• 제목/요약/키워드: polyphase

검색결과 125건 처리시간 0.022초

가변 대역분할 웨이블릿필터를 이용한 오디오 부호화기 (Audio Coder Using Variable Subband Wavelet Filter)

  • 김준성;강현철;변윤식
    • 한국음향학회지
    • /
    • 제17권5호
    • /
    • pp.57-62
    • /
    • 1998
  • 본 논문에서는 입력신호의 시변특성에 따라 분석 필터의 대역을 가변 시키는 필터 뱅크의 구조를 제안한다. 제안된 필터뱅크는 일반적으로 32개의 균일한 대역으로 나누어 임 계대역의 표현을 적절히 표현하지 못하는 Polyphase 필터의 단점을 극복하면서 시스템 설 계에 높은 계산량을 요구하는 QMF-tree 필터의 단점을 보완한다. 본 연구에서는 분할 대역 은 4개에서 26개의 대역으로 가변하고, 웨이블릿 필터중 Daubechies필터를 사용하였다. 제 안된 구조의 부호화기는 128kbps에서 MPEG-a오디오와 비슷한 수준의 CD 음질을 유지하 며, 연산량 비교결과는 PolyPhase filter를 이용한 MPEG보다 부호화, 복호화 과정을 합쳐 다양한 전송률과 음원에서 평균 19%의 감소를 얻었다.

  • PDF

Time Dependent Correlation Function과 그의 응용에 관한 연구 (Some Study on Time Dependent Correlation Function and Its Applications)

  • 안수길
    • 대한전자공학회논문지
    • /
    • 제10권6호
    • /
    • pp.25-44
    • /
    • 1973
  • 원인과 결과간의 위상과 work사이의 관계를 correlation function의 견지에서 검토하였고 continuous signal에 포함되어 있는 redundancy를 지적하여 sampling취급의 근거를 auto correlation면에서 보였다. 두 신호사이의 Correlation의 시간변동을 보여줄 수 있는 Time Dependent Correlation Function을 정의하여 PLL회로에서 그 유편성을 보였다. 끝으로 다상포낙선검파법에 의한 특성의 개선을 T.D.Correlation Furction에 의한 Correlation Analysis를 통하려 입증하였다.

  • PDF

단층변위를 이용한 단층의 총 이동량 계산법 (A New Method Calculating Total Slip of Fault with Fault Separation)

  • 황재하
    • 자원환경지질
    • /
    • 제31권6호
    • /
    • pp.547-555
    • /
    • 1998
  • A new trigonometrical method for calculating total slip (T) of faulting is presented. The parameters for the calculations are used rake of fault striation, strike and dip of fault and of index planar structure such as bedding plane. The faults are groupped into three types. The direction of plunging of fault striation is out of a range ${\pm}90^{\circ}$ to the bedding dip direction in $360^{\circ}$ system, which is groupped into the type I. Meanwhile, the case of the direction lies in the above range can be separated into two different types, type II and type III, according to relative largeness of the angles rake of fault striation and i (see text). The type II has smaller rake than angle i and the type III has larger rake than angle i. Here I propose a few equations for calculating not only total slip (T) but strike slip (L) or dip slip (S) of the faulting. The equations are adapted selectively to the types of fault mentioned before. The limitation of the method is that the equations do not fit to polyphase faulting.

  • PDF

재표본화에서 다단계 구현의 계산 효율성 (Computational Efficiency of Resamplers in Multi-Stage Structure)

  • 김인철
    • 방송공학회논문지
    • /
    • 제11권1호
    • /
    • pp.138-141
    • /
    • 2006
  • 본 논문에서는 다단계 구조의 유리수배 표본화율 변환기의 계산 효율성을 메모리 사용량과 초당 곱셈 수 측면에서 정량적으로 평가한다. 그리고 다단계 구조에서 해상도 보존 조건과 서로소 조건을 설명하고, 각 단계의 최적 변환 비율을 유리수배로 직접 얻을 수 있는 설계 과정을 제시한다. 실제 예로, 44.1KHz 에서 48KHz 로의 표본화율 변환기를 2단계 구조로 구현한 예를 보인다.

적응 웨이블릿 패킷을 이용한 오디오 부호화기와 심리음향 모델링 (Audio Coder Using an Adaptive Wavelet packet Decomposition and Psychoacoustic)

  • 김준성
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 1998년도 학술발표대회 논문집 제17권 1호
    • /
    • pp.245-248
    • /
    • 1998
  • In this paper, a new variable wavelet packet decomposition audio coder, based on the time varying characteristic of the audio signals, is proposed and presents a technique to incorporate psychoacoustic models into an adaptive wave let packet scheme. The proposed filterbank improves the defect of the polyphase filterbank that could not properly represent the critical band and the defect of QMF-tree filter that need high complexity to implement. The filterbank consists of varying number of subband from 4 to 26 bands and use Daubechies 6-order wave let. The codec yields excellent quality at total bit rates of about 128kbps for monophonic CD-quality signals with an sampling frequency of 44.1kHz and reduces complexity by 19% for various bit-rates and sources with encoding and decoding process.

  • PDF

5상 5KW 표면부착형 영구자석 동기발전기(SPMSG) 개발 (A Development of Surface Permanent Mount Synchronous Generator for 5 Phase 5KW)

  • 정형우;김민회;김동희
    • 조명전기설비학회논문지
    • /
    • 제26권11호
    • /
    • pp.87-96
    • /
    • 2012
  • This paper propose a development of surface permanent mount synchronous generator(SPMSG) for 5-phase 5Kw in order to study a polyphase ac machinery that keep hold of advantages more than traditional three-phase squirrel-cage induction motor, such as reducing a amplitude of torque pulsation decreasing electric noises, and increasing the reliability. Design methods of the generator use a development tools with Maxwell 2D and Simplorer. There are designed drawing of manufactured frames of the SPMSG. A amplitude and waveform of the generated electromotive force, FFT analysis of harmonics within output voltages, and reviewing a experiment results are shown by variable output frequency. We are presenting a design and manufacture methods for the SPMSG.

5상 5kW 표면부착형 영구자석 동기발전기 운전특성 (An Operating Characteristics of Surface Permanent Magnetic Synchronous Generator for 5-Phase 5kW)

  • 정형우;김민회;송현직;김동희
    • 조명전기설비학회논문지
    • /
    • 제27권6호
    • /
    • pp.9-16
    • /
    • 2013
  • This paper presents an operating characteristics of the 5-phase 5kW with developed the surface permanent magnetic synchronous generato (SPMSG) in order to make a study of a polyphase ac motors keeping hold of more advantages. There are shown a amplitude and waveform of the generated electromotive force, in FFT analysis of harmonics, within output voltages, and reviewing a experiment results in no-load test, resistive load, and inductive load using 5-phase induction motor by variable output frequency. The operating characteristics of the developed manufacturing generator include voltage regulation, efficiency, power factor, THD, and so on at rated load.

과전류 부하에서 5상 농형 유도전동기의 정수 특성 (Parameters Estimation Characteristics of Five-Phase Squirrel-Cage Induction Motor within Over Current Load)

  • 김민회
    • 조명전기설비학회논문지
    • /
    • 제29권7호
    • /
    • pp.38-46
    • /
    • 2015
  • This paper propose a variable parameter estimations for variable over current load of five-phase squirrel-cage induction motor(IM) to servo control system. In order to high performance control of AC motor using a field oriented control(FOC) and direct torque control(DTC) algorithm, there are required precise motor parameters for slip calculation, flux observer, controller gain, torque command of current components, rotor position, speed estimation, and so on. We are suggest a analyzed estimation results of the motor parameters that developing five-phase squirrel-cage IM have a stator of concentrated winding for experimental within variable over current load at rated input frequency. There are results of stator winding measurement, no-load test, locked-rotor test, variable over current load test, and estimated parameters of equivalent circuits using manufactured experimental apparatus by IEEE Standard Test Procedure for Polyphase Induction Motors and Generators 112-2004.

Semi-Custom 방식을 이용한 통신용 디지탈 필터의 집적회로 설계 (A Design of Digital Filter IC Using a Semi-Custom Design Method)

  • 이광업;김봉열;이문기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
    • /
    • pp.850-853
    • /
    • 1987
  • A VLSI digital filter design using a semi-custom method is described. The digital filters composed of TDM/FDM Transmultiplexer are designed. Using the polyphase network approach a filter bank composed of only all-pass digital filter sections was designed. The use of all-pass filters as basic building blocks is shown to provide a transmultiplexer structure that has low computational requirements, low quantization noise, and high modularity. The silicon compiler systems is used to reduce the design time and increase the credibility of designed filters. A design of 1st order and 2nd order all pass filters is done using CMOS 2um N-well double metal cell.

  • PDF

새로운 위상변성 방법 (A New Method of Phase Transformation)

  • 오상세
    • 전기의세계
    • /
    • 제13권3호
    • /
    • pp.38-41
    • /
    • 1964
  • This thesis is aimed to obtain efficiently economically any desired phases and single phase transformer without unbalance by using only a new transformer, applying the theory of rotating magnetic field. The brief construction and principle is as floow: two pieces of similar ring cores, triangular cores or polygonal cores are located on the upper and lower sides with equidistance. And the some number of similar leg cores, shaped a square-pillar or a sylinder, are arranged at equidistant of the core section. Ring windings or polyphase windings of AC machines are adopted as a winding method on the upper and lower cores. Three phase AC is applied to the primary windings on these cores so that the rotating magnetic field is induced on the cores and this magnetic fluxes pass through each of the secondary windings on the leg-cores with some difference in time.

  • PDF