• Macromolecular Research
• /
• v.15 no.5
• /
• pp.465-468
• /
• 2007

• Korean Journal of Animal Reproduction
• /
• v.20 no.2
• /
• pp.143-153
• /
• 1996

To improve the efficiency of nuclear transplantation in the rabbit, this study were evaluated the influence of celly cycle of donor nuclei on the in vitro developmental potential in the nuclear transplant embryos. The embryos of 16-cell stage were collected from the mated does at 48h post-hCG injection and they were synchronized to G1 phase of 32-cell stage. Synchronization of the cell cylce of blastomeres were induced, first, using an microtubules polymerization inhibitor, 0.5$\mu\textrm{g}$/ml colcemid for 10h to arrest blastomeres in metaphase, and secondly, using a DNA synthesis inhibitor, 0.1$\mu\textrm{g}$/ml aphidicolin for 1.5 to 2h to cleave to 32-cell stage and arrest them in G1 phase. The separated G1 phase blastomeres of 32-cell stage were injectied into enucleated recipient cytoplasms by micromanipulation. After culture until 20h post-hCG injection, the nuclear transplant oocytes were electrofused and activated by electrical stimulation. The nuclear transplant embryos were co-cultured for 120h. In vitro cultured embryos were monitored every 24h to assess for development rate. After in vitro cultue for 120h, the nuclear transplant embryos developed to blastocyst stage were stained with Hoechst 33342 dye for counting the number of blastomeres under a fluorescence microscopy. The cleavage rate of blastomeres from 16-cell stage stage rabbit embryos treated with colcemid for 10h or aphidicolin for 6h following colcemid for 10h were not significantly different. The electrofusion rate was similar by high in S and G1 phase donor nuclei as 80.6 and 79.1%, respectively. However, the nuclear transplant embryos using G1 phase donor nuclei were developed to blastocyst at high rate(60.3%) than those using S phase donor nuclei(26.0%). Moreover, the mean blastocyst stage were increased significantly(P<0.05) with the G1 phase donor nuclei(176.6 cells and 1.50 cycles), as compared with the S phase donor nuclei(136.6 cells and 1.42 cycles). These results show that the blastomeres of G1 phase were more successful as donor nuclei in the nuclear transplant procedure, compared with S phase.

• Macromolecular Research
• /
• v.11 no.6
• /
• pp.399-409
• /
• 2003

The first esterification reactor in the continuous polymerization of poly(ethylene terephthalate) has been analyzed by solving the material balances for the two-phase system with respect to the solubility of terephthalic acid. The Newton-Raphson method was used to solve the material balance equations instead of the Simplex method that is frequently used for finding a minimum point of a residual rather than a solution of an equation. A solution for the material balance equations, with the constraint of non-zero liquid phase fraction, could not be obtained with the solubility data of Yamada et al., but could be obtained with solubilities over a minimum value that is larger than their data. Thus, the solubility data of Yamada et al. are considered to be too small. On the other hand, the solubility data of Baranova and Kremer are so large that they gave a solution with the liquid phase only. Based on our results, several typical solubility curves satisfying the constraint of a non-zero liquid phase fraction are suggested in this study; we studied the reaction characteristics of the system using these curves. A higher temperature and a lower pressure are preferred for reducing the content of diethylene glycol.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.287-292
• /
• 2002

Graft copolymerization of styrene and glycidyl methacrylate (GMA) to the peroxidized polypropylene (PP) fabric with E-beam in $O_2$ atmosphere was carried out in vapor phase with benzoyl peroxide (BPO) as an initiator. The degree of grafting of copolymers was increased with the increase of the reaction temperature and the highest degree of grafting was obtained at $70^{\circ}C$ with styrene, and at $80^{\circ}C$ with GMA. The highest degree of grafting of styrene grafted PP according to reaction time was higher than that of GMA grafted PP. In vapor phase graft polymerization, the degree of grafting of copolymers according to water composition in monomer mixture was effected by the boiling temperature of monomers.

• Journal of Integrative Natural Science
• /
• v.6 no.4
• /
• pp.215-219
• /
• 2013

In this study, in order to investigate how consecutive treatments of glass surface with HF acid and water vapor/Ar plasma affect the quality of 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM), poly(3,4-ethylenedioxythiophene) (PEDOT) thin films were vapor phase-polymerized immediately after spin coating of FeCl3 and poly-urethane diol-mixed oxidant solution on the monolayer surfaces prepared at various treatment conditions. For the film characterization, various poweful tools were used, e.g., FE-SEM, an optical microscope, four point probe, and a contact angle analyzer. The characterization revealed that a well prepared APS-SAM on a glass surface treated with water vapor/Ar plasma is very useful for uniform coating of FeCl3 and DUDO mixed oxidant solution, regardless of HF treatment. On the other hand, a bare glass surface without APS-SAM but treated with HF and water vapor/Ar plasma generally led to a very poor oxidant film. As a result, PEDOT films vapor phase-polymerized on APS-SAM surfaces are far superior to those on bare glass surfaces in the quality and electrical characteristics aspects.

• Advances in materials Research
• /
• v.9 no.4
• /
• pp.251-263
• /
• 2020

α-mangostin imprinted polymers have been synthesized by a non-covalent imprinting approach with α-mangostin as a template molecule. The α-mangostin molecularly imprinted polymers (MIPs) prepared by radical polymerization using methacrylic acid, ethlylene glycol dimethacrylate, benzoyl peroxide, and acetonitrile, as a monomer, crosslinker, initiator, and porogen, respectively. The template was removed by using methanol:acetic acid 90:10 (v/v). The physical characteristics of the polymers were investigated by Fourier Transform Infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The rebinding studies were carried out by batch methods. The results exhibited that the MIPs was able to adsorb the α-mangostin at pH 2 and the contact time of 180 min. The kinetic adsorption data of α-mangostin performed the pseudo-second order model and followed the Langmuir isotherm model with the adsorption capacity of 16.19 mg·g-1. MIPs applied as a sorbent material in solid-phase extraction, namely molecularly imprinted solid-phase extraction (MISPE) and it shows the ability for enrichment and clean-up of α-mangostin from the complex matrix in medicinal herbal product and crude extract of mangosteen (Garcinia mangostana L.) pericarp. Both samples, respectively, which were spiked with α-mangostin gives recovery more than 90% after through by MISPE in all concentration ranges.

• Clean Technology
• /
• v.11 no.1
• /
• pp.41-50
• /
• 2005

In this study, semibatch emulsion copolymerization of n-BA as adhesive component and MMA as coagulant component were carried out for the stable acrylic polymer latex in aqueous phase for polymer cement using LE-type nonionic surfactant as environmental friendly surfactant. The stable polymer emulsion was obtained with the increases of chain length(n) of this surfactant. The effect on the amount of LE-50 as nonionic surfactant were showed that the concentration of polymer latex were increased by increasing the amount of LE-50, whereas the average particle size were decreased by increasing the amount. The addition of functional monomer in initial reactor charge showed a significant effect on the final polymer concentration and the latex particle size. The single polymerization of each n-BA or MMA showed a very low concentration of polymer latex and very big particle size due to coagulation. In the polymerization composed of mixed monomer with MMA and n-BA, the larger the ratio of MMA to n-BA in the copolymers, the greater the amount of coagulum produced. It was found that a stable copolymers were obtained in the range of 15-35 % of n-BA. Moreover, incorporation of some functional monomers in addition to of main monomers became more stable polymer latex. Through DSC and IR analysis, the final polymer latex was composed by MMA/n-BA/AA/AM with a single Tg depending on the reaction conditions. As a result, the conditions of this acrylic polymerization could also be effectively controlled to get the desired final products.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.232-238
• /
• 2014

Solution polymerization was conducted with water-soluble acrylic acid (AA) as a monomer and potassium persulfate (KPS) as an initiator at a selected temperature between $60^{\circ}C$ and $90^{\circ}C$ with water as a reaction medium. When the ratio between AA and water was reduced or initiator concentration increased, molecular weights decreased. An increase in the reaction temperature produced lower molecular weights. The polydispersity index was close to 1.5 in most of the reactions. An increase in the stirring speed up to 400 rpm led to a progressive increase in molecular weights. When the stirring speed reached 800 rpm, however, we found that both the number and weight average molecular weights decreased. The glass transition temperature was nearly independent of moelcular weights and determined to be between $113^{\circ}C$ and $116^{\circ}C$.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.305-311
• /
• 2019

The acrylic copolymer was designed and prepared for soft lens with high content. The copolymers were prepared using 2-hydroxyethyl methacrylate(HEMA) as a monomer and ethylene glycol dimethacrylate(EGDMA), glycerol dimethacrylate(GD), or glycerol 1,3-diglycerolate diacrylate (GDD) as a cross linking agent. The water content for high water content lens was 46%, which was higher compared to general purpose of 36%. The contact angle decreased from 38.6 to 34.4, which appears hydrophilic surface. The tensile strength decreased from 0.1 Mpato 0.08, then again to 0.05 as hydrophilic properties of cross linking agents increased. No phase separation was observed in the cross section of lens using scanning electron microscope. The real-time infrared technique was used in photo-polymerization. The initial polymerization rate increased from 0.6 to 0.9, depending on crosslinking agent.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.10 no.1
• /
• pp.31-39
• /
• 2002

Microencapsulated pcm (MPCM) particles are mixed with distilled water and utilized to evaluate its characteristics and performance as a thermal storage medium transporting heat. For the present study, tetradecane ($C_14$$H_30$, $T_m$=5.5$^{\circ}C$) is capsulated in the core, coated with the melamine for their surface. The size of particles is well-controlled under 10$\mu$m in the process of in-situ polymerization with melamine-formaldehyde resin. For the experiment, the concentractions of slurries are prepared for 20 wt%, 30 wt%, and 40 wt%. The results are compared with those of water and 100% tetradecane oil. The pure water and tetradecane start solidifying within 20 minutes after introducing cooling water into the thermal storage tank whose flow rates are varied by 125 cc/min, 250 cc/min, and 500 cc/min. However, MPCM slurries are required relatively longer period of time for their phase change than pure phase change materials. That is, the entrained MPCM particles restrict their heat transfer in terms of natural convection and conduction to them.