• Carbon letters
• /
• v.15 no.2
• /
• pp.129-135
• /
• 2014

Spinnable pitch for melt-electrospinning was obtained from pyrolized fuel oil by electron beam (E-beam) radiation treatment. The modified pitch was characterized by measuring its elemental composition, softening point, viscosity, molecular weight, and spinnability. The softening point and viscosity properties of the modified pitch were influenced by reforming types (heat or E-beam radiation treatment) and the use of a catalyst. The softening point and molecular weight were increased in proportion to absorbed doses of E-beam radiation and added $AlCl_3$ due to the formation of pitch by free radical polymerization. The range of the molecular weight distribution of the modified pitch becomes narrow with better spinning owing to the generated aromatic compounds with similar molecular weight. The diameter of melt-electrospun pitch fibers under applied power of 20 kV decreased 53% ($4.7{\pm}0.9{\mu}m$) compared to that of melt-spun pitch fibers ($10.2{\pm}2.8{\mu}m$). It is found that E-beam treatment for reforming could be a promising method in terms of time-savings and cost-effectiveness, and the melt-electrospinning method is suitable for the preparation of thinner fibers than those obtained with the conventional melt-spinning method.

• Membrane and Water Treatment
• /
• v.4 no.2
• /
• pp.109-126
• /
• 2013

Surface modification by low-pressure ammonia ($NH_3$) plasma on commercial thin-film composite (TFC) membranes was investigated in this study. Surface hydrophilicity, total surface free energy, ion exchange capacity (IEC) and zeta (${\zeta}$)-potentials were determined for the TFC membranes. Qualitative and quantitative analyses of the membrane surface chemistry were conducted by attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy. Results showed that the $NH_3$ plasma treatment increased the surface hydrophilicity, in particular at a plasma treatment time longer than 5 min at 50 W of plasma power. Total surface free energy was influenced by the basic polar components introduced by the $NH_3$ plasma, and isoelectric point (IEP) was shifted to higher pH region after the modification. A ten (10) min $NH_3$ plasma treatment at 90 W was found to be adequate for the TFC membrane modification, resulting in a membrane with better characteristics than the TFC membranes without the modification for water treatment. The thin-film chemistry (i.e., fully-aromatic and semi-aromatic nature in the interfacial polymerization) influenced the initial stage of plasma modification.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.357-357
• /
• 2000

In this study, we consider a multi-input multi-output styrene polymerization reactor system for which the monomer conversion and the weight average molecular weight are controlled by manipulating the jacket inlet temperature and the feed flow rate. The reactor system is identified by using a linear subspace identification method and then the output feedback model predictive controller is constructed on the basis of the identified model. Here we use the Best Linear Unbiased Estimation (BLUE) filter as a stochastic estimator instead of the Kalman filter. The BLUE filter observes the state successfully without any a priori information of initial states. In contrast to the Kalman filter, the BLUE filter eliminates the offset by observing the state of the augmented system regardless of a priori information of the initial state for an integral white noise augmented system. A BLUE filter has a finite impulse response (FIR) structure which utilizes finite measurements and inputs on the most recent time interval [i-N, i] in order to avoid long processing times.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.3
• /
• pp.55-62
• /
• 2015

Paper mulberry fibers have been used as fibrous raw materials for manufacturing traditional handmade paper, hanji for a long time. Compared to wood pulp fibers, pulp fibers from mulberry bast tissue have some benefits in physical and chemical properties due to their high D.P (degree of polymerization), M.W (molecule weight) and long fiber length. Specially, Korean handmade hanji shows outstanding characteristics in mechanical tensile strength, folding endurance, flexibility and long sustainable conservation properties. Therefore, hanji is widely applied to daily supplies, hygienic goods, medical supplies, clothing industries and so on. Recently, the potential demand of mulberry pulp fibers is more and more increased on the strength of high application fields. This study was focused on the possibility of wastewater recycling in unit operation systems for the development of automated mass production line. The properties and environmental loads of wastewater from debarking, cooking, bleaching and screening process were analyzed by means of COD, conductivity, turbidity and solid materials. The wastewater from debarking and cooking process was comparatively high in pollution load, and would be treated by additional approaches of chemico-physical method.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.3
• /
• pp.267-270
• /
• 2006

In Korea, for a long time Rhus verniciflua has traditionally been used as an herbal medicines plants. A stem of Rhus verniciflua has been used to treat gastrointestinal trouble with in form of boiled chicken as a folk medicine. But it has been recognized as an extremely active allergen causing skin reactions. The chief allergenic component, urushiol, is found within the oleoresinous sap of Rhus verniciflua. Most components of urushiol have unsaturated side chains. These unsaturated side chains of urushiol are important to polymerization of these natural products. The urushiol components in Korean lacquer were isolated by reversed phase HPLC. The molecular weight of purified urushiol was determined as 340 from mass analysis. This compound was identified as Heptadecatetraenyl catechol (MW 340).

• The Journal of Korean Physical Therapy
• /
• v.4 no.1
• /
• pp.13-18
• /
• 1992

Most of the electromagnetic agents used in physical therapy rely for their effects on tissue heating and photoreaction of the body. Infrared and untraviolet light on the other hand, owns its place in medicine because it produces direct photochemial reaction when it interacts with the body. This study was carried out to investigate and review for photoreaction of the akin. The results were an follows. 1. The effects of the infrared are heat production, increasing metabolism, increasing circulation, vasodilatation and pigmentation. 2. Directed photoreactions are divided into acute reaction and chronic reaction, and the acute reaction makes pigmentation from $290\~320nm$ of ultraviolet ray. 3. Ultraviolet ray formated pigmentations, which are melanoblasts excited from ultraviolet ray and received chemical stimulation, that make melanin granule. 4. If exposured with long duration, at ultraviolet ray, it makes skin thickening and epithelioma. 5. Indirected photoreaction is made by existenced hypersensitivity of photoreaction or lack of photodefence structure. 6. The phototoxic reactions are synthesized by chemical reaction of excitement from ultraviolet ray also this time analysis, synthesis and polymerization from energy of a circumferenced substance. 7. Sunscreen substances are P-amino benzoic acid and oxidate titan.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.621-628
• /
• 2000

Microporous polypropylene (PP) membranes have the high chemical and corrosion resistance, the good mechanical properties and the thermal stability under high temperatures, but its application is restricted within narrow limits due to hydrophobicity of membranes. In order to impart permanent hydrophilicity to the PP microfiltration membrane, the radiation-induced graft of 2-hydroxyethyl methacrylate (HEMA) and acrylic acid (AAc) containing hydrophilic functional group onto the membrane has been studied. The effect of graft conditions such as reaction time, total radiation dose, reaction temperatures, acid compositions on graft yield was investigated. Modified PP membranes were shown to cause an increase in the gas flux. Oil emulsion permeation flux of both original PP membrane and modified PP membrane was examined.

• Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.187-191
• /
• 1998

Chemotherapy can not be applied for the control of fish viral diseases because viruses depend on host machinery for their replication. Although new control strategies including vaccination are under development, avoidance of virus introduction by rapid and correct diagnosis is the best way of fish viral disease control. Although observation of virus particles with an electron microscope is an easy method for virus detection, it take a few days for the sample preparation. In order to shorten the sample preparation time, microwave radiation was applied in the procedure. With this method, 15 seconds was enough for fixation of virus infected fish samples or cultured cells inoculated with infectious hematopoietic necrosis virus, which takes 2-4 hours with routine methods. Also four minutes was enough for polymerization of embedding resin which takes 24-48 hours with routine methods. Samples prepared with microwave were good enough for direct electron microscopic observation and immunogold labeling assay.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.478-483
• /
• 2004

Two different diene monomers [dicyclopentadiene (DCPD) and 5-ethylidene-2-norbornene (ENB)] as self-healing agents for polymeric composites were microencapsuled by in situ polymerization of urea and formaldehyde. We obtained plots of the storage modulus (G') and tan $\delta$ as a function of cure time by using dynamic mechanical analysis to investigate the cure behavior of the unreacted self-healing agent mixture in the presence of a catalyst. Glass transition temperatures (T$\_$g/) and exothermic reactions of samples cured for 5 and 120 min in the presence of different amounts of the catalyst were analyzed by differential scanning calorimetry. Of the two dienes, ENB may have advantages as a self-healing agent because, when cured under same conditions as DCPD, it reacts much faster in the presence of a much lower amount of catalyst, has no melting point, and produces a resin that has a higher value of T$\_$g/. Microcapsules containing the healing agent were successfully formed from both of the diene monomers and were characterized by thermogravimetric analysis. Optical microscopy and a particle size analyzer were employed to observe the morphology and size distribution, respectively, of the microcapsules. The microcapsules exhibited similar thermal properties as well as particle shapes and sizes.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.4
• /
• pp.220-225
• /
• 2004

A new ion beam extraction system is designed using a simple ion mass filter and a micro mass balance and a QMS based detecting system. A quadrupole Mass Filter is used for selective ion beam formation from inductively coupled high density plasma sources with appropriate electrostatic lens and final analyzing QMS. Also a quartz crystal microbalance is set between a QMF and a QMS to measure the etching and polymerization rate of the mass selected ion beam. An inductively coupled plasma was used as a ion/radical source which had an electron temperature of 4-8 eV and electron density of $4${\times}$10^{11}$＃/㎤. A computer interfaced system through 12bit AD-DA board can control the pass ion mass of the qmf by setting RF/DC voltage ratio applied to the quadrupoles so that time modulation of pass ion's mass is possible. So the direct measurements of ion - surface chemistry can be possible in a resolution of $1\AA$/sec based on the qcm's sensitivity. A full set of driving software and hardware setting is successfully carried out to get fundamental plasma information of the ICP source and analysed $Ar^{+}$ beam was detected at the $2^{nd}$ QMS.