• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.687-691
• /
• 2005

We demonstrated stability-enhanced liquid crystal (LC) displays using pixel-iosolated LC mode in which LC molecules are isolated in pixel by horizontal polymer layer and vertical polymer wall. The device shows good electro-optic properties with external pressure and bending due to the polymer structures. The polymer wall acts as supporting structure from mechanical pressure and maintains the cell gap from bending. Moreover, the polymer layer acts as adhesive for tight attachment of two substrates. We presented various methods to produce the polymer structures by using anisotropic phase separation from LC and polymer composites or patterned micro-structures.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.473-476
• /
• 2003

This paper shows necessity of encapsulation layer to maximite flexibility of brittle indium-tin-oxide (ITO) on polymer substrates. And, Young's modulus (E) of encapsulation layer have an significant effect on external bending stress and the coefficient of thermal expansion (CTE) of that have a significant effect on internal thermal stress. To compare magnitude of total mechanical stress including both bending stress and thermal stress, the mechanical stress of triple-layer structure (substrate / ITO / encapsulation layer or substrate / buffer layer / ITO) can be quantified and numerically analyzed through the farthest cracked island position. As a result, it should be noted that multi-layer structures with more elastic encapsulation material have small mechanical stress compared to that of buffer and encapsulation structure of large Young's modulus material when they were externally bent.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.109-111
• /
• 1993

We reported the fabrication and thermal cross-linking of the LB files on porous substrates. The monolayers of the polymers which polyion-conplexed with PAA at the air-water interface can be transferred onto solid substrates such as porous fluorocarbon membrane filter and quartz crystal microbalance. The properties of the monolayers and the LB films investigated by $\pi$-A isothem, FT-IR, and SEM will be discussed. In addition, it was attempted to investigate the reaction of polymer LB films in the organic gas surrounding by the use of LB technique.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.311-311
• /
• 2006

The morphology of Poly(styrene-b-methylmethacrylate) (P(S-b-MMA)) block copolymer thin films deposited on silicon wafers was controlled by treating the substrates with Self-Assembled Monolayers (SAM) of phenylsilanes with different alkyl chain lengths. It was found that the treatment with SAM strongly modified the substrates properties, especillay the surface energy, as compared with bare silicon oxide. By futher adjusting the molecular weight of P(S-b-MMA), a variety of morphologies could be generated, including a perpendicular orientation of lamellea of PS and PMMA, which is required for industrial applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1162-1165
• /
• 2006

In this paper, the characteristics of polycrystalline silicon thin-film transistors (poly- Si TFTs) fabricated on polymer substrates are investigated. The a-Si films was laser annealed by using a XeCl excimer laser and a four-mask-processed poly-Si TFT was fabricated with fully self-aligned top gate structure. The fabricated nMOS TFT showed field-effect mobility of ${\sim}30\;cm^2/Vs$, on/off ratio of $10^5$ and threshold voltage of 5 V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1535-1537
• /
• 2009

High performance resistive type touch panel was fabricated on flexible polyethylene terephthalate (PET) substrates coated with Al- and Ga-codoped ZnO (AGZO) films. The AGZO films were deposited by roll-to-roll direct current magnetron sputter at room temperature. The AGZO thin films on PET substrates showed high transparency (> 85 % at 550 nm) and low sheet resistance (450 ${\Omega}$/sq.). These values were similar to those of commercial ITO films used for resistive type touch panel.

• Journal of Information Display
• /
• 제12권2호
• /
• pp.97-99
• /
• 2011

We report flexible, bistable cholesteric displays utilizing polyester (PET) substrates with printed internal black electrodes. The black electrodes consist of carbon ink dispersed in butyl carbitol using a patented roll-to-roll gravure-offset printing. A transparent conducting polymer printed on PET serves as the counter electrode. The electro-optic material is a chiral nematic mixture dispersed in a low-concentration polymer binder. The device can be switched between scattering (black) and reflective (vibrant green) states upon application of an electric pulse. The internal black electrode enhances the contrast of the display and simplifies the roll-to-roll manufacture of flexible displays.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.109-110
• /
• 2005

Cadmium sulphide (CdS) films have been prepared on polycarbonate (PC), polyethylene terephthalate (PET), and Coming 7059 substrates by r.f. magnetron sputtering technique at room temperature. A comparison of the properties of the films deposited on polymer and glass substrates was performed. In addition, the influence of the sputter power on the structural and optical properties of these films was evaluated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.487-488
• /
• 2005

We have investigated the Electro-Optical Characteristics for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on glass.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.145-146
• /
• 2005

Cadmium sulphide (CdS) films have been prepared on polycarbonate (PC), polyethylene terephthalate (PET), and Coming 7059 substrates by r.f. magnetron sputtering technique at room temperature. A comparison of the properties of the films deposited on polymer and glass substrates was performed. In addition, the effect of the sputter pressure on the structural and optical properties of these films was evaluated.