DOI QR코드

DOI QR Code

Bond Properties of Structural Poly Vinyl Alcohol Fiber in Cement Based Composites with Metakaolin and Silica Fume Contents

메타카올린 및 실리카퓸 첨가율에 따른 구조용 PVA 섬유와 시멘트 복합재료의 부착특성

  • 이정우 (공주대학교 대학원 농공학과) ;
  • 박찬기 (공주대학교 지역건설공학과)
  • Received : 2012.02.23
  • Accepted : 2012.05.25
  • Published : 2012.09.30

Abstract

In this study, the effect of metakaoline and silica fume on the bond performances of structural polyvinyl alcohol (PVA) fiber in cement mortar, including bond strength, interface toughness, and microstructure analysis are presented. Metakaoline and silica fume contents ranging from 0 % to 15 % are used in the mix proportions. Pullout tests are conducted to measure the bond performance of PVA fiber from cement mortar. Test results showed the incorporation of metakaoline and silica fume can effectively enhance the PVA fiber-cement mortar interfacial properties. Bond strength and interface toughness increased with metakaoline and silica fume content up to 10 % in cement mortar and decreased when the metakaoline and silica fume content reached 15 %. The microstructural observation confirms the findings on the interface bond mechanism drawn from the fiber pullout test results.

Keywords

References

  1. Chan, Y. W., and S. H. Chu, 2004. Effect of silica fume on steel fiber bond characteristics in reactive powder concrete, Cement and Concrete Research 34(7): 1167-1172. https://doi.org/10.1016/j.cemconres.2003.12.023
  2. Kim, J. H., C. G. Park, S. W. Lee, S. W. Lee, and J. P. Won, 2008. Effects of the geometry recycled PET fiber reinforcement on shrinkage of cement-based composites, Composites Part B: Engineering 39(3): 442-450. https://doi.org/10.1016/j.compositesb.2007.05.001
  3. Kuraray PVA Fiber Division, Kuraray structural fibers for concrete reinforcement, http://www.kuraray-am.com. Accessed 29 April. 2012.
  4. Lee, J. H., and C. G. Park, 2011a. Effect of Polyvinyl Alcohol Fiber Volume Fraction on Pullout Behavior of Structural Synthetic Fiber in Hybrid Fiber Reinforced Cement Composites, Journal of Korea Concrete Institute 23(4): 461-469 (In korean). https://doi.org/10.4334/JKCI.2011.23.4.461
  5. Lee, J. H., and C. G. Park, 2011b. Effect of Mineral Admixture on Bond Properties between Polyolefin Based Synthetic Fiber and Cement Mortar, Journal of Korea Concrete Institute 23(3): 339-346 (In korean). https://doi.org/10.4334/JKCI.2011.23.3.339
  6. Li, V. C., and H. Stang, 1997. Interface property characterization and strengthening mechanisms in fiber reinforced cement based composites, Advanced Cement Based Materials 6(1): 1-20. https://doi.org/10.1016/S1065-7355(97)90001-8
  7. Mobasher, B. and C. Y. Li, 1996. Effect of interfacial properties on the crack propagation in cementitious composites, Advanced Cement Based Materials 4(3/4): 93-105. https://doi.org/10.1016/S1065-7355(96)90078-4
  8. Naaman A. E., and H., Najm, 1991. Bond-slip mechanism of steel fibres in concrete, ACI Materials Journal 88(2): 135-145.
  9. Park, S. B., J. S. Kim, and Y. Y. Kim, 2008. Rheology Control of Cement Paste for Applying ECC Produced with Slag Particles to Self-Consolidating and Shotcreting Process, Journal of the Korea Concrete Institute 20(1): 67-75 (In korean). https://doi.org/10.4334/JKCI.2008.20.1.067
  10. Park, C. B., H. S. Kim, J. Y. Jeon, E. K. Kim, and D. H. Ryu, 2008. Properties of Ternary or Quaternary High Strength Concrete Using Silica Fume & Meta Kaolin, Journal of the Korea Concrete Institute 20(3): 307-315 (In korean) https://doi.org/10.4334/JKCI.2008.20.3.307
  11. Shannag, M. J., R. Brinker, and W. Hansen, 1997, Pullout behavior of steel fibers from cement-based composites, Cement and Concrete Research 27(6): 925-936. https://doi.org/10.1016/S0008-8846(97)00061-6
  12. Sehaj Singha, Arun Shuklaa, and Richard Brown, 2004. Pullout behavior of polypropylene fibers from cementitious matrix, Cement and Concrete Research 34(10): 1919-1925. https://doi.org/10.1016/j.cemconres.2004.02.014
  13. Won, J. P., D. H. Lim, C. G. Park, and H. G. Park, 2006. Bond behavior and flexural performance of structural synthetic fibre reinforced concrete, Magazine of concrete research 28(6): 401-410.
  14. Won, J. P., C. G. Park, Y. J. Kim, and K. H. Park, 2007. Interfacial Pullout Characteristics of Recycled PET Fiber With Hydrophilic Chemical Treatments in Cement Based Composites, Journal of the Korea Concrete Institute 19(3): 333-339 (In korean). https://doi.org/10.4334/JKCI.2007.19.3.333
  15. Wu, H. C., and V. C. Li, 1999. Fiber cement interface tailoring with plasma treatment, Cement and Concrete Composites 21(3): 205-212. https://doi.org/10.1016/S0958-9465(98)00053-5

Cited by

  1. Pullout Performance of Reinforcing Fiber Embedded in Nano Materials Cement Mortar with Nano Clay Contents vol.55, pp.3, 2013, https://doi.org/10.5389/KSAE.2013.55.3.113
  2. Mechanical Properties and Impact Resistance of Hybrid Fiber Reinforced Concrete with Type of Reinforcing Fibers for Precast Concrete vol.55, pp.4, 2013, https://doi.org/10.5389/KSAE.2013.55.4.029