• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.1-11
• /
• 2012

PURPOSES : The purpose of the study was to examine dynamic features of concrete after mixing a little macro fiber with small aspect ratio and long length utilized for bridge, tunnel and shotcrete for tensile performance and crack control in domestic/overseas countries with cement concrete pavement mix. METHODS : Coarse aggregates with small aspect ratio and macro fibers with maximum length of approximately 32 mm are introduced in small quantities in the mix proportions of concrete pavement so as to prevent loss of the workability. Then, this study intends to evaluate the applicability of macro fibers in the mix proportions of concrete pavement by examining the basic construction performance, as well as the change of toughness, the equivalent bending strength and the flexural toughness index caused by compression, bending, tension and the flexural stress-displacement curve. RESULTS : As the results, in each kind of macro fiber, polyvinyl alcohol fiber and steel fiber displayed a good performance. CONCLUSIONS : In 0.2 and 0.3% of fiber contents, it is appeared that polyvinyl alcohol fiber has a large effect on improvement of tensile performance and steel fiber on improvement of deforming performance of bending stress.

• 한국염색가공학회지
• /
• 제19권5호
• /
• pp.17-23
• /
• 2007

As polyvinyl alcohol(PVA) filament yarn is commercially used in many fields due to its high strength and modulus properties. This research was carried out to study the dyeing behavior of PVA and to find out appropriate dye for better dyeing. As the dyeing behavior of PVA fiber is similar to cellulose due to the same functional group, reactive and vat dyes were selected for the dyeing. Color strength of PVA fibers treated with vat dyes was found to be better than those with reactive dyes, because of the low fixation of reactive dye on fibers. Most of the reactive dye may became hydrolyzed, and flushed away with water in washing. Colorfastness to laundering was shown to be very high for both of the reactive-dyed and vat-dyed PVA fibers.

• Computers and Concrete
• /
• 제31권3호
• /
• pp.197-206
• /
• 2023

In this paper, the bending performance of a MSFRHPC (containing steel fiber, polyvinyl alcohol (PVA) fiber, and CW)-reinforced beam was studied for the first time. Introducing a multiscale fiber system increased the first crack load (up to 150%), yield load (up to 50%), and peak load (up to 15%) of reinforced beams. The multiscale fiber system delays cracking of the reinforced beam, reduces crack width of the reinforced beam in normal use, and improves the durability of the beam. Considering yield load and peak load, the reinforcing effect of multiscale fiber on the high-reinforcement ratio beam (1.00%) is better than that on the low-reinforcement ratio beam (0.57%). Introducing fibers slowed the development of cracks in the reinforced beam under bending. With the added hybrid fiber, the deformation concentration of reinforced beams after yield was more significant with concentration in 1 or 2 cracks. A model for predicting the flexural capacity of MSFRHPC-reinforced beams was proposed, considering the action of multiscale hybrid fibers. This research is helpful for structure application of MSFRHPC-containing CW.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.101-107
• /
• 2008

This study investigated fundamental characters of the concrete according to various fiber types and contents and their properties of spatting resistance and residual compressive strength after fire test corresponding to ISO and RABT heating corves. The results were summarized as following. The Flowability was gradually declined as the increase of fiber contents, and it was the most favorable with nylon(NY) fibers. The decrease of air contents due to increasing fiber contents was in order by polypropylene(PP), polyvinyl alcohol(PVA) and NY fibers. The compressive strengths were over 40 MPa at 7 days and 50 MPa at 28 days. It was in order by PVA, PP and NY fibers. For the spatting properties, all specimens were prevented at ISO heating curve. In the other hand, the partial spatting at the surface occurred on the plain without fibers, but it was prevented over 0.10 % of PVA and 0.05 % of PP and NY fibers at the RABT heating curve.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.215-218
• /
• 2002

Poly(vinyl alcohol)(PVA)는 1924년 W. O. Herrmann과 W. Haehnel이 Poly(vinyl esters)를 caustic soda 용액에서 비누화하여 합성한 뒤 많은 연구 및 사용되어지고 있는 고분자이다. 환경친화적이고, 인체에 무해하여 인공관절, 콘택트 렌즈 등에 이용이 되고 있다. 특히 구조가 선형적이고 zig-zag구조를 가지기 때문에 고강도, 고탄성을 갖는 섬유의 제조가 가능한 소재이다[1]. PVA섬유의 제조는 용매를 이용한 습식방사 및 겔방사로 섬유를 제조한다. (중략)

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.71-77
• /
• 2012

Cellulose nanowhisker (CNW) isolated from hardwood bleached kraft pulp (HW-BKP) using sulfuric acid hydrolysis was suspended in polyvinyl alcohol (PVA) and electrospun into composites nanofibers. Transmission electron microscopy (TEM) revealed the CNW to be rod-like, approximately of $16.1{\pm}4.6$ nm wide and $194{\pm}61$ nm long, providing an aspect ratio of about 12, with a particle size distribution range of $662.2{\pm}301.2$ nm. Uniform and high quality CNW/PVA composite nanofibers were successfully manufactured by the electrospinning method. As the CNW loading increases, the viscosity of CNW/PVA solutions shows a minimum at 1% CNW level which subsequently results in the smallest diameter (193 nm) of electrospun nanofibers. The average diameter of the nanofibers increased up to 284 nm with increasing CNW loading. These results suggest that the electrospinning method provides a great potential of manufacturing consistent and reliable nanofibers from CNW/PVA solution for the formation of scaffolds with potentials in future application.

• 비파괴검사학회지
• /
• 제27권2호
• /
• pp.148-156
• /
• 2007

섬유복합재료의 역학적인 관점에서 볼 때 PVA-ECC (polyvinyl alcohol-engineered cementitious composite)의 섬유분산성 평가는 매우 중요한 요소이다. 그러나 PVA 섬유의 낮은 명암비 때문에 시멘트계 재료와 섬유를 구별하기가 어려우므로, PVA-ECC의 섬유분산성 평가를 하기에는 어려운 점이 있다. 이 연구에서는 이러한 문제점을 해결하기 위하여 PVA-ECC 내의 섬유분산성을 평가할 수 있는 새로운 방법을 제시하였다. 형광의 원리를 이용하여 섬유복합재료 단면에서 PVA 섬유가 초록빛을 발하는 이미지를 얻었고, PVA-ECC 시편에 대한 섬유분산성은 형광 현미경에 부착된 CCD (charge coupled device) 카메라를 통하여 얻어진 이미지를 이미지 프로세싱 기법과 통계적인 방법을 이용하여 평가하였다. 또한 형상분석을 통하여 섬유의 방향성이 분산성에 미치는 영향을 파악하였으며, 판별함수기법과 분수령 알고리즘을 이용하여 섬유 검출 성능을 향상시킬 수 있는 기법을 제시하였다.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.438-444
• /
• 2019

본 연구에서는 모르타르의 동결융해피해에 미치는 폴리프로필렌섬유의 영향을 실험적으로 검토하였다. 섬유를 혼입하지 않은 섬유무보강 모르타르와 폴리비닐알코올섬유를 혼입한 모르타르를 비교 대상으로 하여 폴리프로필렌섬유의 혼입이 300사이클의 동결융해시험 후 모르타르의 압축 및 휨특성에 미치는 영향을 평가하였다. 또한, 300사이클의 동결융해 시험 후 모르타르의 질량감소율, 상대동탄성계수 및 공극크기분포에 대한 시험을 실시하였다. 그 결과, 섬유종류에 관계없이 섬유무혼입 모르타르에 비해 섬유혼입 모르타르는 300사이클의 동결융해시험 후 압축강도 및 휨강도의 역학적 성능저하와 질량감소율의 증가를 억제하는 것이 가능했다. 한편, 300사이클의 동결융해시험 후 모르타르의 공극감소에 대한 저항에 폴리비닐알코올섬유뿐만 아니라 폴리프로필렌섬유가 효과적으로 작용할 수 있는 것을 확인했으나 폴리프로필렌섬유를 혼입한 모르타르의 동결융해저항성을 향상시키기 위해서는 폴리비닐알코올섬유에서 기대할 수 있는 시멘트매트릭스와의 결합효율을 증가시킬 필요가 있다.

• 한국농공학회논문집
• /
• 제54권5호
• /
• pp.9-16
• /
• 2012

In this study, the effect of metakaoline and silica fume on the bond performances of structural polyvinyl alcohol (PVA) fiber in cement mortar, including bond strength, interface toughness, and microstructure analysis are presented. Metakaoline and silica fume contents ranging from 0 % to 15 % are used in the mix proportions. Pullout tests are conducted to measure the bond performance of PVA fiber from cement mortar. Test results showed the incorporation of metakaoline and silica fume can effectively enhance the PVA fiber-cement mortar interfacial properties. Bond strength and interface toughness increased with metakaoline and silica fume content up to 10 % in cement mortar and decreased when the metakaoline and silica fume content reached 15 %. The microstructural observation confirms the findings on the interface bond mechanism drawn from the fiber pullout test results.

• 콘크리트학회논문집
• /
• 제24권2호
• /
• pp.121-127
• /
• 2012

지금까지 연구된 고인성 섬유 복합체의 주요 결합재는 시멘트이다. 이 연구의 목적은 시멘트를 전혀 사용하지 않은 고로슬래그 기반 알칼리 활성 모르타르와 PVA(polyvinyl alcohol) 섬유를 이용하여 고인성을 나타내는 복합체에 대한 가능성을 검토하는 것이다. 이를 위하여 알칼리 활성화제 종류에 따라 균일한 섬유 분산성을 확보하면서 섬유 혼합을 용이하게 하기 위한 적절한 모르타르의 유동성 및 점성을 갖는 두 가지 배합을 결정하였고, 복합체의 기본적인 성능을 평가하기 위하여 슬럼프 플로, 압축강도, 일축인장, 휨 실험을 수행하였다. 실험 결과 두 가지 배합의 슬럼프 플로는 평균 465 mm로 나타났고, 약 2% 정도의 인장 변형 성능과 다중 미세균열을 나타내는 것을 확인하였다. 이를 통하여 시멘트를 전혀 사용하지 않고도 변형률 경화 거동에 의한 고인성을 나타내는 섬유 복합체의 개발 가능성을 입증하였다.