• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.29-38
• /
• 2020

It is practically difficult to accurately measure the temperature and concentration of a large combustion systems at industrial sites in real time. Temperature measurement using thermocouple, which are mainly used, is a point-measuring method that is less accurate and less reliable to analyze the wide area range of inner combustion system, and has limitations to internal accessibility. In terms of concentration analysis, most measurement methods use sampling method, which are limited by the difficulty of real-time measurement. As a way to overcome these limitations, laser-based measurement methods have been developed continuously. Laser-based measurement are line-average measurement methods with high representation and precision, which are beneficial for the application of large combustion systems. In this study the temperature and concentration were measured in real time by water vapor and oxygen generated during combustion using Tunable Diode Laser Absorption Spectroscopy (TDLAS). The results showed that the average temperature inside the combustion system was 1330℃ and the mean oxygen concentration was 3.3 %, which showed similar tendency with plant monitoring data.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.276-284
• /
• 2000

Distributions of organic carbon (Co$_{org}$), organic nitrogen (N$_{org}$), and heavy metals (Zn, Pb, Cr, Cu, Mn) were investigated in Lake Shihwa sediments. Surface and core samples were collected in April and September, 1997 and March, 1998 for the study. The results show that these components contents are variable with sampling timeand station. In surface sediments, both Co$_{org}$ and N$_{org}$ have similar distribution pattern in which their high contents found in stations located near the land, indicating that the streams and industrial wastes seem to act as point sources. The C$_{org}$ contents are linearly related with those of heavy metals. It appears, therefore, that the distribution of heavy metals may be partly controlled by a complex interplay of biogenic, terrestial, and anthropogenic factors. The C/N ratios from three stations are in the range of 3-32, with an average of 13.2. Vertical profiles of heavy metals in sediment cores are similar to those of C$_{org}$ and N$_{org}$. Copper content of sediments is enriched compared to that of reported value before dike construction, but Zn and Mn are not deposited considerably. Especially, Pb content show less variable. Currently, anthropogenic effects of industrial complex may not reached to drainage gate area where heavy metal contents are comparable with those adjacent to coastal sediments.

• Journal of Biosystems Engineering
• /
• v.33 no.5
• /
• pp.362-369
• /
• 2008

There is developing interest in precision agriculture in Korea, despite the fact that typical Korean fields are less than 1 ha in size. Describing within-field variability in typical Korean production settings is a fundamental first step toward determining the size of management zones and the inter-relationships between limiting factors, for establishment of site-specific management strategies. Measurements of rice (Oriza Sativa L) yield, chlorophyll content, and soil properties were obtained in a small (100-m by 30-m) Korean rice paddy field. Yield data were manually collected on 10-m by 5-m grids (180 samples with 3 samples in each of 60 grid cells) and chlorophyll content was measured using a Minolta SPAD 502 in 2-m by 2-m grids. Soil samples were collected at 275 points to compare results from sampling at different scales. Ten soil properties important for rice production in Korea were determined through laboratory analyses. Variogram analysis and point kriging with and without median polishing were conducted to determine the variability of the measured parameters. Influence of variogram model selection and other parameters on the interpretation of the data was investigated. For many of the data, maximum values were greater than double the minimum values, indicating considerable spatial variability in the small paddy field, and large-scale spatial trends were present. When variograms were fit to the original data, the limits of spatial dependency for rice yield and SP AD reading were 11.5 m and 6.5 m, respectively, and after detrending the limits were reduced to 7.4 m and 3.9 m. The range of spatial dependency for soil properties was variable, with several having ranges as short as 2 m and others having ranges greater than 30 m. Kriged maps of the variables clearly showed the presence of both large-scale (trend) variability and small-scale variability in this small field where it would be reasonable to expect uniformity. These findings indicate the potential for applying the principles and technology of precision agriculture for Korean paddy fields. Additional research is needed to confirm the results with data from other fields and crops.d similar tendency with the result for the frequency less than 20 Hz, but the width of change was reduced highly.

• Journal of Pharmacopuncture
• /
• v.11 no.1
• /
• pp.21-29
• /
• 2008

Objectives : To investigate the therapeutic effects of SBVP in the treatment of patients with cancer-related pain. Design : A prospective randomized, double-blind, placebo-controlled study of SBVP. Setting : The study was conducted at the East West Cancer Center of Daejeon University Dunsan Oriental Hospital from March 1, 2007 to June 20, 2007. Patients : 11 patients diagnosed with cancer-related pain of over 3rd degree on the Numeric Rating Scale(NRS)(0, no pain at all, 10, worst pain imaginable) were entered into a double-blind, placebo-controlled trial of SBVP. They were randomized into Groups A and B(SBVP and control group, respectively) using the table of random sampling numbers and never informed of their affiliation by the coordinator. 5 of 6 patients in Group A and 4 of 5 patients in Group B completed the clinical trial. Intervention : SBVP(1ml/day) for group A and Normal Saline Placebo(1ml/day) for group B was injected into the abdomen acupoint, Zhong Wan(CV 12). The treatment was administered daily for five days. Outcome Measures : Degree of cancer-related pain was measured using the Numeric Rating Scale(NRS) before and after each treatment for "Pain right now" and "Average pain in last 24 hours". Statistical Analysis : Analysis regarding variations in NRS was carried out by applying t-tests(independent sample t-test and paired sample t-test) and Wilcoxon signed rank test with level of significance at 5%. Results : Differences in NRS of "Pain right now" for the two groups were statistically significant. The mean improvement point of SBVP was significantly higher than the control group($2.48^{\circ}{\pm}1.52$ vs $0.97^{\circ}{\pm}1.88$, p<0.05). Differences in average pain score before and after treatment in SBVP group were also significant($5.13^{\circ}{\pm}1.77$ vs $2.65^{\circ}{\pm}0.67$, p<0.05) compared with control group. The two groups showed no significant differences for long term effects in "Average pain in last 24 hours." Conclusion : Although further study will be needed on the large scale, SBVP shows potential as an effective treatment for immediate relief of cancer-related pain.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.543-550
• /
• 2018

The rapid growth of IoT technology induced by the fourth industrial revolution has resulted in research into various types of wireless sensors, and applications based on this technology are prevalent in many areas. However, among the various sites where this technology is used, railway bridges and tunnels with lengths of tens of kilometers have problems with data acquisition, due to the signal noise induced by the long distance measurement and EMI induced by the high voltage power feeding system, when conventional electric sensors are used. To overcome these problems, many studies on fiber optic sensors have been conducted as a substitute for the conventional electric sensors. However, restrictions on the types of fiber optic sensors have limited their application in railways. For this reason, a hybrid measurement system with IoT based wireless data communication, in which both electric and fiber optic sensors can be applied simultaneously, has been developed. In this study, in order to evaluate the applicability of the hybrid measurement system developed in the previous study, a real-time test for 4 types of measurement environments, which reflect possible railway sites, is performed. As a result, it was confirmed that the signals from both the electric and fiber optic sensors, which were acquired at a remote area in real-time, showed good agreement with each other and that this measurement system has the potential to handle sensors with a sampling rate of 2.5 kHz. In the future, it is expected that the IoT-based hybrid measurement system will contribute to the improvement of structural safety by enabling real-time structural health monitoring when applied to various measurement sites.

• Korea journal of population studies
• /
• v.18 no.2
• /
• pp.1-22
• /
• 1995

In this paper, the methods to measure the mean age at first marriage is examined, and by analysing data of Korean women for the period 1970-1990, the differences that each methods make on measurements of the mean age at first marriage are presented. The main findings were : The Hajnal's SMAM, the most used index in studies of the pattern of marriage in Korea, was not a measure based on the marriages for a specific period. The resulting biases, in cases of 1970-1990 Korean women, were below 0.3 year in age, which can be considered small, if the changes in the pattern of marriage in these periods took into account. But the possibility of bringing larger bias cannot be excluded. Also the direction of biases was toward raising the mean age when marriage was in upward tendency. Considering the availability of data in Korea, the utilization of the simple mean or the measure from Agarwala method according to the purpose is recommendable. The mean age at first marriage by Agarwala(ASMAM) meets with the one computed from a gross nuptiality table based on the cohort's marriage rates for a specific period. The time series of the proportion single by age groups obtained from the population censuses showed high consistency. However when they were compaired with those computed from sample surveys at a same point of time, significant differences(at $\alpha$=0.05) were found in some major age groups. It was also pointed out that these differences were not caused by the problems related with the sampling frame for surveys or the survey questions.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.50-61
• /
• 1995

A time scale modification method yielding rate-modified speech while conserving the characteristic of speech was implemented in real-time using a goneral purpose digital signal processor. Time scale modification changed pronunciation speed only, producing a time difference between the input signal and the modified signal, making it impossible to implement it in real-time. In this thesis, a system was implemented to remove the time difference between the input and modified signals. Speech signals slowed down or speeded up by a physical time scale modification method, such as adjusting the motor speed of the cassett tape recorder, was used as the input signal. Physical modification that controled only the inter speed of the cassette tape player distorted the pitch period of the original speech. In this study, a real-time system was implemented so that the pitch-distorted speech was reconstructed back to the original by fractional sampling pitch shifting using an FIR filter, and this signal was time scale modified to match the cassette tape recorder motor speed using SOLA time-scale medification. In experiments using speech signals medifiedby the proposed method, results obtained using a 16-bit resolution ADSP2101 processor and using computer simulations employing floating point operations showed about the same average frame signal-to-noise ratio of about 20 dB.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.47-56
• /
• 1999

As the density of logic gates of VLSI chips has rapidly increased, more number of I/O pins has been required. This results in bigger package size and higher packager cost. The package cost is higher than the cost of bare chips for high I/O count VLSI chips. As the density of logic gates increases, the reduction method of the number of I/O pins for a given complexity of logic gates is required. In this paper, we propose the novel I/O interface circuit using CTR (Constant-Transition-Rate) code to reduce 50% of the number of I/O pins. The rising and falling edges of the symbol pulse of CTR codes contain 2-bit digital data, respectively. Since each symbol of the proposed CTR codes contains 4-bit digital data, the symbol rate can be reduced by the factor of 2 compared with the conventional I/O interface circuit. Also, the simultaneous switching noise(SSN) can be reduced because the transition rate is constant and the transition point of the symbols is widely distributed. The channel encoder is implemented only logic circuits and the circuit of the channel decoder is designed using the over-sampling method. The proper operation of the designed I/O interface circuit was verified using. HSPICE simulation with 0.6 m CMOS SPICE parameters. The simulation results indicate that the data transmission rate of the proposed circuit using 0.6 m CMOS technology is more than 200 Mbps/pin. We implemented the proposed circuit using Altera's FPGA and confimed the operation with the data transfer rate of 22.5 Mbps/pin.

• Journal of Environmental Health Sciences
• /
• v.44 no.4
• /
• pp.340-347
• /
• 2018

Objectives: This study was performed to determine environmental hazard factors and provide more eco-friendly child activity spaces within children's playgrounds installed in Gyeonggi-do Province. Methods: Basic (XRF) and precise (ICP, UV) inspections were conducted. The test items examined were heavy metals and parasite eggs. As a sampling point, painted finish materials (180), synthetic rubber (50), and sand (50) were selected. Results: The total excess rate of heavy metals in the XRF was found to be 7.4% (17/230 points). In a comparison between the basic and precise inspections with 17 excess points, the concentration deviation between the two tests was found to be from 0.01 to 7.7 times, resulting in a large difference. Furthermore, all the excess samples were dual samples. However, the contribution rates of Pb and $Cr^{6+}$ to combined concentration were found to be 85.1 and 14.9% for basic inspection and 91.9 and 8.1% for precise inspections, so there is a similar tendency between the two tests. The excess rate of parasite eggs in sand was expressed at 6%. The excess rate of heavy metals in synthetic rubber was found to be 0%. Conclusion: The reliability of the XRF is low. However, considering the contribution rate of Pb and $Cr^{6+}$ between the two tests, it is likely to be applicable for screening. Dual samples provided high concentrations and excess samples and care should be taken when managing them.

• Journal of Korean Society of Forest Science
• /
• v.102 no.3
• /
• pp.407-414
• /
• 2013

This study was conducted to classify forest cover types using the multivariate statistical analysis in the natural forest of western Mt. Jiri. On the basis of the vegetation data by point quarter sampling, the adopted analytical methods were species-area curve (SAC), hierarchical cluster analysis (HCA), indicator species analysis (ISA), and multiple discriminant analysis (MDA). SAC selected the outlier tree species which was likely to have no influence on the classification of forest cover types, excluded from all analytical process. Based on forest vegetative information, HCA classified the study area into 2 to 10 clusters and ISA indicated that the optimal number of clusters were seven. MDA was taken to test the clusters that classified with HCA and ISA. The seven clusters were classified appropriately as overall classification success were 91.3%. The classified forest cover types were named by the ratio of the dominant species in the upper layer of each cluster. They were (1) Quercus mongolica Pure forest, (2) Mixed mesophytic forest, (3) Q. mongolica - Q. serrata forest, (4) Abies koreana - Q. mongolica forest, (5) Fraxinus mandshurica forest, (6) Q. serrata forest, and (7) Carpinus laxiflora forest.