• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.5
• /
• pp.525-530
• /
• 2021

The purpose of this study was to investigate the effect of spherodizing heat treatment holding time on the microstructure and mechanical properties of the accelerated cooling-treated API X70 steel, which is mainly used as a structural material for line pipe steel for natural gas pipes. The accelerated cooling-treated API X70 steel was spherodizing treated at 700℃ for 12~48 h. The microstructure was observed using an OM and a FEG-SEM, and mechanical properties were obtained by tensile test. The microstructure of the API X70 steel was banded in the hot rolling direction, and the polygonal ferrite(PF) adjacent to pearlite(P) has mainly a fine size, and coarse PF and fine acicular ferrite were formed in the middle of P and P. As the spherodizing treatment time increased, the number of carbide particles decreased and its distribution interval increased, and the ferrite grain size was coarsened. The tensile strength decreased and the ductility increased with spherodizing treatment time, and the yield point elongation was disappeared in a stress-strain curve after the spherodizing treatment.

• Advances in concrete construction
• /
• v.11 no.4
• /
• pp.347-356
• /
• 2021

To address the limitation of the commonly used steam curing of reactive powder concrete (SC-RPC) in engineering, a preparation technology of normal curing reactive powder concrete (NC-RPC) is proposed. In this study, an experimental comparative research on the mechanical properties of NC-RPC and SC-RPC under uniaxial tension is conducted. Under the premise of giving full play to the ultra-high performance of RPC, the paper tries to explore whether normal curing can replace steam curing. The results show that various mechanical indexes of NC-RPC (e.g., tensile strength, ultimate tensile strain, elastic modulus and deformation performance) could basically reach the mechanical index values in steam curing at 28d age, some performance is even better at a longer age. So it affirms the feasibility of normal curing. In this paper, the influence of normal curing age on the tensile properties of RPC is discussed, and the relationship between each index and age is introduced in detail. Based on the experimental data, the tensile mechanism of RPC is analyzed theoretically, and two kinds of tensile constitutive models for RPC are proposed, one is curvilinear model, and another one is polygonal line model. The validity of the two models is further verified by the test results of others.

• Journal of Veterinary Clinics
• /
• v.27 no.3
• /
• pp.232-239
• /
• 2010

Two cell lines derived from spontaneous canine mammary gland tumors were established and characterized. Mammary gland tumors from 9 years old pug and 9 years old toy-poodle dogs were collected by aseptic surgical resection and primary culture was performed. The histopathologic examination of tumors revealed adenocarcinoma and complex carcinoma and two dogs died from metastasis of the tumors. The tumor cells were subcultured over 60 times for more than 1 year and morphological consistency maintained. Light microscopic examination, growth curve, doubling time calculation, xenotransplantation to female nude mice, immunohistochemistry for wide spectrum keratin, vimentin, $\alpha$-smooth muscle actin and cytokeratin 8 was performed for characterization. The cell lines exhibited polygonal, elongated cell shape and cytoplasmic bridge and doubling time of 47.1 hrs and 18.6 hrs, respectively. Subcutaneous xenotransplantation to nude mice of the cells produced localized palpable mass within 4 weeks in 4 of 5 and 5 of 5 nude mice, respectively. In immunohistochemical examination one cell line showed strong positive against wide spectrum keratin and cytokeratin 8 and the other cell line showed strong positive against smooth muscle actin and cytokeratin 8. Additional characterization would be possible by investigator's needs and the cell lines may be useful for in vivo and in vitro studies of canine mammary tumor and adjuvant therapies.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.15-22
• /
• 2003

A film scanner is one of the input devices for ac acquiring high resolution and high qualify of digital images from the existing optical film. Recently the demand of film scanners have risen for experts of image printing and editing fields. However, due to the nonlinear characteristic of light source and sensor, colors of the original film image do not correspond to the colors of the scanned image. Therefore color correction for the scanned digital image is essential in film scanner. In this paper, neural network method is applied for the color correction to CIE L/sup *//a/sup *//b/sup */ color model data converted from RGB color model data. Also a film scanner hardware with 12 bit color resolution for each R, G, B and 2400 dpi is implemented by using the TMS320C32 DSP chip and high resolution line sensor. An experimental result shows that the average color correction rate is 79.8%, which is an improvement of 43.5% than our previous method, polygonal regression method.

• Journal of Mechanical Science and Technology
• /
• v.17 no.10
• /
• pp.1431-1442
• /
• 2003

A new method of estimating the pose of a mobile-task robot is developed based upon an active calibration scheme. The utility of a mobile-task robot is widely recognized, which is formed by the serial connection of a mobile robot and a task robot. To be an efficient and precise mobile-task robot, the control uncertainties in the mobile robot should be resolved. Unless the mobile robot provides an accurate and stable base, the task robot cannot perform various tasks. For the control of the mobile robot, an absolute position sensor is necessary. However, on account of rolling and slippage of wheels on the ground, there does not exist any reliable position sensor for the mobile robot. This paper proposes an active calibration scheme to estimate the pose of a mobile robot that carries a task robot on the top. The active calibration scheme is to estimate a pose of the mobile robot using the relative position/orientation to a known object whose location, size, and shape are known a priori. For this calibration, a camera is attached on the top of the task robot to capture the images of the objects. These images are used to estimate the pose of the camera itself with respect to the known objects. Through the homogeneous transformation, the absolute position/orientation of the camera is calculated and propagated to get the pose of a mobile robot. Two types of objects are used here as samples of work-pieces: a polygonal and a cylindrical object. With these two samples, the proposed active calibration scheme is verified experimentally.

• Journal of Periodontal and Implant Science
• /
• v.34 no.2
• /
• pp.317-332
• /
• 2004

Osteoblasts from alveolar bone may have an important role in the bone regeneration for periodontium, but their culture and characterization are not determined yet. The purpose of this study was to investigate the biological characteristics of primary explant cultured osteoblasts(PECO) from alveolar bone. Osteoblasts were isolated and cultured from alveolar socket of extracted tooth in children. To compare the characteristics, osteoblasts and gingival fibroblasts were cultured with DMEM at $37^{\circ}C$, 5% $CO_2$, l00% humidity incubator, and human fetal osteoblasts cell line(hFOB1) were cultured with DMEM at $34^{\circ}C$, 5%, $CO_2$ 100% humidity incubator. To characterize the isolated bone cells, morphologic change, cell proliferation and differentiation were measured. Morphology of PECO was small round body or cuboidal shape on inverted microscope and was similar with hFOB1. PECO became polygonal shape with stellate and had an amorphous shape at 9th passage in culture. PECO had significantly higher activity than that of gingival fibroblasts and hFOB1 in alkaline phosphatase activity. The expression of osteocalcin and bone sialoprotein in PECO was notably increased when compared with hFOB1 and gingival fibroblasts. These result indicated that PECO from alveolar bone in children has an obvious characteristics of osteoblast, maybe applied for the regeneration of bone.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.4
• /
• pp.247-259
• /
• 2011

This research aimed to analyse geomorphic resources of Mt. palgong(in Daegu city and Gyeongbuk province) through some field surveys, and then to clarify geomorphic features. The main results are as follows. 1) The geological boundary of the south slope(granite) is more clear than one of the north slope(granite bedrock and metamorphic sedimentary rock). Small basins are along with fault line between granite bedrock and metamorphic sedimentary rock. 2) It is estimated that relatively big valleys on the north slope are due to local climate, geomorphic and geological features. 3) Tor, sheeting joint, gutter are well developed both on the south slope and on the north slope, however the development of polygonal cracking and boulder stream are more dominant on the south slope; river cliff, pool, waterfall are more dominant on the north slope with valleys that well developed. 4) Scenic geomorphic landscapes are mainly developed in Dongsan valley and Chisan valley on the north slope. 5) There are many interesting geomorphic resources in the viewpoint of storytelling in Mt. Palgong. So the specific design to utilize such resources is required

• Applied Microscopy
• /
• v.36 no.3
• /
• pp.141-153
• /
• 2006

The purpose of this study is to find out how soft contact lens multi-purpose solution (MPS), often used for medical treatment, effects the inhibition on cell growth and research the result of using MPS, suspected to demage eye cells, on rabbit eye's corneal epithelium and endothelium tissue. In this treatise, $ReNu^{(R)}$ (Baush & Lomb, USA), Opti-free $express^{(R)}$ (Alcon, USA), Free-sol $plus^{(R)}$ (Hanamedicon, Korea) had been selected among the MPS. After culturing L929 roil line, cell growth inhibition rate was measured by MTT assay, and by making Hematoxylin and Eosin stain specimen. the morphology was observed by optical microscope. In the In vivo experiment,9 white rabbit eyes (18 eyes) were classified into 3 groups. The experimental group is left eyes (9 eyes) of rabbit, and MPS were dropped; however. the control group, the right eyes (9 eyes), were only used a saline solution without preservatives. After the dropping within the period, the cornea surface of rabbit eyes were stained by Rose bengal and observed. To figure out the changes of the corneal epithelium and endothelium tissue scanning electron microscopy (SEM) has been used. As the result, the rate of cell growth inhibition was 54%. 73% and 36%, respectively. Morphological changes represented that the shape has been changed into oval or round shape and those are not considered as a common formation of L929 cell line. When it comes to staining Rose bengal, each experiment group was stained red which is not shown in controls. The polygonal mosaic pattern of a corneal epithelium was disturbed in the picture taken by SEM; furthermore, the shape of the corneal endothelium was irregular. In conclusion, as we consider antimicrobial effect and the safety on living cells, it is necessary that we should improve concentration of preservatives and study continuously to develop a new preservatives without a toxic effect on the cornea surface.

• Journal of the Korean association of regional geographers
• /
• v.15 no.2
• /
• pp.307-315
• /
• 2009

The purpose of map generalization is a method of map making to transmit the concise cartographic representation and geographic meaning. New generalization algorithm has been developed to be applied in the digital environments by the development of computer cartography. This study aims to look into possibilities of the multiscale mapping by generalization in application with the coordinate transformation and LoD(level of detail) in the web cartography. A method of the coordinate transformation is to improve a transmission of spatial data. Lod is a method which is making web map with selection spatial data by zoom level of users. Layers for test constructed contour line, stream network, the name of a place, a summit of mountain, and administrative office. The generalization was applied to zoom levels by scale for the linear and polygonal features using XML-Based scalable vector graphics(SVG). Resultantly, storage capacity of data was minimized 41% from 9.76mb to 4.08mb in SVG. Generalization of LoD was applied to map elements by stages of the zoom level. In the first stages of zoom level, the main name of places and administrative office, higher order of stream channels, main summit of mountain was represented, and become increase numbers of map elements in the higher levels. Results of this study can help to improve esthetic map and data minimization in web cartography, and also need to make an efforts to research an algorithm on the map generalization over the web.

• Journal of the HCI Society of Korea
• /
• v.1 no.1
• /
• pp.37-44
• /
• 2006

Specular reflections provide the visual feedback that describes the material type of an object, its local shape, and lighting environment. In photorealistic rendering, there have been a number of research available to render specular reflections effectively based on a local reflection model. In traditional cel animations and cartoons, specular reflections plays important role in representing artistic intentions for an object and its related environment reflections, so the shapes of highlights are quite stylistic. In this paper, we present a method to render and control stylized specular reflections using projective textures based on principal curvature analysis. Specifying a texture as a pattern of a highlight and projecting the texture on the specular region of a given 3D model, we can obtain a stylized representation of specular reflections. For a given polygonal model, a view point, and a light source, we first find the maximum specular intensity point, and then locate the texture projector along the line parallel to the normal vector and passing through the point. The orientation of the projector is determined by the principal directions at the point. Finally, the size of the projection frustum is determined by the principal curvatures corresponding to the principal directions. The proposed method can control the position, orientation, and size of the specular reflection efficiently by translating the projector along the principal directions, rotating the projector about the normal vector, and scaling the principal curvatures, respectively. The method is be applicable to real-time applications such as cartoon style 3D games. We implement the method by Microsoft DirectX 9.0c SDK and programmable vertex/pixel shaders on Nvidia GeForce FX 7800 graphics subsystems. According to our experimental results, we can render and control the stylized specular reflections for a 3D model of several ten thousands of triangles in real-time.