• Composites Research
• /
• v.32 no.5
• /
• pp.249-257
• /
• 2019

In this paper, the buckling behavior of triaxially braided circular arch with monosymmetric open section subjected to three-point bending was studied experimentally and numerically. First, test specimens were manufactured using vacuum assisted resin transfer molding (VARTM). Then the specimen was tested under three-point bending to determine the ultimate buckling strength. Before performing the numerical analysis, effective material properties of the braided composite were obtained through micro-meso scale analysis virtual testing validated with available test results. Then linear buckling analysis and geometrically non-linear post buckling analysis, established to simulate the test setup, were performed to study the buckling behavior of the composite frame. Analysis results were compared with experimentally obtained ones for verification. The effect of manufacturing defects of tow misalignment, irregular surface and resin rich region, and uncertainties during test setup were studied using numerical models. From the numerical analyses performed it was observed that both manufacturing defect and uncertainties had effect on the buckling behavior and strength.

• Archives of Plastic Surgery
• /
• v.41 no.6
• /
• pp.709-715
• /
• 2014

Background The distally based sural artery flap is a reliable, local reconstructive option for small soft tissue defects of the distal third of the leg. The purpose of this study is to describe an adipofascial flap based on a single sural nerve branch without sacrificing the entire sural nerve, thereby preserving sensibility of the lateral foot. Methods The posterior aspect of the lower limb was dissected in 15 cadaveric limbs. Four patients with soft tissue defects over the tendo-achilles and ankle underwent reconstruction using the adipofascial flap, which incorporated the distal peroneal perforator, short saphenous vein, and a single branch of the sural nerve. Results From the anatomical study, the distal peroneal perforator was situated at an average of 6.2 cm (2.5-12 cm) from the distal tip of the lateral malleolus. The medial and lateral sural nerve branches ran subfascially and pierced the muscle fascia 16 cm (14-19 cm) proximal to the lateral malleolus to enter the subcutaneous plane. They merged 1-2 cm distal to the subcutaneous entry point to form the common sural nerve at a mean distance of 14.5 cm (11.5-18 cm) proximal to the lateral malleolus. This merging point determined the pivot point of the flap. In the clinical cases, all patients reported near complete recovery of sensation over the lateral foot six months after surgery. All donor sites healed well with a full range of motion over the foot and ankle. Conclusions The distally based sural artery adipofascial flap allowed for minimal sensory loss, a good range of motion, an aesthetically acceptable outcome and can be performed by a single surgeon in under 2 hours.

• Journal of Information Management
• /
• v.39 no.2
• /
• pp.95-130
• /
• 2008

This article intends to provide a direction for reconstructing the national regime of archival appraisal in electronic record environments. Functional appraisal, which inevitably carries out for appraising electronic records, has defects in aspect of selecting archives important in a national point of views. To do so, this article discusses defects of functional appraisal, and then suggests the necessity of archival appraisal strategies that complements functional appraisal. To investigate this archival appraisal strategies, it analyzes Australia's Whole-of-Government Functional Analysis, United Kingdom's Acquisition Policy and Appraisal Policy, Germany's Cooperative Cross-Archives Appraisal and Canada's Macro Appraisal. Ultimately, this analysis is able to establish a base of the regime of archival appraisal which will harmonize primary value at current stage with secondary value at non-current stage in a national point of views.

• Journal of applied mathematics & informatics
• /
• v.30 no.3_4
• /
• pp.365-380
• /
• 2012

Non-negative matrix factorization (NMF) is a very efficient method to explain the relationship between functions for finding basis information of multivariate nonnegative data. The multiplicative update (MU) algorithm is a popular approach to solve the NMF problem, but it fails to approach a stationary point and has inner iteration and zero divisor. So the elementwisely alternating projected gradient (eAPG) algorithm was proposed to overcome the defects. In this paper, we use the fact that the equilibrium point is stable to prove the convergence of the eAPG algorithm. By using a classic model, the equilibrium point is obtained and the invariant sets are constructed to guarantee the integrity of the stability. Finally, the convergence conditions of the eAPG algorithm are obtained, which can accelerate the convergence. In addition, the conditions, which satisfy that the non-zero equilibrium point exists and is stable, can cause that the algorithm converges to different values. Both of them are confirmed in the experiments. And we give the mathematical proof that the eAPG algorithm can reach the appointed precision at the least iterations compared to the MU algorithm. Thus, we theoretically illustrate the advantages of the eAPG algorithm.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.51-56
• /
• 2000

Demand for new nondestructive evaluations is growing to detect tensile crack growth behavior to predict long term performance of materials and structure in aggressive environments, especially when they are in non-visible area. Acoustic emission technique is well suited to these problems and has drawn a keen interests because of its dynamic detection ability, extreme sensitivity and location of growing defects. In this study, we analysed acoustic emission signals obtained in tensile test of high strength fire resistance steel for frame structure with time frequency analysis methods. The results obtained are summaries as follows ; In the T and TN specimen consisting of ferrite and pearlite grains, most of acoustic emission events were produced near yield point, mainly due to the dislocation activities during the deformation. However, B specimen under $600^{\circ}C$ - 10min had a two peak which was attribute to the presence of martensite phase. The first peak is before yield point the second is after yield point. The sources of second acoustic emission peak were the debonding of martensite-martensite interface and the micro-cracking of brittle martensite phase. In $600^{\circ}C$-30min to $700^{\circ}C$-60min specimens, many signals were observed from area before yield point and counts were decreased after yield point.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.4
• /
• pp.746-757
• /
• 1996

Bony defects may be found as a result of congenital anomalies, traumatic injury, automobile collisions and industrial accidents in the maxillofacial area. Such conditions are often associated with severs functional and esthetic problem. Various surgical procedure has been utilized in attempts to repair and reconstruct bony defects. Bone is a complex, living, constantly changing tissue. The architecture and composition of cancellous and cortical bone allow the skeleton to perform its essential mechanical functions. Periosteum covers the external surface of bone and consists of two layers : an outer fibrous layer and an inner more cellular and vascular layer. The inner osteogenic layer or cambium layer can form new bone while the outer layer firms part of the insertions of tendons, ligaments and muscles. This study was under taken to evaluate bone healing process on partial defect of calvarial bone with or without periosteum in rat. We made calvarial defects of different size(4mm, 6mm, 8mm) with periosteum or without periosteum in rat to study the effect of defect size on healing process. Control and experimental groups sacrified at 1, 2, 4, 6, 8 weeks, postoperatively. We examed the specimens by gloss findings, light microscophy, and fluorescent microscophy. The results were as follows. 1. Gloss findings: Control groups are larger bony defects than experimental groups after 2 weeks, and than control groups advanced healing of defected bone but experimental groups are lesser after 4, 6 weeks. After 8 weeks, bone defect has not been identified in control and experimental groups. 2. Light microscope: All defects of control groups are larger bony defects than experimental groups after 2 weeks. And than control groups show smaller defect after 4 weeks. After 8 weeks, the control group reveal pin-point sized, hardly identifiable defect space and the experimental group reveal small, but definite defect space. 3. Fluorescent microscope : Each week, new bone formation of control group is very similar to the experimental group. In this study, Osteogenesis of calvarial bone defects with periosteum or without periosteum was examined for 8 weeks in rats. The replaced periosteum had batter new bone formation than the removed periosteum.

• Archives of Reconstructive Microsurgery
• /
• v.21 no.2
• /
• pp.143-148
• /
• 2012

Purpose: This report presents the authors' experience of twelve patients with sural artery flap for soft tissue defects around the knee joint. Materials and Methods: The patients' age ranged from 25 to 80 years; seven of the patients were male and five were female. The cause of soft-tissue defects involved wide excision for malignant soft tissue tumor, tumor prosthesis related infection, infection after total knee arthroplasty and chronic osteomyelitis. Postoperative range of motion was checked. The sensibility of flap was evaluated by Semmes-Weinstein monofilaments and two-point discrimination. Results: All flaps survived and provided satisfactory coverage of the defect. There was no complication except one delayed skin graft incorporation at donor site. Seven knee joints which had been stiff previously gained average 58 degrees of ROM postoperatively. All flaps retained sensibility and showed no significant increase in sensory thresholds comparing with contralateral side. Conclusion: Sural artery flap not only shows high survival rate and broad coverage ability, but also offers improvement in range of motion and preservation of sensation. We speculate that sural artery flap is valuable for the reconstruction of the soft tissue defects around knee joint.

• Journal of Welding and Joining
• /
• v.13 no.2
• /
• pp.42-52
• /
• 1995

In the evaluation of aging degradation on the structural materials based on the fracture mechanics, the detection and size prediction of defect are very important. Aiming at nondestructive detection and size prediction ol defect with high accuracy and resolution, therefore, an lnduced Current Focusing Potential Drop(ICFPD) technique has been developed. The principle of this technique is to induce a focusing current at an exploratory region by an induction wire flowing an alternating current(AC) that is a constant ampere and frequency. Defects are assessed with the potential drops that are measured the induced current on the surface of metallic material by the potential pick-up pins. In this study, the lCFPD technique was applied for evaluating the location and size of the surface crack and blind crack made in plate specimens, and also for detecting the defects existing in valve, a field component, that were developed by SCC etc. during the service. The results of this present study show that surface crack and blind crack are able to defect with potential drop. these cracks are distinguished with the distribution of potential drop, and the crack depths can be estimated with each normalized potential drop that are parameters estimating the depth of each type crack. In the field component, the defects estimated by experiment result correspond with those in the cutting face of the measuring point within a higher sensitivity.

• Archives of Reconstructive Microsurgery
• /
• v.10 no.2
• /
• pp.163-168
• /
• 2001

The defects of the abdominal wall could be brought about either congenitally, for instances in such cases as omphalocele or gastroschisis, or by various acquired causes-trauma, excision of tumors, excision of burn scar, tissue necrosis caused by infection, hematoma after abdominal surgery, tissue necrosis after radiation therapy and so on. As for the techniques of the reconstruction of the abdominal wall defects, many authors have developed and reported diverse methods. To summarize, primary closure, skin graft, local skin flaps, various myocutaneous flaps, free flap, fascia graft, artificial mesh, tissue expansion, etc could be used in the reconstruction of the abdominal wall defects. The periumbilical perforator-based island skin flap has a many advantages such as no significant sacrifice of the rectus abdominis muscle, wide rotation arc, reliable blood flow of the perforator, short elevation time for flap, and for middle-aged, obese patients, the donor site may be the best from the cosmetic point of view. We used perforator-based island skin flap in 5 cases with reasonable result from March 1999 to May 2001. There were no significant complications and donor sites could be repaired primarily.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.7
• /
• pp.249-258
• /
• 2018

The importance of software in military weapon systems is increasing, and the software structure is becoming more complicated. We therefore must thoroughly verify its reliability. In particular, the defects from the interaction of the software components that make up the weapon system are difficult to prevent only with static testing and code coverage level dynamic testing. In this paper, we classify dynamic software defect types and analyze the issues reported in the Open Source Software (OSS) used in the US department of defense weapon systems. The dynamic defects classified in this paper usually occur after integration, and it is difficult to reproduce and identify the cause. Based on this analysis, we come to the point that the software integration test must be enhanced in order to verify the reliability of the weapon system.