• 한국염색가공학회지
• /
• 제27권2호
• /
• pp.126-131
• /
• 2015

Silica-polyurethane hybrid breathable films were prepared and their breathabilities were assessed. Appropriately aggregated silica was prepared through sol-gel reaction of water glass and its particle size ranged 360~500nm. The polyurethane dispersion was prepared by the reaction of isophorone diisocyanate(IPDI) as diisocyanate and polytetramethylene glycol(PTMG) and dimethylol propionic acid(DMPA) as polyol, particle size ranging 30~120nm. The reaction between isocyanate and hydroxyl group to form urethane bonding was checked by the intensity of the stretch peak of isocyanate at $2270cm^{-1}$ in the FT-IR. The silica was incorporated into polyurethane dispersion and casted into film. It was shown that the incorporated silica(1~5wt.%) increased water vapour permeability of the films by 30~100%, and decreased the hydrostatic pressure by 10~40%. From the results, it could be concluded that the appropriate hybridization of silica can increase the breathability of polyurethane dispersion film, while minimizing the loss of hydrostatic pressure.

• Journal of Pharmaceutical Investigation
• /
• 제21권3호
• /
• pp.143-147
• /
• 1991

${\alpha}-amylase$ was immobilized on the surface of polyethylene glycol(M.W. 2000) grafted polyurethane film using diisocyanate in an attemp to develop enzyme immobilized polymeric materials. The surface morphology of the modified polyurethane film was examined by SEM. Effects of pH and temperature on the activity of the immobilized ${\alpha}-amylase$ were investigated. The optimal pH range of the activity was $7.0{\sim}7.5.$ The immobilized ${\alpha}-amylase$ demonstrated high thermal stability and maintained consistent activity during long-term storage.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.362-372
• /
• 2010

This paper surveys the physical properties of the multiwall carbon nanotube (MWNT) and polyurethane composite film for improvement of mechanical properties and electrical characteristics. The modification of MWNT was carried out by acid treatment with nitric and sulphuric acid mixed solution, and then followed by thermal treatment for enhancing MWNT dispersion with polyurethane. This modified MWNT was mixed with polyurethane by changing the loading content of MWNT and dispersion time under the dimethylformamide solution in the ultrasonic wave apparatus. Various physical characteristics of the modified PU/MWNT films were measured and analyzed in terms of the loading content and dispersion time. The maximum absorbance of the PU/MWNT films were observed with the 2wt% loading at dispersion times of 2 and 24 hour, respectively. The minimum electrical volume resistivity of PU/MWNT film was shown at the loading content of 0.5wt% or more irrespective of dispersion treating time. However the optimum condition was assumed to 2wt% loading at dispersion time of 2 hours by assessing the surface profile of the film using video microscope. The breaking stress and strain of the PU/MWNT film decreased with increasing loading content, but no change of physical properties was shown with increasing in dispersion time.

• 한국잠사곤충학회지
• /
• 제40권2호
• /
• pp.143-149
• /
• 1998

For the application of silk sericin, silk sericin powders were prepared by various spray dry conditions and the characteristics of silk sericin/polyurethane mixed films were investigated. When the sericin was dried from the solution at higher inlet and outlet temperature, larger sizes of the powder particles were obtained. It was also found that inlet and outlet temperatures were important factors affecting the shape and surface characteristics of sericin power particle. The many holes and empty spaces were observed at the surface and cross section of sericin/PU mixed film. With the increase of the amount of sericin powder in the mixed films, the size and number of holes and empty spaces were increased. The thickness of sericin/PU mixed film was increased with the content of sericin powder. As the portion of sericin powder increase, the tenacity is decreased while the elongation slightly increased.

• Journal of Pharmaceutical Investigation
• /
• 제33권3호
• /
• pp.163-169
• /
• 2003

In order to develop a film-forming transdermal drug delivery system, polyurethane (PU) based on poly(ethylene glycol) and poly(tetramethylene oxide) was synthesized and characterized. The synthesized PU was blended with Gantrez ES 225 (GT) to improve the adhesion property of film-forming agent to the skin. When film-forming gel formulation containing 3% ketoprofen (KP) was applied, transparent thin film was obtained within 5 minutes and adhered to the skin for 8 hours. In vitro percutaneous absortion studies were performed to determine the rate of ketoprofen absorption through guinea pig skin. A prominent effect of limonene on the skin permeability of ketoprofen was observed among the various skin permeation enhancers investigated. Considering mechanica properties of film and skin permeability of ketoprofen, 2% of limonene was optimal content in the film forming transdermal formulation.

• 폴리머
• /
• 제38권3호
• /
• pp.265-271
• /
• 2014

In order to investigate the characteristics of the gradient fluorinated polyacrylate and polyurethane latex blend films, the fluorinated polyacrylate emulsion and the polyurethane emulsion were synthesized, and then the both emulsions were blended at a series of ratios. The effects of content of the fluorinated polyacrylate on the gradient structure and surface property of the blended films were assessed by AFM, XPS, SEM-EDX and surface free energy measurements. It appeared that, while the content of the fluorinated polyacrylate latex was up to 30%, the fluorinated polyacrylate particles were selectively gathered on the film-air (F-A) and film-glass (F-G) interfaces at room temperature. When the content of the fluorinated polyacrylate was under 30%, the gradient structure of fluorinated component was not evident. The further increasing of fluorinated polyacrylate in the mixed system facilitated the formation and enlargement of gradient structure, but the adhesion of film decreased a little.

• Elastomers and Composites
• /
• 제34권5호
• /
• pp.399-406
• /
• 1999

Polytetramethylene ether glycol (PTMG)와 4,4'-diphenylmethane diisocyanate (MDI), toluene 2,4-diisocyanate(TDI), isophoron diisocyanate(IPDI)로 polyurethane (PU) prepolymer를 합성하고, dimethylol propionic acid(DMPA)로 쇄연장시킨 후 triethyl amine(TEA)으로 중화시켜서 안정한 수분산성의 음이온성 폴리우레탄을 제조하였다. 음이온성 폴리우레탄의 합성과정에서 쇄연장제의 함량과 중화비에 따른 에멀젼의 유화안정성, 접착강도, 점도, 유리전이온도 및 cast film의 물리적 성질을 UTM, Viscometer와 DSC를 사용하여 검토하였다.

• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.90-97
• /
• 2018

Hydrophilic reactive hot-melt polyurethane adhesive(HRHA) using a hydrophilic polyol having different molecular weight and NCO index was synthesized. This HRHA was synthesized using Polyethylene glycol(PEG) as a hydrophilic polyol, Polypropylene glycol(PPG) and Polycaprolactone diol(PCL) as hydrophobic polyols, and Methylene diphenyl diisocyanate(MDI) as an isocyanate. The changes in IR spectrum, viscosity and thermal properties of HRHA with different PEG molecular weights and NCO index were investigated, and the tensile strength and elongation of the HRHA casting film and the peel strength, moisture permeability and water pressure of the HRHA coated fabric were confirmed. In this experiment, as the molecular weight of PEG and NCO index increased, the adhesive strength, tensile strength, elongation and moisture permeability was increased but viscosity and Tg was decreased.

• 한국염색가공학회지
• /
• 제20권5호
• /
• pp.35-40
• /
• 2008

Dyeing and washing fastness properties of polyurethane-impregnated polyester (PU-impregnated PET), and the distribution of two disperse dyes between PET and PU film were studied to investigate the effect of PU portion to exhaustion and washing fastness. Dyeing properties of PU-impregnated PET were quite different with those of PET: PU-impregnated PET absorbed disperse dye linearly from the early stage of dyeing to equilibrium, and it exhibited excellent build-up property up to 4 %owf dyeing. The absorbed dye on PU film at early dyeing stage migrated to more substantive PET at the temperature higher than $115^{\circ}C$. The amount of exhausted dye on PET portion was larger than on PU film and the distribution ratio was $2.08{\sim}2.34$. The grade of washing fastness of PU-impregnated PET was the same as or lower by $0.5{\sim}1$ grade than PU film whose washing fastness was lower by $0.5{\sim}1$ than PET.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.30-36
• /
• 2013

Swelling and subsequent deformation of membranes by water wetting are regarded as a prime drawback of hydrophilic polyurethane breathable film. Fluoroalkylated surface was prepared by reacting the film with hexamethylene diisocyanate(HDI) and 2-perfluorohexyl ethanol. IR spectra and XPS results showed that the fluoroalkyl group was successfully introduced to the film surface with hexamethylene linkage. Water contact angle was increased from $68.7^{\circ}$ up to $144.2^{\circ}$ with the degree of fluoroalkylation. Decrease in water-vapor permeability was minimized even for the film of highest fluoroalkylation.