• Title/Summary/Keyword: poly(A)

Search Result 6,370, Processing Time 0.036 seconds

Effect of Poly(vinyl alcohol) on the Thermally Induced Conformational Change of Poly(D-Glutamic acid)

  • Cho Chong-Su
    • Bulletin of the Korean Chemical Society
    • /
    • v.3 no.2
    • /
    • pp.60-66
    • /
    • 1982
  • In relation to denaturation of proteins, thermally induced conformational change of poly(D-glutamic acid) was studied in the presence of poly(vinyl alcohol) at low pH, where poly(D-glutamic acid) undergoes a helix-to-${\beta}$ transition without any other polymer. In a dilute solution, poly(vinyl alcohol) enhanced the ${\alpah}-to-{\beta}_1$ transition of poly(D-glutamic acid) due to intermolecular interaction between the two polymers. On the other hand, this conformational change was interrupted to a large extent in a concentrated solution, due to the interpenetration of poly(vinyl alcohol) chain into poly(D-glutamic acid) chain which prevented the intramolecular association of poly(D-glutamic acid) chain. A conformational change from ${\beta}_1\;to\;{\beta}_2$ of poly(D-glutamic acid) was observed for the films obtained by casting during annealing the mixture solutions. The ${\beta}_2$ content in the cast film increased with increasing poly(vinyl alcohol) content in the mixture.

Emitting characteristics with alkyl side chain introduced at poly(3-alkylthiophene) electroluminescent devices (Poly(3-alkylthiophene) 전계발광소자에 도입된 alkyl side chain의 길이에 따른 발광특성)

  • Seo, Bu-Wan;Kim, Ju-Seung;Gu, Hal-Bon
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2000.04b
    • /
    • pp.143-146
    • /
    • 2000
  • We studied effects of alkyl($C_nH_{2n+1}$) chain length on characteristics of poly(3-alkylthiophene) electroluminescent diodes. Among the poly(3-alkylthiophene), poly(3-hexylthiophene)(n=6) and poly(3- octyIthiophene)(n=8) were mainly used for the emitting layer of the diode. The result of experiment, the emission intensity of poly(3-alkylthiophene) electroluminescent diodes depends on the alkyl chain length. Strong emission is obtained from a poly(3-alkylthiophene) diodes of long alkyl side chain length. Emission intensities are enhanced by a confinement of carriers on a main chain with a long interchain distance caused by a long alkyl side chain.

  • PDF

pH Effect on Relaxation Spectra of Poly(methyl acrylate)-Poly(acrylonitrile) Copolymers by REM Model (REM 모델에 의한 Poly(methyl acrylate)-Poly(acrylonitrile) 공중합체 완화스펙트럼의 pH 영향)

  • Kim, Nam Jeong
    • Polymer(Korea)
    • /
    • v.37 no.2
    • /
    • pp.135-140
    • /
    • 2013
  • The stress relaxation of poly(methyl acrylate)-poly(acrylonitrile) copolymer samples was carried out in air, distilled water, pH 3, 7 and 11 solutions at various temperatures using a tensile tester equipped with a solvent chamber. The relaxation spectra of poly(methyl acrylate)-poly(acrylonitrile) copolymers were obtained by applying the experimental stress relaxation curves to the equation of relaxation spectrum derived from the Ree-Eyring and Maxwell model. The determination of relaxation spectra was performed from computer calculation using a Laplace transform method. It was observed that the relaxation spectra of these samples are directly related to the distribution of molecular weights and self-diffusions of flow segments.

Electropolymerized Thin Bilayers of Poly-5-amino-1-naphthol and Poly-1,3-phenylendiamine for Continuous Monitoring Glucose Sensors

  • Chung, Taek-Dong
    • Bulletin of the Korean Chemical Society
    • /
    • v.24 no.3
    • /
    • pp.291-294
    • /
    • 2003
  • A highly interferent-resistive membrane, poly-5-amino-1-naphthol (poly-5A1N), underlied beneath enzymeembedded poly-1,3-phenylendiamine (poly-m-PD) network for miniturized continuous monitoring glucose sensors. The enzyme layer was prepared from a mixed solution of glucose oxidase (GOx) and m-PD monomer by simple electrolysis. The mass change of poly-5A1N was monitored by electrochemical quartz crystal microbalance (EQCM) in situ and the corresponding thickness was measured. Successive electropolymerization of poly-5A1N and poly-m-PD create a several tens nm-thick bilayer showing excellent selectivity for $H_2O_2$ and low activity loss of immobilized enzymes.

Programming characteristics of single-poly EEPROM (Single-poly EEPROM 의 프로그램 특성)

  • 한재천;나기열;이성철;김영석
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.33A no.2
    • /
    • pp.131-139
    • /
    • 1996
  • Inthis apper wa analyzed the channel-hot-electron programming characteristics of the single-poly EEPROM with different control gate and drain structures. The single-poly EEPROM uses the p$^{+}$/n$^{+}$-diffusion in the n-well as a control gate instead of the second poly-silicon. The program and erase characteristics of the single-poly EEPROM were verified using the two-dimensional device simulator, MEDICI. The single-poly EEPROM was fabricated using 0.8$\mu$m ASIC CMOS process, and its CHE programming characteristics were measured using HP4155 parameteric analyzer and HP8110 pulse gnerator. Especially we investigated the CHE programming characteristics of the single-poly EEPROM with the p$^{+}$-diffusion or n$^{+}$-diffusion in the n-well as a control gate and the LDD or single-drain structure. The single-poly EEPROM with p$^{+}$-diffusion in the n-well as a control gate and single-drain structure was programmed to about VT$\thickapprox$5V with VDS=6V, VCG=12V(1ms pulse width).th).

  • PDF

Effect of Ethidium on the Formation of Poly(dA)·[poly(dt)]₂Triplex: A Kinetic Study by Optical Spectroscopic Methods

  • 이길준;현경미;조태섭;Kim, Seog K.;정맹준;한상욱
    • Bulletin of the Korean Chemical Society
    • /
    • v.19 no.4
    • /
    • pp.444-449
    • /
    • 1998
  • The kinetics of the formation of triplex $poly(dA){\cdot}[poly(dT)]_2$ from poly(dA)·poly(dT) and poly(dT) is examined by various optical spectroscopic methods, including absorption, circular and linear dichroism (LD) spectroscopy. In the pseudo first order condition, where the poly(dT) concentration is kept lower than that of duplex, the association of the poly(dT) is enhanced by the presence of ethidium; the rate constant is proportional to the amount of ethidium in the mixture. When the concentration of the duplex and the single strand is the same, a spectral change is explained by double exponential curves, indicating that at least two steps are involved, the fast association and slow rearrangement steps. In contrast to the pseudo first order kinetics, the association step in an equimolar condition is not affected by the presence of ethidium. In the rearrangement step, the magnitude of LD decreases with an increase in ethidium concentration, suggesting that the bending of polynucleotide around the intercalation site occurs in the rearrangement step.

Dispersion Polymerization of Acrylate Monomers in Supercritical $CO_2$ using GMA-functionalized Reactive Surfactant (초임계 이산화탄소에서 Glycidyl methacrylate 반응성 계면활성제를 이용한 아크릴레이트의 분산중합)

  • Park, Kyung-Kyu;Kang, Chang-Min;Lee, Sang-Ho
    • Elastomers and Composites
    • /
    • v.45 no.4
    • /
    • pp.256-262
    • /
    • 2010
  • Dispersion polymerization of methyl acrylate, ethyl acrylate, butyl acrylate, and glycidyl methacrylate were performed in supercritical $CO_2$ at $80\;^{\circ}C$ and 346 bar. Glycidyl methacrylate linked poly(dimethylsiloxane) (GMS-PDMS) surfactant, which was prepared by linking glycidyl methacrylate to monoglycidyl ether terminated PDMS with amino-propyltriethoxysilane, was used as surfactant for the dispersion polymerization in $CO_2$. The yield of the poly(alkyl acrylate) polymers, synthesized in $CO_2$ medium, decreased as the alkyl tail of the acrylate monomers increased. Poly(glycidyl methacrylate) and poly(methyl acrylate) were produced in bead form whereas poly(ethyl acrylate) and poly(butyl acrylate) were viscous liquid. The poly(glycidyl methacrylate) particles had a number average diameter of 2.45 ${\mu}m$ and monodisperse distribution. The poly(methyl acrylate) had a number average diameter of 0.52 ${\mu}m$ and the particle size distribution was bimodal. The glass transition temperatures ($T_g$) of the poly(glycidyl methacrylate) and the poly(alkyl acrylate) products were 4~9 K higher than the $T_g$ of the corresponding acrylate polymers synthesized in conventional processes.

Conformation of Single Stranded Poly(dA) and Its Interaction with 4',6-Diamidino-2-phenylindole

  • 정갑선;김명순;이길준;조태섭;Kim, Seog K.;이세윤
    • Bulletin of the Korean Chemical Society
    • /
    • v.18 no.5
    • /
    • pp.510-514
    • /
    • 1997
  • We studied the interaction of 4',6-diamidino-2-phenylindole (DAPI) with single stranded poly(dA) using optical spectroscopic methods, including absorption, circular dichroism (CD), and fluorescence spectroscopy. The temperature-dependent conformation of poly(dA) was also investigated. The conformation of poly(dA) varied with temperature, which is explained by the stacking-destacking process of the adenine bases, resulting from the sugar conformation. The hypochromicity and red-shift in the absorption spectroscopy, the lack of CD change in the drag absorption region, and the fluorescence behavior, especially a great accessibility of the I2 quencher to the poly(dA)-bound DAPI, suggest that DAPI binds to the outside of poly(dA). The Job plot for the DAPI-poly(dA) mixture demonstrated that a stoichiometry of one DAPI molecule binds to the one phosphate of poly(dA).

Catalytic properties of wheat phytase that favorably degrades long-chain inorganic polyphosphate

  • An, Jeongmin;Cho, Jaiesoon
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.33 no.1
    • /
    • pp.127-131
    • /
    • 2020
  • Objective: This study was conducted to determine catalytic properties of wheat phytase with exopolyphosphatase activity toward medium-chain and long-chain inorganic polyphosphate (polyP) substrates for comparative purpose. Methods: Exopolyphosphatase assay of wheat phytase toward polyP75 (medium-chain polyP with average 75 phosphate residues) and polyP1150 (long-chain polyP with average 1150 phosphate residues) was performed at pH 5.2 and pH 7.5. Its activity toward these substrates was investigated in the presence of Mg2+, Ni2+, Co2+, Mn2+, or ethylenediaminetetraacetic acid (EDTA). Michaelis constant (Km) and maximum reaction velocity (Vmax) were determined from Lineweaver-Burk plot with polyP75 or polyP1150. Monophosphate esterase activity toward p-nitrophenyl phosphate (pNPP) was assayed in the presence of polyP75 or polyP1150. Results: Wheat phytase dephosphorylated polyP75 and polyP1150 at pH 7.5 more effectively than that at pH 5.2. Its exopolyphosphatase activity toward polyP75 at pH 5.2 was 1.4-fold higher than that toward polyP1150 whereas its activity toward polyP75 at pH 7.5 was 1.4-fold lower than that toward polyP1150. Regarding enzyme kinetics, Km for polyP75 was 1.4-fold lower than that for polyP1150 while Vmax for polyP1150 was 2-fold higher than that for polyP75. The presence of Mg2+, Ni2+, Co2+, Mn2+, or EDTA (1 or 5 mM) exhibited no inhibitory effect on its activity toward polyP75. Its activity toward polyP1150 was inhibited by 1 mM of Ni2+ or Co2+ and 5 mM of Ni2+, Co2+, or Mg2+. Ni2+ inhibited its activity toward polyP1150 the most strongly among tested additives. Both polyP75 and polyP1150 inhibited the monophosphate esterase activity of wheat phytase toward pNPP in a dose-dependent manner. Conclusion: Wheat phytase with an unexpected exopolyphosphatase activity has potential as a therapeutic tool and a next-generational feed additive for controlling long-chain polyP-induced inappropriate inflammation from Campylobacter jejuni and Salmonella typhimurium infection in public health and animal husbandry.

Surfactant-free microspheres of poly($\alpha$-caprolactone)/poly(ethylene glycol)/poly($\varepsilon$-caprolactone) triblock copolymers as a novel protein carriers

  • Sun, Sang-Wook;Jeong, Young-Il;Jung, Sun-Woong;Kim, Sung-Ho
    • Proceedings of the PSK Conference
    • /
    • 2002.10a
    • /
    • pp.408.2-409
    • /
    • 2002
  • The aim of this study is to prepare biodegradable microspheres without use of any kind of surfactants or emulsifiers for a novel sustained delivery carriers of protein drugs. Poly(e-caprolactone)/poly(ethylene glycol)/poly(e-caprolactone) (CEC) triblock copolymer was synthesized by ring-opening of e-caprolactone with dihydroxy poly(ethylene glycol) and was used to make surfactant-free microspheres. (omitted)

  • PDF