, the possible formation mechanism was proposed. Using photocatalytic degrading reactive dyes as the model reaction and xenon lamp to simulate sunlight, the $Cu_2O$ cubes with the porous surface might possess higher photocatalytic activity than those of the commercial $Cu_2O$ powder in the visible-light region, indicating the excellent photocatalytic performance.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.1037-1043
• /
• 1994

The effects of annealing atmosphere and temperature on piezoelectricity (k33) and the mechanical strength of machined PZT was studied. Morphotropic Nb-doped PZT was sintered, machined to a rod and then annealed between 80$0^{\circ}C$ and 100$0^{\circ}C$ in air, PbZrO3, and CuO atmospheres respectively. In air or PbZrO3 atmosphere, the compressive strength of Nb-doped PZT increased by 12% with little change in k33 irrespective of annealing temperature. In CuO atmosphere, on the other hand, the compressive strength increased by 20% with little change in k33 at 80$0^{\circ}C$ but both turned to significant decrease above 90$0^{\circ}C$. The examination of the phase distribution and microstructure beneath the surface of CuO-treated PZT revealed that the changes in compressive strength and k33 are closely related to the reaction between PZT and vaporized CuO:liquid PbO precipitated in shallow surface region by the substitution of Cu to Pb sites enhances the decrease in microcracks and the surface roughness at 80$0^{\circ}C$ ; rapid evaporation of precipitated PbO expands a porous region of changed composition into the bulk above 90$0^{\circ}C$.

• 한국세라믹학회지
• /
• 제46권4호
• /
• pp.429-435
• /
• 2009

In this study, we investigated microstructure and the CO gas sensing properties of Ag-CuO-$SnO_2$ thin films prepared by co-evaporation and subsequently thermal oxidation at air atmosphere. The sensitivity of a Cu-Sn films, thermally oxidized at $600^{\circ}C$, is strongly affected by the amount of Cu. At Cu:7 wt%-Sn:93 wt%, the film exhibited a maximum sensitivity of ${\sim}2.3$ to CO gas of 1000 ppm at $300^{\circ}C$. In contrast, the sensitivity of a Sn-Ag film did not change significantly with the amount of Ag. An enhanced sensitivity of ${\sim}3.7$ was observed in the film with a composition of Ag:3 wt%-Cu:4 wt%-Sn:93 wt%, when thermally oxidized at $600^{\circ}C$. In addition, this thin film shows a response time of ${\sim}80$ sec and a recovery time of ${\sim}450$ sec to 1000 ppm CO gas. The results demonstrate that the CO sensitivity of the Ag-CuO-$SnO_2$ thin films may be closely associated with coexistence of $SnO_2$ and SnO phase, decrease in average particle size, and a porous microstructure. We also suggest that co-evaporation and followed by thermal oxidation is a very simple and effective method to prepare oxide gas sensor thin films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.225-228
• /
• 2000

Addition effects of metal oxide on the characteristics of infrared radiator of porous cordierite have been investigated. The porosity was increased with adding the graphite for 2MgO $.$ 2A1$_2$O$_3$$.$5SiO$_2$. The microstructure and the spectral emissivity were investigated as a function of metal oxide additives. The prosity and the emissivity were decreased with increasing amounts of CuO additives. The prosity and the emissivity were increased with increasing amounts of CoO, MnO$_2$ additives. The infrared radiator of cordierite system which spectral emissivity was 0.927 and 0.928 at from 5$\mu\textrm{m}$ to 20$\mu\textrm{m}$ wavelength as a 9wt% of CoO and MnO$_2$ additives.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.444-446
• /
• 1999

The structure and composition of anodic films, formed on 6063 commercial aluminium alloy at constant current density of $1.5A/^dm2$ with various superimposed cathodic current ratio, in the range 0~33%, in the 11% $H_2SO_4$ with various concentration of $CuSO_4{\cdot}5H_2O$, in the range 0~75 g/l, without cathodic current are generally porous-type and no sign of Cu co-deposition appearance, suggesting that cathodic current is an important factor in the Cu co-deposition. Comparison with the anodic film thickness measurement results obtained from anodic film formed by direct anodic current and anodic film formed by superimposed various portion of cathodic current, the portion of cathodic current of input current increases with decrease of anodic film thickness and increases with increase of concentration of $Cu_2S{\;}and{\;}Cu_2O$ in the anodic film.

• Carbon letters
• /
• 제27권
• /
• pp.98-107
• /
• 2018

Free-standing electrodes of CuO nanorods in carbon nanotubes (CNTs) are developed by synthesizing porous CuO nanorods throughout CNT webs. The electrochemical performance of the free-standing electrodes is evaluated for their use in flexible lithium ion batteries (LIBs). The electrodes comprising CuO@CNT nanocomposites (NCs) were characterized by charge-discharge testing, cyclic voltammetry, and impedance measurement. These structures are capable of accommodating a high number of lithium ions as well as increasing stability; thus, an increase of capacity in long-term cycling and a good rate capability is achieved. We demonstrate a simple process of fabricating free-standing electrodes of CuO@CNT NCs that can be utilized in flexible LIBs with high performance in terms of capacity and cycling stability.

• 전기화학회지
• /
• 제3권3호
• /
• pp.152-156
• /
• 2000

그물구조 다공성 금속을 황산과 황산구리 수용액을 전해질로 사용하여 전기화학적으로 제조하였으며, 이때 균질 전착에 영향을 미치는 구리이온 농도에 대해 살펴보았다. 전해질 중의 황산에 대한 구리이온의 농도비가 감소하면 전해질의 점성이 감소하여 전기전도도의 향상을 가지고 오며, 분극도(polarizability)의 상승을 유발시켜 균일 전류밀도 분포력(throwing power)을 향상시키는 효과를 나타내었다. 그물구조 다공성 금속을 제조하기 위한 최적의 조건은 한계 전류밀도와 균일 전류밀도 분포력을 고려하여 결정되어야 하며, 인가전류가 $10mA/cm^2$일 때 0.2M $CuSO_4\cdot\;5H_2O+0.5\;H_2SO_4$임을 확인하였다.