• Journal of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.85-89
• /
• 1991

Various sterols and uncommon fatty acids have been isolated from the three species of Korean marine sponges. Odd-numbered pentadecanoic, heptadecanoic methyl ester and branched 12-methyltetradecanoic, 14-methylpentadecanoic, 15-methylhexadecanoic and 14-methylhexadecanoic methyl ester were isolated along with common tetradecanoic and hexadecanoic methyl ester from Heteropiidae sponge Vosmaeropsis japonica Hozawa collected from Sohuksan island of the Korea sea. Futher elution with more polar solvent gave 5${\alpha}$-cholestan-3${\beta}$-ol along with minor amount of ergost-25-ene-3${\beta}$,5${\alpha}$,6${\beta}$-triol. On the other hand, marine sponge Hymeniacidon sinapium collected from Yesu Dolsan island of the Korea sea was shown to contain 5${\alpha}$-cholestan-3${\beta}$-ol, along with minor amount of cholesterol, palmitic, palmitoleic, oleic, stearic, linolenic, and arachidonic acid ethyl ester. Unknown marin sponge collected from the same region was shown to contain large amount of tetradecanoic tetradecyl and hexadecyl ester and cholesteryl acetic and fatty acid ester.

• Korean Journal of Food Science and Technology
• /
• v.42 no.6
• /
• pp.755-761
• /
• 2010

The quinone reductase (QR) inducing activities of mung bean and soybean solvent extracts were compared using murine hepatoma cells (Hepa 1c1c7). The mung bean extracts (ethylacetate and ethanol) showed higher chemoprevention index values (7.88-8.22) than those of soybean extracts (2.9-5.2) from four different cultivars. The mung bean extracts also had significantly higher inhibitory effects (47-62% at 100 ${\mu}g$/mL) than the soybean extracts (15-42% at 100 ${\mu}g$/mL) against the production of nitric oxide and prostaglandin E2 in lipopolysccharide stimulated macrophage RAW264.7 cells without cytotoxicity. Among seven recovered fractions of mung bean ethanol extract obtained by C 18 silica flash column chromatography, the most non-polar fraction exhibited the highest chemoprevention index of 10.4.

• Ocean and Polar Research
• /
• v.43 no.3
• /
• pp.113-126
• /
• 2021

In the present study, the halophyte C. falcatum extract and its solvent fractions (n-hexane, 85% aqueous methanol, n-butanol, and water) were evaluated for antioxidant and anti-inflammatory activities. Antioxidative ability was measured by DPPH radical, intracellular reactive oxygen species (ROS) and peroxynitrite scavenging, DNA oxidation inhibition, and ferric reducing antioxidant power (FRAP). For DPPH radical and peroxynitrite scavenging, DNA oxidation inhibition, and FRAP, 85% aq.MeOH and n-BuOH fractions showed significant scavenging activity. For production of intracellular ROS in HT-1080 cells, 85% aq.MeOH fraction showed the highest scavenging activity. In addition, anti-inflammatory activity was also assessed by measuring the inhibitory effect against mRNA expression of pro-inflammatory factors (NO, IL-1β, IL-6 and COX-2) in LPS-stimulated Raw 264.7 macrophages. For NO production, crude extract exhibited a strong inhibitory effect at a concentration of 100 ㎍/ml. For mRNA expression of pro-inflammatory cytokines (IL-1β, IL-6, and COX-2), n-BuOH greatly suppressed expression levels of IL-1β and IL-6 at 100 ㎍/ml concentration while 85% aq. MeOH fraction significantly inhibited that of COX-2 even at 100 ㎍/ml. These results suggest that C. falcatum may be used as a potential source for the development of a natural antioxidant or anti-inflammatory agent.

• Current Photovoltaic Research
• /
• v.10 no.4
• /
• pp.101-106
• /
• 2022

We prepared a CsPbI₂Br solution using Cesium iodide (CsI), Lead (II) bromide (PbBr₂) and Lead (II) iodide (PbI₂) materials into a polar solvent mixture of N,N-dimethylformamide (DMF) and Dimethyl sulfoxide (DMSO). A simple spin coating technique was used for the fabrication of CsPbI₂Br absorber layer in the solution process. In order to prepare uniform coating of absorber film we adopted a hot-air process in assocation with the spin coating. It was confirmed that the thin film manufactured by the hot-air process had a higher absorption rate than that without it, and the optical band gap was measured 1.93 eV. The thin film of absorber was uniformly prepared and revealed the Black α-Cubic crystal phase as proved through X-ray diffraction analysis. Finally, a perovskite solar cell having an n-i-p structure was manufactured with a CsPbI₂Br perovskite absorption layer. From the solar cell, we obtained a power conversion efficiency (PCE) of 5.97% in a forward measurement.

• Analytical Science and Technology
• /
• v.35 no.6
• /
• pp.229-236
• /
• 2022

Lipidomic analyses of transient breast milk are far more limited than those of other dairy products. As a preliminary analysis of breast milk lipidomes, analytical methods for polar and nonpolar lipids from transient breast milk were developed, and detailed fatty acid profiles were determined in this study. The newly developed methods include solvent fractionation of phospholipids and acyl glycerol, one-pot derivatization to FAMEs and pyridylcarbinol esters, and instrumental analysis, including GC-FID and GC-MS. The results indicate that breast milk contains 16 major common fatty acids with 8-22 carbons. Additionally, 29 minor fatty acids were identified, including odd-numbered fatty acids and branched analogues with 11-23 carbons. Their detailed concentrations in different fractions were measured using the internal standard method. In addition to ordinary fatty acids, breast milk contains several branched fatty acids, including iso/anteiso acids with 15-18 carbons. Structural studies have been performed on selected minor fatty acids via chemical synthesis.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.609-614
• /
• 2013

This study investigated the spontaneous combustion behavior of solvent-treated low rank coals. Indonesian lignite (a KBB and SM coal) and sub-bituminous (a Roto coal) were mixed with non-polar 1-methyl naphthalene (1MN) either by mechanical agitation or ultrasonication. The property change associated with 1MN treatment was then analyzed using proximate analysis, calorific value analysis, Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy and moisture re-adsorption test. Susceptibility to spontaneous combustion was evaluated using crossingpoint temperature (CPT) measurement along with gas analysis by GC. A FT-IR profile showed that oxygen functional groups and C-H bonding became weaker when treated by 1 MN. XPS results also indicated a decrease of the oxygen groups (C-O-, C=O and COO-). Increased hydrophobicity was found in the 1MN treated coals during moisture readsorption test. A CPT of the treated coals was ${\sim}20^{\circ}C$ higher than that of the corresponding raw coals and the ultrasonication was more effective way to enhance the stability against spontaneous combustion than the agitation. In the gas analysis less CO and $CO_2$ were emitted from 1MN treated coals, also indicating inhibition of pyrophoric behavior. The surface functional groups participating in the oxidation reaction seemed to be removed by the ultrasonication more effectively than by the simple mechanical agitation.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.528-534
• /
• 2011

This study was conducted to investigate the changes in saponin content and antioxidant activity of crude ginseng and extruded ginseng by using different solvent extraction methods. Each of the fractions was first extracted by 80% ethanol followed by ether treatment to remove the lipid components. Water soluble components were separated by ethylacetate and water saturated butanol. Four fraction, including 80% ethanol, ethylacetate, butanol and water were obtained from crude and extruded ginsengs to analyze saponin content and antioxidant activity. Saponin content and antioxidant capacity of each of the four fractions were measured by LC/MS analysis and ORAC(Oxygen Radical Absorbance Capacity) assay, respectively. It was found that a major portion of saponin was present in ethyl acetate and water saturated butanol fractions. When extracted by 80% ethanol, ginsenoside Rb1 and Rg1 were mostly found in crude ginseng, while ginsenoside Re and Rb1 were detected in extruded ginseng. Even though Rh1 and Rg3 were found in a very small quantity in crude ginseng, there was a significant quantity of both in extruded ginseng when extracted by 80% ethanol. Similar tendency was also observed in extruded ginseng fraction when extracted with ethyl acetate and butanol. In crude ginseng, the level of Rg1 was the highest among other ginsenosides upon extraction by ethyl acetate, while Rh1 and Rg3 were predominantly found by employing similar solvent extraction in the extruded ginseng. Also, Rg1, Re and Rb1 were also found in the extruded ginseng with small quantity. Rg1, Re and Rb1 were found in crude ginseng by butanol extraction, while Rb1 and Re were extracted from the extruded ginseng. Overall, there was no difference in the saponin content between crude ginseng and extruded ginseng when extracted by butanol and water, but twice as much of saponin was obtained by 80% ethanol extraction and 6 times more saponin were obtained in ethyl acetate fraction in the extruded ginseng. Antioxidant capacity of crude ginseng as determined by ORAC assay was higher in 80% ethanol(high in many different kinds of biological compounds) and water saturated butanol(high in polar saponin) fractions than the ethyl acetate and water fractions. No difference in antioxidant capacity was observed between crude and extruded ginseng. However, antioxidant capacity of ethyl acetate and water fractions in extruded ginseng was significantly higher than crude ginseng($P$ >0.05). All the fractions in both, crude and extruded ginseng possessed antioxidant capacity and even water fractions that contained almost no saponin had some antioxidant capacity. While determining correlation coefficient between fractions in extruded ginseng by Pearson correlation, it was observed that 80% ethanol fraction was in correlation with ethyl acetate($P$ >0.01) and ethanol($P$ >0.001) and in the case of ethylacetate, correlation was observed only with butanol fraction($P$ >0.05).

• Analytical Science and Technology
• /
• v.6 no.5
• /
• pp.521-530
• /
• 1993

According to the Montreal Protocol, CFC 113, one of the ozone-depleting substances, will be prohibited to use as a cleaning solvent essentially in the electronic industry. Therefore, the development of the alternative cleaning solvents to CFC 113 is being accelerated. A number of the alternative cleaning solvents are avialable on the market. The alternatives of Axarel 32(DuPont), Cleanthru 750H(KAO Chemical), and EC-Ultra(Petroferm) are chosen for the comparison of cleaning performance with CFC 113. The test methods for measuring the cleaning performance were composed of the measurement of the physical properties, the experiments on the material compatibility with cleaning solvents, the measurement of the evaporation rate, and finally the experiments of the removal efficiency. Normally the basic physical properties of the alternatives had higher boiling points, viscosity and surface tension, which were quite different to those of CFC 113. In terms of solubility of rosin-based flux, the solubilities of abietic acid (nonpolar organic) were similar, but those of the activator (polar organic) in the alternatives were better than CFC 113. The evaporation of the alternatives was very slow, compared to CFC 113, which had much lower boiling point. All the cleaning solvents showed the good material compatibility with FR4 and Cu-coated PCB. The better removal efficiencies of abietic acid were obtained when using the ultrasonic mechanical energy over the dipping method. The experiments also indicated the very slow-eavaporating solvent was not desirable with the dipping cleaning method, and the differences in the removal efficiency of the alternatives with the ultrasonic cleaning method were negligible. Among the alternatives, the overall cleaning performances were obsorved as almost similar. Before selecting the ultimate cleaning solvent, the application of cleaning machine, environmental issues, and economics are simultaneously considered with the cleaning performance.

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.24-34
• /
• 2004

Transient sorption experiments were conducted among several combinations of fluoropolymers and various organic solvents. Fully fluorinated polymer tended to exhibit ideal sorption behavior, while partially fluorinated polymers showed anomalous sorption behaviors with a drastic acceleration at the final stage of uptake. Minimization of least-squares of the measured and predicted fractional uptake, which indicated the increasing degree of deviation from Fickian diffusion, gave values of 3.0${\times}$10$\^$-4/, 1.75${\times}$10$\^$-3/, 8.68${\times}$10/sup-3/, 1.75${\times}$10$\^$-2/, respectively, for perfluoroalkoxy copolymer, poly(ethylene-co-tetrafluoroethylene), poly(vinylidene fluoride), poly(ethylene-co-chlorotrifluoroethylene). From stress-strain tests, it was confirmed that non-Fickian diffusion is closely related to the significant variation of mechanical properties (such as modulus and tensile strength) of swollen polymer. Anomalous sorption behavior stemmed from non-Fickian diffusion caused by nonlinear disruption of polar inter-segmental bonds due to solvent-induced plasticization. Thus, it is imperative to investigate the diffusion behavior of swelling solvents in partially fluorinated polymers, especially for the application to barrier materials or perm-selective membranes.

• Archives of Pharmacal Research
• /
• v.20 no.1
• /
• pp.1-6
• /
• 1997

We determined the microviscosity of synaptosomal plasma membrane vesicles (SPMV) isolated from bovine cerebral cortex and liposomes of total lipids (SPMTL) and phospholipids (SPMPL) extracted from SPMV. Changes in the microviscosity induced by the range and rate of lateral diffusion were measured by the intramolecular excimerization of 1, 3-di(1-pyrenyl)propane (Py-3-Py). The microviscosity values of the direct probe environment in SPMV, SPMTL and SPMPL were 38.17, 31.11 and 27.64 cP, respectively, at$37^{\circ}C$and the activation energies $(E_a)$ of the excimer formation of Py-3-Py in SPMV, SPMTL and SPMPL were 8.236, 7.448 amd 7.025 kcal/mol, respectively. Probe location was measured by polarity and polarizability parameters of the probe Py-3-Py and probe analogues, pyrene, 1-pyrenenonanol and 1-pyrenemethyl-3${\beta}$-hydroxy-22, 23-bisnor-5-cholenate (PMC), incorporated into membranes or solubilized in reference solvents. There existed a good linear relationship between the first absorption peak of the $^1_a$ band and the polarizability parameter $(n^{2}-1)/(2n^{2}+1)$.The calculated refractive index values for SPMV, SPMTL and SPMPL were close to 1.50, which is higher than that of liquid paraffin (n=l.475). The probe location was also determined by using a polarity parameter $(f-1/2f^{I})$. Here f=$({\varepsilon}-1)/(2{\varepsilon}+1)$ is the dielectric constant function and $f^I=(n^2-1)/(2n^2+1)$ is the refractive index function. A correlation existed between the monomer fluorescence intensity ratio and the solvent polarity parameter. The probes incorporated in SPMV, SPMTL, and SPMPL report a polarity value close to that of 1-hexanol $({\varepsilon}=13.29)$. In conclusion, Py-3-Py is located completely inside the membrane, not in the very hydrophobic core, but displaced toward the polar head groups of phospholipid molecules, e.g., central methylene region of aliphatic chains of phospholipid molecules.