• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5600-5607
• /
• 2015

This study investigated experimentally the tensile behavior of polyetylene fiber-reinforced cementless composite. Four types of polyetylene fiber-reinforced cementless composite were designed. The water to binder ratio was 0.30-0.38, and the amount of polyetylene fiber was 1.75 vol%. A series of experiments including uniaxial tension, density, and compression tests were performed to evaluate the performance of the composites. From the test results, it was exhibited that the composite has superior tensile performance such as high tensile strength and tensile strain capacity compared with other types of composites.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.25-30
• /
• 2016

The purpose of this study is to investigate experimentally the effect of reinforcement of polyetylene fiber, inclusion of silica sand, and replacement of cement with fly ash on the compressive and tensile behavior of fiber reinforced composite. Five types of mixture proportions were determined and compressive strength and uniaxial tension tests were performed. Test results showed that strength, ductility, and control of cracking were improved by the reinforcement of fiber. Although the strength was improved by the inclusion of dried silica sand, the ductility was reduced and the crack width was increased. On the other hand, the increase of ductility, the decrease of crack width, and the decrease of strength were observed by the replacement of cement with fly ash.

• Korean Journal of Microbiology
• /
• v.29 no.2
• /
• pp.123-129
• /
• 1991

In order to develop the protoplast fusion method of the strains of Fusarium, the interspecific protoplast fusion was attempted between Fusarium poae and F. sporotrichioides. Various auxotrophic mutants were isolated by the treatment of N-Methyl-N'-Nitro-N-Nitrosoguanidine. The optimal conditions for the formation and regeneration of protoplasts were examined and the characteristics of a fusant were studied. As a results, protoplasts were readily obtained from 18 hours cultured mycelia by the treatment of driselase for 3 hours and 0.6 M KCl as a best osmotic stabilizer at pH 6.0 for the formation of protoplast. Sucrose was the most suitable for the regeneration. Polyetylene glycol (M.W. 8,000) in $CaCl_{2}$-glycine solution was used to induce the protoplast fusion. The interspecific fusion frequency between protoplasts among the auxotrophic mutants of the two strains ranged from $2.7*10^{-2}$ to $5.7*10^{-3}$ . DNA content and cellulase activity were rather increased in the interspecific fusant. The lag phase of growth curve was slightly elongated in the fusant.

• Korean Journal of Materials Research
• /
• v.7 no.1
• /
• pp.15-20
• /
• 1997

목재의 건조 균열방지를 위한 진공흡입기술의 새로운 목재처리방법에 대해 연구를 수행하였다. 목재의 건조균열 방지를 위해 사용된 ployetylene grycogen(PEG) 처리재들은 PEG-1540, PEG-2000, PEG-4000, PEG-10000이었으며, 진공펌프의 감압정도는 85kPa과 39kPa 이었다. 시험결과, 진공흡입처리에 의한 PEG액의 흡입은 방사단면에 걸쳐 고르게 이루워졌음을 확인 할 수 있었다. 또한 PEG의 분자량이 증가할수록 단위시간당 PEG의 분자량이 증가할수록 단위시간당 PEG의 흡입량과 처리전.후의 함수률의 차인$\Delta$ M.C 는 PEG-2000을 변곡점으로 하여 감소하였다. 그리고 리기다 소나무의 건조균열 방지를 위한 약제 흡입처리에 있어 최적의 PEG 분자량과 농도 그리고 감압력의 조건은 각각 PEG-2000과 30%(wt.)그리고 85kPa임을 알 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.164-168
• /
• 1996

The relation between crystallinity and thermal history in low density polyethylene thin films and their effect on electric conduction phenomena and dielectric breakdown was studied. The low density polythylene thin films obtained by the solution growth method heat-treated at 140[$^{\circ}C$] for 2 h and subsequently cooling to various ways. The degree of crystallinity was estimated by the X-ray diffraction measurement for the specimen of slowly cooling, ICE quenching and liquid nitrogen quenching. The result shows that the crystallinity decreases become faster as the cooling speed increased, and that conduction phenomenon is governed by the space charge limited current in high field. It was found that the dielectric breakdown field increases with an increase in cooling speed and test number in self-healing breakdown method.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.1012-1018
• /
• 2006

In this study, the insulation performance of thermal insulation materials such as glass wool, polyetylene and flexible lastomeric foam according to water vapor permeance was estimated by using experimental correlation equation. The results showed the conductivity increment of flexible lastomeric foam which has very low-permeability (${\le}0.15[ng/{\cdot}s{\cdot}Pa]\;or\;{\mu}{\ge}1,000$) is about 50% lower than that of glass wool with the lapse of ten years. The conclusion is that moisture inevitably accumulated in permeable Insulations reduces insulation performance and also accelerates surface condensation in the case of cold water system.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.54-62
• /
• 2012

In this experiment, the optimum concentration of polyols which were used for making transparent soaps was determined using design of experiment (DOE) method. Dipropylene glycol and 1,3 butylene glycol with short chains enhanced the transparency of soap, however, polyethylene glycol 400, glycerin and diglycerin made the soap opaque. The hardness of soap was increased as increasing the concentration of propylene glycol, diglycerin, dipropylene glycol and polyethylene glycol 400. The hardness, transparency, absorbance of water, and friction solubility could be optimized by controlling the concentration of dipropylene glycol, polyetylene glycol, sugar, and triethanolamine.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1908-1914
• /
• 1992

A significant drag reduction in the turbulent flow of CWM(coal Water Mixture) adding minute amounts of high molecular weight polymer additives has been obtained and it was compared with pure CWM.However, the rate of drag reduction could come down with flow time, which is caused by polymer degradation, The rate of drag reduction and polymer degradation is affected by polymer type, concentration, molecular weight, and flow velocity. In the present investigation, these important parameters were evaluated for their influences on polymer degradation in order to find out stable conditions for CWM transportation with time. It was necessary to determine the more effective type of polymer additives to guarantee the optimum conditions for CWM transport. Experiments were undertaken with a test section of pipe diameter 9.8mm and pipe length 3500mm(L/D=357) in a closed loop, and polyacrylamide and polyetylene oxide were utilized as polymer additives. The tests were carried out under the conditions of 200, 400, 700ppm of polymer concentrations. CWM concentrations utilized were 5% and 10% with flow velocities of 4.9m/s and 6.1m/s. Experimental data show that polyehylene oxide degraded faster than polyacrylamide in CWM transport, and polyacryamide is considered to be a more effective candidate as additive for long time-CWM transport. Polymer degradation is also found to be more likely at lower polymer concentrations, at higher flow velocities, and higher CWM concentrations.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.30-30
• /
• 2018

스마트 도금공장을 구축하기 위해서는 도금액 내부의 화학 물질 농도 변화를 측정할 수 있는 화학 센서 기술이 필수적으로 요구된다. 와트욕은 대표적인 고속 니켈 도금액 중 하나로 기본적으로 황산니켈, 염화니켈, 보릭산의 염과 함께 케리어(type-1 광택제), 광택제(type 2-광택제), 응력 제어제 등의 유기 첨가제로 구성되어 있다. 이러한 유기 첨가제는 전차된 니켈층의 두께 균일도, 조도, 미세 구조, 내부 응력 등 다양한 특성을 제어하며, 정밀한 농도 관리가 필수적으로 요구되나, 분석 기술의 부재로 인하여 지금까지도 대부분의 액관리는 할셀법이나 작업자의 경험에 의존하고 있다. Cyclic voltammetry stripping(CVS) 방법은 전기화학 분석 과정에서 나타나는 첨가제의 가속, 감속 특성 등과 여기에 수반되는 stripping peak의 변화를 이용하여 개별 첨가제의 농도를 측정하는 방법이며, 지금까지 인쇄회로기판의 비아필 공정, 전해 동박 제조, 반도체 배선 등 구리도금 산업 전반에 걸쳐 첨가제 관리에 효과적으로 적용되고 있다. 그러나 수소 발생으로 인한 stripping 효율 문제로 인하여 니켈, 주석, 아연 등 표준 환원 전위가 높은 금속 도금액 내부 첨가제 농도 측정은 아직 어려운 상황이다. 본 연구에서는 이 문제를 극복하기 위해 염소를 과량 첨가한 구리 도금액을 CVS 분석의 base 용액으로 이용하여 니켈 도금액 내부 여러 광택제 (polyetylene glycol(PEG) 계열, thiourea 계열, 2-butyne-1,4-diol 등) 농도를 측정하는 법을 제시하였다. 제시된 방법은 CVS 분석 과정에서 구리-염소 사이의 상호 작용으로 인해 생성되는 3가지 stripping peak의 상대적인 크기 변화가 첨가제 농도에 따라 영향을 받는다는 사실에 기반하였다. 본 연구에서는 여기에 관한 원인에 대해 고찰하였으며, 제시된 방법을 통해 광택제 계열 첨가제 농도 측정을 선택적으로 할 수 있다는 것을 증명하였다.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.3 no.2
• /
• pp.92-99
• /
• 1983

Experiment were conducted to study effect of pre-wilting on the quality of silage. Herbage samples were taken on November 11, 1981. Italian ryegrass and rye plant at grazing stage were taken and wilted to adjust their dry matter contents to the range of 15.8 to 53.2% and ensiled in order to evaluate the effect of pre-wilting on the chemical composition and nutrient loss of silage. Both prewilted and unwilted grass material were ensiled in small polyetylene film bag and stored under room temperature. 1. The formation of total acid decreased by increasing DM content, however, lactic acid content of the total organic acid increased. 2. In the silage, the loss of DM declined as DM content increased. 3. The quality of silage estimated by organic acid constituent was improved as DM content in the herbage increased. 4. The production of $NH_3-N$ decreased by increasing degree of prewilting. 5. In vitro dry matter digestibility was not affected by prewilting.