• Korean Chemical Engineering Research
• /
• v.62 no.3
• /
• pp.269-273
• /
• 2024

The normal stress of TiO₂ ER fluid under an electric field showed negative values due to the electrostatic attraction force in the normal direction between particles and the absolute value increased dramatically with electric field strengths. The normal yield stress exhibited E² dependence similar to the dynamic yield stress, indicating that normal stress can be utilized for evaluating the ER effect. Numerical simulation demonstrated good qualitative agreement with the experimental data and suggested that the decrease in the absolute value of normal stress with increasing shear rates was attributed to the rearrangement of particle configurations under shear.

• Corrosion Science and Technology
• /
• v.12 no.1
• /
• pp.40-49
• /
• 2013

Effects of magnesium and pH on corrosion of aluminum galvanically coupled to iron have studied by using potentio- dynamic and static tests for polarization curves, Mott-Schottky test for analysis of semiconductor property, and GD-AES and XPS for film analysis. Pitting potential was sensitive to magnesium as an alloying element but not to pH, while passive current was sensitive to pH but not to magnesium. It was explained with, instead of point defect model (PDM), surface charge model describing that the ingression of chloride depends on the state of surface charge and passive film at film/solution interface is affected by pH. In addition, galvanic current of aluminum electrically coupled to iron was not affected by magnesium in pH 8.4, 0.2M citrate solution but was increased by magnesium at the solution of pH 9.1. The galvanic current at pH 9.1 increased with time at the initial stage and after the exposure of about 200 minute, decreased and stabilized. The behavior of the galvanic current was related with the concentration of magnesium at the surface. It agreed with the depletion of magnesium at the oxide surface by using glow discharge atomic emission spectroscopy (GD-AES). In addition, pitting potential of pure aluminum was reduced in neutral pH solution where chloride ion maybe are competitively adsorbed on pure aluminum. It was confirmed by the exponential decrease of pitting potential with log of [$Cl^-$] around 0.025 M of [$Cl^-$] and linear decrease of the pitting potential. From the above results, unlike magnesium, alloying elements with higher electron negativity, lowering isoelectric point (ISE), are recommended to be added to improve pitting corrosion resistance of aluminum and its alloys in neutral solutions as well as their galvanic corrosion resistance in weakly basic solutions.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.305-311
• /
• 2006

We propose a 7-level atom model, which takes into account two-photon coherence effects in saturation absorption spectroscopy. Using this model we explained spectral change with laser intensity and some of crossover resonance lines, which cannot be explained with Nakayama theory. The 7-level model consists of two upper levels and five lower levels, which account for $\pi-\pi$ polarization of both pump and probe beams in Zeeman sub levels. We compared our 7-level model with 4-level Nakayama theory for 5S$_{1/2}$ - 5P$_{1/2}$ transition line in $^{85}$Rb atoms. The results of the 7-level model calculation agree well the saturation absorption spectra data according to laser intensities.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.67-67
• /
• 2001

The structure zone model has been used to provide an overview of the relationship between the microstructure of the films deposited by PVD and the most prominent deposition condition.s. B.AMovchan and AV.Demchishin have proposed it firstls such model. They concluded that the general features of the resulting structures could be correlated into three zones depending on $T/T_m$. Here T m is the melting point of the coating material and T is the substrate temperature in kelvines. Zone 1 ($T/Tm_) is dominated by tapered macrograins with domed tops, zone 2 ($O.3) by columnar grains with denser boundaries and zone 3 ($T/T_m>O.5$) by equiaxed grains formed by recrystallization. J.AThomton has extended this model to include the effect of the sputtering gas pressure and found a fourth zone termed zone T(transition zone) consisting of a dense array of poorly defined fibrous grains. R.Messier found that the zone I-T boundary (fourth zone of Thorton) varies in a fashion similar to the film bias potential as a function of gas pressure. However, there has not nearly enough model for explaining the change in morphology with crystal orientation of the films. The structure zone model only provide an information about the morphology of the deposited film. In general, the nucleation and growth mechanism for granular and fine structure of the deposited films are very complex in an PVD technique because the morphology and orientation depend not only on the substrate temperature but also on the energy of deposition of the atoms or ions, the kinetic mechanism between metal atoms and argon or nitrogen gas, and even on the presence of impurities. In order to clarify these relationship, AI and Mg thin films were prepared on SPCC steel substrates by PVD techniques. The influence of gas pressures and bias voltages on their crystal orientation and morphology of the prepared films were investigated by SEM and XRD, respectively. And the effect of crystal orientation and morphology of the prepared films on corrosion resistance was estimated by measuring polarization curves in 3% NaCI solution.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.2
• /
• pp.68-78
• /
• 2019

Recently, housing prices have surged, and the government has implemented various regulations, such as finance and taxes. Because of the policy, the nationwide housing price have stabilized, but polarization has occurred. Some argue that regulation can adversely affect the actual demand. Therefore, not only the correlation between market variables but also ripple effect of policy has to be analyzed in policy planning and analysis from a microscopic point of view. In this study, a simulation model was developed by integrating system dynamics for analyzing market structure and agent-based model for modeling decision process of market participants. This research applied the financial regulation and the tax regulation to the model and evaluated the policy effectiveness. This study reveals which feedback dominates according to the policies, which have same purpose. It is because market participants make different decision for each policy. Furthermore, there were other ripple effects not only in the policy target submarket but also in other submarket.

• Journal of Applied Reliability
• /
• v.18 no.3
• /
• pp.271-279
• /
• 2018

Purpose: Probabilistic safety analysis was performed to enhance the safety and reliability of nuclear power plants because traditional deterministic approach has limitations in predicting the risk of failure by crack growth. The study introduces a probabilistic approach to establish a basis for probabilistic safety assessment of passive components. Methods: For probabilistic modeling of fatigue crack growth rate (FCGR), various FCGR tests were performed either under constant load amplitude or constant ${\Delta}K$ conditions by using heat treated X-750 at low temperature with adequate cathodic polarization. Bayesian inference was employed to update uncertainties of the FCGR model using additional information obtained from constant ${\Delta}K$ tests. Results: Four steps of Bayesian parameter updating were performed using constant ${\Delta}K$ test results. The standard deviation of the final posterior distribution was decreased by a factor of 10 comparing with that of the prior distribution. Conclusion: The method for developing a probabilistic crack growth model has been designed and demonstrated, in the paper. Alloy X-750 has been used for corrosion fatigue crack growth experiments and modeling. The uncertainties of parameters in the FCGR model were successfully reduced using the Bayesian inference whenever the updating was performed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.476-482
• /
• 2014

In this study, we analyzed the effect of corn growth on the radar backscattering coefficient. At first, we measured the backscattering coefficients of various corn fields using a polarimetric scatterometer system. The backscattering coefficients of the corn fields were also computed using the 1st-order VRT(Vector Radiative Transfer) model with field-measured input parameters. Then, we analyzed the experimental and numerical backscattering coefficients of corn fields. As a result, we found that the backscatter from an underlying soil layer is dominant for early growing stage. On the other hand, for vegetative stage with a higher LAI(Leaf-Area-Index), the backscatter from vegetation canopy becomes dominant, and its backscattering coefficients increase as incidence angle increases because of the effect of leaf angle distribution. It was also found that the estimated backscattering coefficients agree quite well with the field-measured radar backscattering coefficients with an RMSE(Root Mean Square Error) of 1.32 dB for VV-polarization and 0.99 dB for HH-polarization. Finally, we compared the backscattering characteristics of vegetation and soil layers with various LAI values.

• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.13-23
• /
• 2013

Purpose - There is a dominant opinion that medium and small enterprises in the Korean economy have not developed qualitatively but only towards quantitative growth and, therefore, the unbalanced structure between large enterprises and those that are medium and small has worsened. In particular, this rapid industrialization causes after-effects such as polarization as well as anti-business sentiment, the collapse of the middle class, and hostility against the establishment. The consensus contends that it is difficult for Korea to be an advanced nation without resolving these problems. This paper attempts to suggest a co-prosperity model by limiting the focus to business relations with medium and small manufacturers (with regard to investment among the various co-prosperity institutions of POSCO). These co-prosperity institutions have been established in POSCO; however, it is thought that the development of a co-prosperity model regarding investment in medium and small manufacturers will help many needy investment manufacturers. Research design, data, and methodology - This study analyzes research on the co-prosperity model, using it to examine Korean cases and foreign cases. The co-prosperity model has been continuously extended but is determined to be seriously insufficient. The purpose of this study is to develop the Korean co-prosperity model by reinterpreting it in various aspects. In order to develop the Korean co-prosperity model, this study suggests the case of the establishment of the co-prosperity model by POSCO with medium and small manufacturers with regard to investment. This model is expected to be presented to many enterprises as the future co-prosperity model. Results - To date, analysis of the co-prosperity model itself and the co-prosperity model through the case of POSCO have been suggested. As empirical studies on co-prosperity in Korea are not sufficient, successful models of co-prosperity should be developed in various aspects in future. It is expected that through this study, medium and small manufacturers would have an opportunity to find various growth engines by actively using the cooperation platform and establishing optimized competitiveness of steel material through a steel business model. The ecosystem of enterprises may evolve and be healthier by making more joint products through productive business relationships between large enterprises and those that are medium and small. From the enterprises' ecosystem viewpoint, cooperation between such businesses rather than one-way support is identified as an essential element for the security of inter-competitiveness. Conclusions - Infrastructure should be established to form a dynamic industry ecosystem not by transient efforts in co-prosperity, but by an entire culture of co-prosperity across industries. In this respect, the leading role of public institutions needs to be intensified initially. In addition, the effects of co-prosperity should be extended to blind spots of policies such as third party companies and regions. A precise co-prosperity monitoring system should be established to continuously conduct and extend these efforts.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.61-66
• /
• 2012

Chemical Mechanical Planarization (CMP) is a polishing process used in the microelectronic fabrication industries to achieve a globally planar wafer surface for the manufacturing of integrated circuits. Pad conditioning plays an important role in the CMP process to maintain a material removal rate (MRR) and its uniformity. For metal CMP process, highly acidic slurry containing strong oxidizer is being used. It would affect the conditioner surface which normally made of metal such as Nickel and its alloy. If conditioner surface is corroded, diamonds on the conditioner surface would be fallen out from the surface. Because of this phenomenon, not only life time of conditioners is decreased, but also more scratches are generated. To protect the conditioners from corrosion, thin organic film deposition on the metal surface is suggested without requiring current conditioner manufacturing process. To prepare the anti-corrosion film on metal conditioner surface, vapor SAM (self-assembled monolayer) and FC (Fluorocarbon) -CVD (SRN-504, Sorona, Korea) films were prepared on both nickel and nickel alloy surfaces. Vapor SAM method was used for SAM deposition using both Dodecanethiol (DT) and Perfluoroctyltrichloro silane (FOTS). FC films were prepared in different thickness of 10 nm, 50 nm and 100 nm on conditioner surfaces. Electrochemical analysis such as potentiodynamic polarization and impedance, and contact angle measurements were carried out to evaluate the coating characteristics. Impedance data was analyzed by an electrical equivalent circuit model. The observed contact angle is higher than 90o after thin film deposition, which confirms that the coatings deposited on the surfaces are densely packed. The results of potentiodynamic polarization and the impedance show that modified surfaces have better performance than bare metal surfaces which could be applied to increase the life time and reliability of conditioner during W CMP.

• Membrane and Water Treatment
• /
• v.9 no.5
• /
• pp.373-383
• /
• 2018

Fouling by solids and microorganisms is the major obstacle limiting the efficient use of membrane wastewater treatment. In our previous study, two stages microalgae/membrane filtration system was proposed to treat anaerobic digested palm oil mill effluent (AnPOME). This two stages microalgae/membrane filtration system had showed great potential for the treatment of AnPOME with high removal of COD, $NH_3-N$, $PO_4{^{3-}}$, TSS, turbidity, and colour. However, fouling behavior of the membrane in this two stages microalgae/membrane filtration system was still unknown. In this study, empirical models that describe permeate flux decline for dead-end filtration (pore blocking - complete, intermediate, and standard; and cake layer formation) presented by Hermia were used to fit the experimental results in identifying the fouling mechanism under different experimental conditions. Both centrifuged and non-centrifuged samples were taken from the medium with 3 days RT intervals, from day 0 to day 12 to study their influence on fouling mechanisms described by Hermia for ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO) filtration mode. Besides, a more detailed study on the use of resistance-in-series model for deadend filtration was done to investigate the fouling mechanisms involved in membrane filtration of AnPOME collected after microalgae treatment. The results showed that fouling of UF and NF membrane was mainly caused by cake layer formation and it was also supported by the analysis for resistance-in-series model. Whereas, fouling of RO membrane was dominated by concentration polarization.