• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.368-373
• /
• 2015

Porous alumina ceramics with two different pore sizes were fabricated using hollow microspheres as the pore-forming agent. The relative density, total porosity, and microstructure of the obtained alumina ceramics were studied. It was found that the total porosity of sintered samples with different amounts of hollow microsphere content, from 2.0 to 4.0 wt%, was 69.3-75.6%. The interconnected and spherical cell morphology was obtained with 3.0 wt% hollow microsphere content. The resulting ceramics consist of a hierarchical structure with large-sized cells, and small-sized pores in the cell walls. Moreover, the compressive strength of the sintered samples varied from 8.3-11.5 MPa, corresponding to hollow microsphere contents of 2.0-4.0 wt%.

• 한국세라믹학회지
• /
• 제28권1호
• /
• pp.29-36
• /
• 1991

Microporous glasses in the system TiO2-SiO2-Al2O3-B2O3-CaO-Na2O were prepared by the phase-separation technique. Morphology and distribution of pore and specific surface area of glasses heated and leached out at various conditions were investigated by SEM and Porosimeter. Crystallization of glasses heated above transition temperature was also inspected by X-ray diffraction method. When the heating temperature and time increased, the pore size and volume increased, but the specific surface area decreased above the critical temperature. The phase-separation, specific surface area and pore size showed more sensitive change on the variation of heating temperature than of heating time. The specific surface area and micropore volume of porous glasses prepared in this study were about 120-330$m^2$/g and 0.001-0.01cc/g, respectively. Mean pore size of porous glasses were about 20-90$\AA$. Anatase phases was deposited when the parent glass was heat-treated at 75$0^{\circ}C$ for 6hrs.

• 대한화장품학회지
• /
• 제30권2호
• /
• pp.189-195
• /
• 2004

카본 블랙은 매우 낮은 밀도로 화장품에는 사용되지 않고 있지만 독성이 없고 안정한 물리적 특성과 검은색의 특성으로 이용 가치가 있다고 사료되는 바이다. 본 연구에서는 TEOS, a) PEO/ lecithin, b) PEO/polyethylene glycol, c) lecithin/polyethylene을 ethanol/water 수용액상에서 계면활성제를 탄화시켜 sol-gei반응에 의해 meso-porous silica샘플을 얻었고 N2 조건하 50$0^{\circ}C$에서 열처리된 organic-inorganic hybrid silica를 합성하였다. Pore안에 카본 블랙을 함유하는 meso-porous silica는 친수성, 소수성 용매에서 모두 좋은 분산성을 보여준다. 이 샘플은 BET에 의해 specific surface area (750$m^2$/g)과 pore size (4-6 nm)이고, XRD측정으로 pore structure (cylindrical type)를, 샘플의 SEM촬영으로 morphology(0.1-0.5$\mu\textrm{m}$ 입자 크기를 갖는 spherical powder)를 갖는다는 것을 알아냈다. 이렇게 합성한 카본-실리카 블랙 컬러를 마스카라에 적용하면 일반적으로 마스카라에 사용되던 블랙 컬러 사용시 보다 좀더 검은색을 보여주는 것은 물론이고 우수한 분산성도 갖는다. 무엇보다 이 파우더의 밀도 조절이 가능하여 마스카라 뿐 만 아니라 모든 화장품에의 사용이 가능하다.

• 멤브레인
• /
• 제24권1호
• /
• pp.50-62
• /
• 2014

상 전이 공정을 이용하여 polysulfone계 비대칭 정밀 여과막을 제조하였다. Polysulfone/N-methyl-2-pyrrolidone/polyvinylpyrrolidone/phosphoric acid계로 이루어진 casting 용액을 사용하였으며 응고조로는 물을 사용하였다. 멤브레인 제조공정에 적용된 상 전이 공정으로 증기 유도 상 전이 공정을 적용하였으며 상대습도 74%에서 캐스팅 판의 온도와 노출 시간을 조절한 결과 기공의 크기와 구조에 있어 변화를 관찰할 수 있었다. 제조된 멤브레인의 구조는 SEM과 microflow permporometer를 사용하여 조사하였다. Phosphoric acid의 첨가는 조밀한 스펀지 형태의 멤브레인을 느슨한 스펀지 형태의 멤브레인으로 변화시켰으며 촉매량의 Phosphoric acid 첨가로도 평균 기공크기는 거의 $0.2{\mu}m$ 정도 커지고 유량도 약 3,000 LMH가 증가하였다. 캐스팅 판의 온도와 노출 시간의 변화는 표면층의 구조, 기공의 크기 및 공극률에 큰 변화를 가져옴을 확인할 수 있었다.

• 펄프종이기술
• /
• 제45권1호
• /
• pp.35-41
• /
• 2013

In this study, we investigated the effect of the number of passes through agrinder on the pore characteristics of nanofibrillated cellulose (NFC) mat. The beaten pulp suspension was used to make NFC suspension using a grinder. To evaluate the pore characteristics of a NFC mat, the surface morphology of the dried NFC mat was observed with FE-SEM and the specific surface area was analyzed with BET nitrogen gas adsorption. The structure of NFC mat was changed with the different number of passes and drying methods. The specific surface area of NFC mat increased with the increase in the number of passes. The 20-passed NFC mat had 20 times larger specific surface area ($141m^2/g$) compared to the 0-passed NFC mat. The specific surface area was strongly correlated with the average pore size in NFC mat. The average pore diameter in NFC mat was calculated from the gas sorption isotherms using BJH model. The value was 13 - 15 nm, indicating that the NFC mat had mesoporous structure.

• Carbon letters
• /
• 제15권3호
• /
• pp.192-197
• /
• 2014

A hierarchical pore structured novolac-type phenol based-activated carbon with micropores and mesopores was fabricated. Physical activation using a sacrificial silicon dioxide ($SiO_2$) template and chemical activation using potassium hydroxide (KOH) were employed to prepare these materials. The morphology of the well-developed pore structure was characterized using field-emission scanning electron microscopy. The novolac-type phenol-based activated carbon retained hierarchical pores (micropores and mesopores); it exhibited high Brunauer-Emmett-Teller specific surface areas and hierarchical pore size distributions. The hierarchical pore novolac-type phenol-based activated carbon was used as an electrode in electric double-layer capacitors, and the specific capacitance and the retained capacitance ratio were measured. The specific capacitances and the retained capacitance ratio were enhanced, depending on the $SiO_2$ concentration in the material. This result is attributed to the hierarchical pore structure of the novolac-type phenol-based activated carbon.

• Advances in concrete construction
• /
• 제12권6호
• /
• pp.507-515
• /
• 2021

To evaluate the influence of slag on the alkalinity of pore solution and microstructure of concrete, this paper performs a leaching experiment on hardened cement-slag pastes (HCSP) slice specimens with different slag content in purified water. The pH value of pore solution, average porosity, morphology, phase composition and Ca/Si of HCSP specimens in the leaching process are measured by solid-liquid extraction, saturated-dried weighing, scanning electron microscopy-energy dispersive spectrometry (SEM-EDS) and X-ray diffraction (XRD). Results shows that the addition of slag can mitigate an increase in porosity and a decrease in Ca/Si of HCSP in the leaching process. Besides, an appropriate slag content can improve the microstructure so as to obtain the optimum leaching resistance of HCSP, which can guarantee the suitable alkalinity of pore solution to prevent a premature corrosion of reinforced bar. The optimum slag content is 40% in HCSP with a water-binder ratio of 0.45, and an excessive slag causes a significant decrease in the alkalinity of pore solution, resulting in a loss of protection on reinforced bar in HCSP.

• 한국재료학회지
• /
• 제20권5호
• /
• pp.252-256
• /
• 2010

The study was done to change the morphology and pore size of SBA-15 silica, and the characteristics of SBA-15 silica were investigated with TG-DSC, XRD, SEM, TEM and N2 adsorption-desorption under changing aging conditions. SBA-15 silica having a 2D-hexagonal structure was synthesized and confirmed by SEM and TEM. The structure of mesoporus silica SBA-15 showed a pore having regularly formed hexagonal structure and a passage having a cylindrical shape. This result is in good agreement with the pore forming in XRD and cylindrical shape of the structure in $N_2$ adsorption-desorption isotherm. SBA-15 silica showed a large BET surface area of $603-698\;m^2/g$, a pore volume of $0.673-0.926\;cm^3/g$, a large pore diameter of 5.62-7.42 nm, and a thick pore wall of 3.31-4.37 nm. This result shows that as the aging temperature increases, the BET surface area, pore volume, and pore diameter increase but the pore wall thickness decreases. The BET surface areas in SM-2 and SM-3 are as large as $698\;m^2/g$. However, SM-2 has a large surface area and forms a thick pore wall, when the aging temperature is $100^{\circ}C$ and is synthesized into stable mesoporous SBA-15 silica.

• Corrosion Science and Technology
• /
• 제8권4호
• /
• pp.143-147
• /
• 2009

In biomedical implants and dental fields, titanium has been widely utilized for excellent corrosion resistance and biocompatibility. However, Ti and its alloys are nonbioactive after being implanted in bone. In this study, for the purpose of improvement in biocompatibility the anodic $TiO_2$ layer on Ti-xNb alloys were fabricated by electrochemical method in phosphate solution, and the effect of Nb content on the pore size, the morphology and crystallinity of Ti oxide layer formed by the anodic oxidation method was investigated. The Ti containing Nb up to 3 wt%, 20 wt% and 40 wt% were melted by using a vacuum furnace. The sample were cut, polished, and homogenized for 24 hr at $1050^{\circ}C$ for surface roughness test and anodizing. Titanium anodic layer was formed on the specimen surface in an electrolytic solution of 1 M phosphoric acid at constant current densities ($30mA/cm^2$) by anodizing method. Microstructural morphology, crystallinity, composition, and surface roughness of oxide layer were observed by FE-SEM, XRD, EDS, and roughness tester, respectively. The structure of alloy was changed from $\alpha$-phase to $\beta$-phase with increase of Nb content. From XRD results, the structure of $TiO_2$ formed on the Ti-xNb surface was anatase, and no peaks of $Nb_2O_5$ or other Nb oxide were detected suggesting that Nb atoms are dispersed in $TiO_2$-based solid solution. Surface roughness test and SEM results, pore size formed on surface and surface roughness decreased as Nb content increased. From the line analysis results, intensity of Ti peak was high in the center of pore, whereas, intensity of O peak was high in the outside of pore center.

• 멤브레인
• /
• 제24권6호
• /
• pp.472-483
• /
• 2014

본 연구는 거대고리 금속 이온 착화합물과 유도체를 이용하여 미세 다공성 구조를 가지는 분리막의 제조에 관한 것이다. 고분자와 금속이온 리간드 착물 시스템을 이용함으로써 기존의 방법들에 비해 상 전이 과정을 보다 정교하게 제어할 수 있었다. 금속염, cyclohexanedione dioxime, hydroxyphenylboronic acid와의 축합 반응을 통하여 금속 clathrochelate 착물을 얻을 수 있었다. PES, PVP, BE와 금속 clathrochelate 착물을 DMF에 녹인 후 비용매 유도 상 전이법을 통하여 유무기 혼성고분자막을 제조하였다. 제조된 분리막의 구조는 FE-SEM과 microflow permporometer로 조사하였다. p-Hydroxyphenyl group을 가지는 Fe(II) clathrochelate 착물의 첨가는 분리막의 구조에 있어 기공 크기 분산도를 좁혀주고, 표면의 기공 밀도를 높여 주었으며 최대 기공 크기를 감소시킴을 볼 수 있었다.