• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.4
• /
• pp.88-97
• /
• 1989

This paper proposes an efficient switch-box router which consists of two parts ; greedy poly-jog router and via minimizer. The greedy switch-box router of Luk, routes not only metal wires at horizontal tracks and poly-silicon wires at vertical tracks but also poly-siliocon wires ar horizontal tracks if necessary. The via minimizer reduces the number of vias and the wire length by fipping of each corner, parallel moving of wire segment, transformation metal into poly-silicon, and transformation poly-silicon into metal. The result is generated through the column-wise scan across the routing region. The expected time complexity is O(M(Nnet)). Where M, N, and Nnet are respectively the number of columns, rows, and nets in the routing region.

• Journal of Sensor Science and Technology
• /
• v.5 no.1
• /
• pp.71-77
• /
• 1996

Considering that polycrystalline silicon, a structural material of the micromachining, is affected by a sacrificial oxide layer, the poly-oxide obtained by the thermal oxidation of polycrystalline silicon is newly proposed and estimated as the sacrificial oxide layer. The grain size of the polycrystalline silicon grown on the poly-oxide is larger than that of poly crystalline silicon grown on the conventional sacrificial oxide layer. As a result of XRD, increase of (111) textures and formation of additional (220) textures are observed on the polycrystaIline silicon deposited on the poly-oxide. Also, the polycrystalline silicon grown on the poly-oxide represents small and uniform stress.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.677-680
• /
• 1999

Rapid developing automation technology enhances the need of sensors. Among many materials, silicon has the advantages of electrical and mechanical property, Single-crystalline silicon has different piezoresistivity on 야fferent directions and a current leakage at elevated temperature, but poly-crystalline silicon has the possibility of controling resistivity using dopping ions, and operation at high temperature, which is grown on insulating layers. Each wafer has slightly different thicknesses that make difficult to obtain the precisely same thickness of a diaphragm. This paper deals with the fabrication process to make poly-crystalline silicon based pressure sensors which includes diaphragm thickness and wet-etching techniques for each layer. Diaphragms of the same thickness can be fabricated consisting of deposited layers by silicon bulk etching. HF etches silicon nitride, HNO$_3$+HF does poly -crystalline silicon at room temperature very fast. Whereas ethylenediamice based etchant is used to etch silicon at 11$0^{\circ}C$ slowly.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.2
• /
• pp.248-253
• /
• 1987

Boron diffusion into silicon through poly\ulcorneri-SiO2 was carried out for the diffusion with low concentration using CVD-BN. The result of direct boron diffusion from BN into silicon and that of boron diffusion through SiO2 from BN into silicon was compared with the result of boron diffusion through poly-Si-SiO2 from BN into silicon. In the case of boron diffusion through poly Si-SiO2, the low concentration diffusion was obtained, that is the boron surface concentration in silicon Cs=10**16 Cm**-3, and the glassy compounds were not seen.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.6
• /
• pp.433-439
• /
• 2011

Poly Si TFTs (poly silicon thin film transistors) with p channel those are annealed HT (high temperature) with gate poly crystalline silicon and LT (low temperature) with metal gate electrode were fabricated on quartz substrate using the analyzed data and compared according to the activated grade silicon thin films and the size of device channel. The electrical characteristics of HT poly-Si TFTs increased those are the on current, electron mobility and decrease threshold voltage by the quality of particles of active thin films annealed at high temperature. But the on/off current ratio reduced by increase of the off current depend on the hot carrier applied to high gate voltage. Even though the size of the particles annealed at low temperature are bigger than HT poly-Si TFTs due to defect in the activated grade poly crystal silicon and the grain boundary, the characteristics of LT poly-Si TFTs were investigated deterioration phenomena those are decrease the electric off current, electron mobility and increase threshold voltage. The results of transconductance show that slope depend on the quality of particles and the amplitude depend on the size of the active silicon particles.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.199-199
• /
• 2008

이 실험은 NVM의 Oxide, Nitride, Oxide nitride층별 blocking, trapping and tunneling 속성에 대해서 밝히고자 한다. gate 전극은 값싸고 전도도가 좋은 알루미늄을 사용한다. 유리기판위에 Silicon nitride층을 20nm로 코팅하고 Silicon dioxide층을 10nm로 코팅한다. 그리고 amorphous Silicon material이 증착된다. Poly Silicon은 Solid Phase Crystallization 방법을 사용하였다. 마지막 공정으로 p-doping은 ion shower에 의한 방법으로 drain과 source 전극을 생성하였다. gate가 biasing 될 때, p-channel은 source와 drain 사이에서 형성된다. Oxide Nitride Oxide nitride (ONO) 층은 각각 12.5nm/20nm/2.3nm의 두께로 만들었다. 전하는 Program process 중에 poly Silicon층에서 Silicon Oxide nitride tunneling층을 통하여 움직이게 된다. 그리고 전하들은 Silicon Nitride층에 머무르게 된다. 그 전하들은 erasing process 중에 trapping 층에서 poly Silicon 층으로 되돌아 간다. Silicon Oxide blocking층은 trapping층으로 전하가 나가는 것을 피하기 위하여 더해진다. 이 논문에서 Programming process와 erasing process의 Id-Vg 특성곡선을 설명한다. Programming process에 positive voltage를 또는 erasing process에 negative voltage를 적용할 때, Id-Vg 특성 곡선은 왼쪽 또는 오른쪽으로 이동한다. 이 실험이 보여준 결과값에 의해서 10년 이상의 저장능력이 있는 메모리를 만들 수 있다. 그러므로, NVM의 중요한 두 가지 성질은 유지성과 내구성이다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.7
• /
• pp.525-531
• /
• 2011

In this paper, experimental analyses have been performed to compare the electrical characteristics of n channel LT(low temperature) and HT(high temperature) poly-Si TFTs(polycrystalline silicon thin film transistors) on quartz substrate according to activated step annealing. The size of the particles step annealed at low temperature are bigger than high temperature poly-Si TFTs and measurements show that the electric characteristics those are transconductance, threshold voltage, electric effective mobility, on and off current of step annealed at LT poly-Si TFTs are high more than HT poly-Si TFT's. Especially we can estimated the defect in the activated grade poly crystalline silicon and the grain boundary of LT poly-Si TFT have more high than HT poly-Si TFT's due to high off electric current. Even though the size of particles of step annealed at low temperature, the electrical characteristics of LT poly-Si TFTs were investigated deterioration phenomena that is decrease on/off current ratio depend on high off current due to defects in active silicon layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.1-4
• /
• 2008

The electrical characteristics of polycrystalline silicon (poly-Si) thin film transistor (TFT) crystallized by excimer laser annealing (ELA) method were evaluated, The polycrystalline silicon thin-film transistor (poly-Si TFT) has higher electric field-effect-mobility and larger drivability than the amorphous silicon TFT. However, to poly-Si TFT's using conventional processes, the temperature must be very high. For this reason, an amorphous silicon film on a buried oxide was crystallized by annealing with a KrF excimer laser (248 nm)to fabricate a poly-Si film at low temperature. Then, High permittivity $HfO_2$ of 20 nm as the gate-insulator was deposited by atomic layer deposition (ALD) to low temperature process. In addition, the solid phase crystallization (SPC) was compared to the ELA method as a crystallization technique of amorphous-silicon film. As a result, the crystallinity and surface roughness of poly-Si crystallized by ELA method was superior to the SPC method. Also, we obtained excellent device characteristics from the Poly-Si TFT fabricated by the ELA crystallization method.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.1 s.10
• /
• pp.23-27
• /
• 2005

This paper presents a simulation methodology for the poly-silicon oriented TCAD(technology-CAD) system. A computer simulation environment for the poly-silicon processing has been set up with the proper adoption of the two-stream model for ion-doping, diffusion, and defects inside of grain and on the grain boundary. After the simulator calibration, simulation results for the poly-silicon diffusion hat shown a good agreement with the SIMS data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.210-217
• /
• 2004

This paper presents a simulation methodology for the poly-silicon oriented TCAD(technology-CAD) system. A computer simulation environment for the poly-silicon processing has been set up with the proper adoption of the two-stream model for ion-doping, diffusion, and defects inside of grain and on the grain boundary. After the simulator calibration, simulation results for the poly-silicon diffusion has showed a good agreement with the SIMS data.