• Proceedings of the Korean Fiber Society Conference
• /
• 2001.04a
• /
• pp.293-296
• /
• 2001

• Proceedings of the Korean Society of Rheology Conference
• /
• 2001.06a
• /
• pp.69-71
• /
• 2001

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.289-296
• /
• 2004

The kinetic parameters, including the activation energy E, the reaction order n, and the pre-exponential factor Z, of the degradation of the copolymers based on the poly(L-lactide) (PLLA) or poly(p-dioxanone-co-L-lactide) (PDO/PLLA) and diol-terminated poly(ethylene glycol) (PEG) segments have been evaluated by the single heating methods of Friedman and Freeman-Carroll. The experimental results showed that copolymers exhibited two degradation steps under nitrogen that can be ascribed to PLLA or PDO/PLLA and PEG segments, respectively. However, copolymers exhibited almost single degradation step in air. Although the values of initial decomposition temperature were scattered, copolymers showed the lower maximum weight loss rate and degradation-activation energy in air than in nitrogen whereas the higher value of temperature at the maximum rate of weight loss was observed in air.

• Clean Technology
• /
• v.12 no.2
• /
• pp.62-66
• /
• 2006

Poly($\small{L}$-Lactide)(PLLA) was prepared by a ring-opening polymerization of $\small{L}$-Lactide with various polydimethylsiloxane(PDMS) based copolymers as a stabilizer in supercritical carbon dioxide($scCO_2$). The block copolymeric stabilizers were synthesized by group transfer polymerization (GTP) by using PDMS macroinitiator. PLLA was found to be produced with fairly low molecular weight distribution as confirmed by gel permeation chromatography(GPC) analysis. Scanning electron microscopy (SEM) results showed that sub-micron size Poly($\small{L}$-lactide)(PLLA) particles were formed by suspension polymerization.

• Macromolecular Research
• /
• v.11 no.6
• /
• pp.511-513
• /
• 2003

Hydroxyl groups were introduced onto the surface of a silicon wafer by O$_2$ plasma treatment. Poly(l-lactide) (1-PLA) was attached onto the surface-modified silicon wafer by the ring-opening polymerization of l-lactide using the hydroxyl group as an initiator. Lamellar single crystals of 1-PLA were grown directly on the 1-PLA-attached silicon wafer from a 0.025% solution in acetonitrile at 5$^{\circ}C$. A well-separated, lozenge-shaped, monolayered lamellar single crystal was prepared because the 1-PLA-attached silicon wafer acts as an initial nucleus.

• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.606-612
• /
• 2013

Glycidol-poly(lactide) (Gly-PLA) were synthesized via L-lactide ring opening polymerization with glycidol as an initiator and $Al(O-i-Pr)_3$ catalyst. The structure of Gly-PLA was analyzed and successfully confirmed by 1H NMR. The OH group of glycidol in Gly-PLA was absent according to the $^1H$ NMR analysis, indicating that the terminal OH group of glycidol successfully served as an initiator in the L-lactide polymerization. The solution and bulk polymerizations of L-lactide with glycidol were performed to examine the effect of L-lactide/glycidol molar ratio, polymerization temperature and time on the molecular characteristics of Gly-PLA. The conversion and molecular weight increased with an increase in L-lactide/glycidol molar ratio. Gly-PLA showed the bimodal type DSC curve. The low $T_m$ peak of low molecular weight reduced but the high $T_m$ peak of high molecular weight increased as L-lactide/glycidol molar ratio increased.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.92-98
• /
• 1998

Poly(DL-lactide-co-glycolide) (80:20) was synthesized from DL-lactide and glycolide, and the copolymers was made to micelles containing clonazepam for drug delivery system. The release experiments of the drug from micelles were operated at pH 7.4 phosphate buffer solution $37.0{\pm}0.05^{\circ}C$. The linearly-releasing time ranges of the drug from micelles prepared with the copolymer/drug weight ratio of 20:40, 20:20, and 40:20 (mg) were 50, 41, and 29 days, respectively. So the linearly-releasing time of drug showed the order of micelles 20/40 > micelles 20/20 > micelles 40/20. In short, the formulation allows polymeric micelles to suppress the burst effect of the drug release mechanism, which led to the controlled release pattern and the possibility of drug delivery system for veinous injection.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.5 s.108
• /
• pp.53-61
• /
• 2004

[ $Poly(_{D}-ldactide)\;(_{D}-PLA)$ ] was synthesized to have low molecular weight for miscible blends with a high molecular $poly(_{L}-lactide)\;(_{L} -PLA)$. The blends were prepared by dissolving the two components of $_{L}-PLA\;and\;_{D}-PLA\;(w/w)$ in chloroform (l00/0, 90/10, 70/30, 50/50, 30/70, 0/100). The miscibility of these miscible blends was characterized by gel-permeation chromatography (GPC), differential scanning calorimetry (DSC), and the selective degradability by enzymes (proteinase K, subtilisin and $\alpha$-chymotrypsin). The coating efficiency of PLA blends onto paper was determined and the degrading activity cellulases by on these blends. The miscibility, coating efficiency and enzymatic degradability of these blends were decreased according to increasing of $_{D}-PLA$ blending part. Such results were attributed to the extent of coating application of PLA, with better miscibility (compatibility), coating efficiency and degradability due to a higher $_{L}-PLA$ content.

• Journal of Environmental Science International
• /
• v.18 no.7
• /
• pp.797-802
• /
• 2009

To control degradation rate of biodegradable poly(lactide)s (PLA), the stereochemical PLAs with different ratios of d-lactide and l-lactide units were synthesized by the ring open polymerization and the their degradation kinetics were measured by a Langmuir film balance. The alkaline (pH=11) degradation of poly(l-lactide) (l-PLA) monolayer showed the faster rate at a surface pressure of 4 mN/m in the ranges from to 0 to 7 mN/m. However, the enzymatic degradation of l-PLA with Proteinase K did not occur until 4 mN/m. Above a constant surface pressure of 4 mN/m, the degradation rate was increased with a constant surface pressure. These behaviors might be attributed to the difference in the contacted area with degradation medium: alkaline ions need small contact area with l-PLA while enzymes require much bigger one to be activated due to different medium sizes. The stereochmical PLA monolayers showed that the alkaline degradation was increased with their optical impurities while the enzymatic one was inversed. These results could be explained by the decrease of crystallinity with the optical impurity and the inactivity of enzyme to d-LA unit.

• Journal of Environmental Science International
• /
• v.15 no.2
• /
• pp.177-183
• /
• 2006

The hydrolytic kinetics of biodegradable poly(l-lactide) (PLLA) have been studied by using two model systems, solution-grown single crystal (SC) and Langmuir monolayer techniques, for elucidating the mechanism for both alkaline and enzymatic degradations. The present study investigated the parameters such as degradation medium and time. The Langmuir mono layers of PLLA showed faster rates of hydrolysis when they were exposed to a basic subphase rather than they did when exposed to neutral subphase. Both degradation mediums had moderate concentrations to show a maximized activity, depending on their sizes. An alkaline degradation of SCs of PLLA showed the decrease of molecular weight of the remained crystals due to the erosion of chain-folding surface. However, the enzymatic degradation of SCs of PLLA occurred in the crystal edges thus the molecular weight of remained crystals was not changed. This behavior might be attributed to the size of enzymes which is much larger than that of alkaline ions; that is, the enzymes need larger contact area with monolayers to be activated.