• 콘크리트학회논문집
• /
• 제16권5호
• /
• pp.651-657
• /
• 2004

본 연구에서는 재유화형 분말수지 혼입 고유동 폴리머 시멘트 모르타르의 공기량, 응결시간, 건조수축 및 강도특성에 미치는 분말소포제 첨가율 및 수축저감제 첨가량의 영향에 대하여 검토하였다. 그 결과, 재유화형 분말수지 혼입 고유동 폴리머시멘트 모르타르의 공기량은 분말소포제 첨가율 및 폴리머-시멘트비의 증가에 따라 감소하는 경향을 보였다. 재유화형 분말수지 혼입 고유동 폴리머 시멘트 모르타르의 응결시간은 분말소포제 첨가율에 관계없이 폴리머-시멘트비의 증가에 따라 늦어지는 경향을 보였다. 재유화형 분말수지 혼입 고유동 폴리머 시멘트 모르타르의 건조수축은 분말소포제 첨가율에 관계없이 폴리머-시멘트비 및 분말 수축저감제 첨가율의 증가에 따라 감소하는 경향을 보였다. 또한 분말소포제 첨가율 및 수축저감제 첨가율에 관계없이 재유화형 분말수지 혼입 고유동 폴리머 시멘트 모르타르의 휭 및 인장강도는 폴리머-시멘트비의 증가에 따라 증가하는 경향을 보였으나, 압축강도는 감소하는 경향을 보였다.

• 폴리머
• /
• 제32권6호
• /
• pp.603-609
• /
• 2008

본 연구에서는 MMA(methyl methacrylate)와 BA(buthyl acrylate)를 단량체로 이용한 폴리머 시멘트 모르타르의 단량체 비에 따른 성질을 파악하고 시멘트 혼화용 폴리머로 활용하기 위한 기초적 자료를 얻고자 하였다. 본 연구결과 MMA/BA를 이용한 폴리머 시멘트 모르타르의 전 세공용적은 MMA/BA의 단량체 비가 증가할수록 감소하는 것으로 나타났다. 강도특성에서는 전체적으로 MMA/BA의 단량체 비가 70 : 30, 그리고 80 : 20일 때, 폴리머 시멘트 비가 15%일 때 가장 우수한 증진효과를 나타냈다. 폴리머 시멘트 모르타르의 내구성을 측정하는 흡수율, 염화물 이온 침투 저항성, 중성화 저항성에서는 단량체 비에 따른 개선보다는 폴리머 시멘트 비에 따른 개선효과가 더 큰 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.175-176
• /
• 2013

Nowadays, energy-saving has become important in the construction industry. Above all things, outside insulation on buildings is important in measure of energy-saving. However, its insulation performance is degraded by the problem of that Cement-polymer modified waterproof coatings are used mostly for covering plaster mortar. In this study, we examine the optimum size of the silica and how does silica's size effect on physical properties of outside insulation covering plaster mortar.

• Computers and Concrete
• /
• 제18권5호
• /
• pp.951-968
• /
• 2016

In this study, pullout capacities of post-installed deformed bars anchored in low strength concrete using different bonding materials are investigated experimentally. The experimental study was conducted under outdoor and indoor conditions; on the beams of an actual reinforced concrete building and on concrete bases constructed at Istanbul Technical University (ITU). Ready-mixed cement based anchorage mortar with modified polymers (M1), ordinary cement with modified polymer admixture (M2), and epoxy based anchorage mortar with two components (E) were used as bonding material. Furthermore, test results are compared with the predictions of current analytical models. Findings of the study showed that properly designed cement based mortars can be efficiently used for anchoring deformed bars in low quality concrete. It is important to note that the cost of cement based mortar is much lower with respect to conventional epoxy based anchorage materials.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.1005-1010
• /
• 2001

Recently, polymer-modified mortar has been studied for proposed use on industrial floors as top layers with thin thicknesses, typically 5~ 15mm. The purpose of this study is to evaluate basic properties of self leveling materials using polymer modifier as kinds of SBR, PAE, SUBA. Superplasticizer and thickener have been included in the mixes to reduce bleeding and drying shrinkage as well as in order to facilitate the workability required. The self leveling materials using four types of polymer dispersion are prepared with polymer-cement ratios which respectively range from 50%, 75%, and were tested for basic characteristics such as adhesion in tension, crack resistance test, rebound test after the preparative tests for unit weight, air content, consistency ratio etc. The results show almost as equal quality as existing commercial industrial flooring when mortar is modified by polymer dispersion. Adhesion in tension of polymer modified mortars using each SBR and PAE emulsion was over 10 kgf/$cm^{2}$. Crack or flaw derived from shrinkage is strongly dependent on the type of polymer dispersion because of each different total solid of polymer. It is judged that polymer modified mortar with self-leveling can be very well suited for Floor-finished.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.253-254
• /
• 2011

The purpose of this study is to investigate chloride ion adsoption property of cement mortar using nitrite type hydrocalumite(calumite) with self-corrosion inhibition function. Superior corrosion inhibition function of the VA/E/MMA-modified mortars with calumite was ascertained from accelerated corrosion test in the previous study. In this study, VA/E/MMA-modified mortars with calumite were prepared with calumite contents of 0, 5, 10% and polymer-binder ratio of 0, 10%, and tested for chloride ion adsorption to make it clear how calumite gives self-corrosion inhibition function to cement mortar. As a result, chloride ion adsorption property of VA/E/MMA-modified mortars with calumite was improved by increasing calumite contents compared to unmodified mortar regardless of using VA/E/MMA terpolymer powder or not.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.252-255
• /
• 2003

Recently, there is a growing trend in the United States toward replacing latex additives in polymer-modified cement mortars with redispersible polymer powders. This movement is relatively new in the U.S. but is further advanced in Europe due to the more extensive use of cement and concrete in residential construction. Hitherto, in Korea - there is a very diminutive movement towards this growing trend. Thus, there is limited availability of data on redispersible polymer powders. This study investigates the effectiveness of redispersible polymer powder on improvement of the mechanical properties of modified mortar. It was concluded from the results of the experiments that the size of the dispersed polymer particles, variations in glass transition points (Tg), and variations in minimum film formation temperature (MFT) influenced the strength development of the modified mortars, and optimum strength in modified mortars using redispersible powders can be achieved when the Tg which accounts for the degree of powder flexibility is considered.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.375-380
• /
• 1997

The purpose of this study is to examine the properties of polymer-modified mortars using asphalt emulsion. The polymer-modified mortars using asphalt emulsion with various asphalt-cement ratios are prepared, and tested for flexural and compressive strengths, water absorption and permeability, carbonation, Cl ion penetration and chemical resistance. From the test results, the flexural and compressive strengths, water absorption and permeability, carbonation and Cl ion penetration depths of polymer-modified mortars using asphalt emulsion tend to be decreased with increasing asphalt-cement ratio, and chemical resistance is improved. It is evident that polymer-modified mortars using asphalt emulsion having an excellent properties as a waterproof and finish materials can be produced.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.368-373
• /
• 1998

Prepackaged system consists out of a dry mix which contains cement, sand, redispersible polymer powder and admixtures in the right proportions. The purpose of this study is to evaluate the quality of prepackaged-type polymer-modified mortar products using redispersible poly(ethylene-vinyl acetate)(EVA) powder. Polymer-modified mortars using the redispersible polymer powder with powdered with powdered shrinkage-reducing agent were prepared with cellulose fiber contents of 0, 0.5, 1.0% and shrinkage-reducing agent contents of 0, 4%, and tested for drying shrinkage, strength, adhesion in tension, water absorption. From the test results, the prepackaged-type polymer-modified mortar products with 4% of shrinkage-reducing agent content give good properties. and that their properties largely depends on the shrinkage-reducing agent content rather than the cellulose fiber contents.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.165-168
• /
• 2002

The effects of polymer-cement ratio, antifoamer agent content and shrinkage-reducing agent content on the drying shrinkage of polymer-modified mortars using redispersible polymer powder are examined. As a result, irrespective of the antifoamer content, the drying shrinkage of the polymer-modified mortars using redispersible polymer powder tend to decrease with increasing polymer-cement ratio and shrinkage-reducing agent content. Such a drying shrinkage development is due to the effect of reducing water from incorporation of EVA redispersible polymer powder and antifoamer agent.