• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 학술대회
• /
• pp.255-260
• /
• 1999

본 논문에서는 데이터 입출력을 고속으로 수행하며 작은 지연시간을 갖는 512-point FFT프로세서의 구조및 설계에 대하여 보인다. 설계된 512-point FFT프로세서는 OFDM방송에서 요구하는 심볼 레이트로 테이타를 처리할 수 있는 것을 목표로 하였다. 설계된 512-point FFT프로세서는 써플메모리를 이용하여 메모리의 요구사항을 최소화하며, 새로운 strength reduction method를 적용한 복소곱셈기를 이용하여 기존의 복소곱셈기에 비하여 하드웨어의 비용이 적은 특징을 갖는다.

• 한국안전학회지
• /
• 제22권3호
• /
• pp.88-97
• /
• 2007

A point based speed enforcement system(SES) has been widely used in roadways to reduce the operating speeds and potential traffic accidents. Recently, the needs for introudcing new SES using point-to-point speed measurement was presented, however, no practical guidelines or justification of the system was available. This study investigated the effectiveness of the current SES and introduction of the new SES through user interview survey method. Survey results showed that 33% of respondents were unsatisfactory to the current way of SES operation, which was 11% higher than satisfactory respondents, and about 70% of the respondents supported the introduction of point-to-point based SES operation. A majority of respondents preferred the straight roadway segment, bridge and tunnel, and curved roadway segment for a start application site with the segment length of 1-5 km long. Using these survey results, an introduction scheme was discussed in terms of legal bases, installation criteria, and operational guidelines.

• Journal of applied mathematics & informatics
• /
• 제28권3_4호
• /
• pp.877-882
• /
• 2010

In this paper, a third-order three-point boundary value problem on time scales is considered. We establish criteria for the existence of a solution and a positive solution by using the Leray-Schauder fixed point theorem. An example is also given to illustrate our results.

• 한국측량학회지
• /
• 제30권4호
• /
• pp.335-342
• /
• 2012

건축, 토목, 의료, 컴퓨터 그래픽스 분야 등 다양한 분야에서 이용되는 3D point cloud는 최근 레이저 스캐너의 발달로 인해 그 용량이 점점 커지게 되었다. 컴퓨터 메모리의 용량을 넘어서서 모든 데이터를 한 번에 처리할 수 없는 대용량 3D point cloud를 가시화하고 편집하기 위해 여러 전처리 및 가시화 방법들이 소개되었고 본 논문에서 비교한 QSplat의 경우 3D 모델의 형상 확인과 용량 감소를 목적으로 원본 좌표를 손실 압축하여 저장하였다. 본 논문에서 제시하는 방법은 3D point cloud를 정육면체 격자로 분할하고 center sampling을 통해 가상점 집합을 생성하며 가시화 과정에서 격자에 저장된 point 집합 취득을 통한 빠른 렌더링이 가능하다. 홍익대학교 인근 지역을 측정한 약 1억 2천만 개 point의 대용량 3D point cloud를 QSplat과 다단계 정육면체 격자 기반 방법으로 비교한 결과 전처리 과정에서는 QSplat이, 가시화 과정에서는 다단계 정육면체 격자 기반 방법이 빠른 속도를 보여주었다. 또한 다단계 정육면체 격자 기반 방법은 point의 원본 좌표를 저장하기에 추후 가시화 외에 편집, segmentation 등의 작업을 고려하여 고안되었다.

• 한국의류산업학회지
• /
• 제4권2호
• /
• pp.145-155
• /
• 2002

In order to investigate how upper limb motion gives influence on clothing, this study measured tests by following standards: Front Vertical motion, Side-Vertical motion, and Horizontal motion. For this study, the procedures in the order of alphabet are applied. A. Eeach of testee's pattern was copied by the motion with a method of tight fitting technique. B. Analyzing each of the size-change on measuring item. C. Studying the moving aspects at each datum points. The results shows that the biggest change can be found in the following items. 1) In vertical motion of F4 (the length to shoulder point from A-point) 2) In horizontal motion of F5 (the length to front-width point from A-point), the check-result gained by checking the notice between motions shows that the most noticeable items are F4 (the length to shoulder point from A-point), F5 (the length to front-width point from A-point), F6 (the length to armpit point from A-point), B7 (the length to side-waist point from B-point). In result of the study of datum point's movement by motion, the items which were measured with the longest on straight-distance in vertical motion are the front and rear-shoulder, and the rear-shoulder, front-armpit in horizontal motion each. In the movement of each datum points by length, the check-result gained by checking the notice between motions shows that the most remarkable item is the front-shoulder.

• 대한한의학회지
• /
• 제28권4호
• /
• pp.86-94
• /
• 2007

Objective : Kuesu point is a newly discovered point, it is located in 3-cun from the centre of sacrum laterally, paralleled to the 4th foramen on the sacrum. This controlled trial was to evaluate the superior effect of Kuesu point on back pain which radiated to lower extremities. Methods : Randomized Controlled Trial (RCT) and Single Blind in patient was designed. Patients (n=31) were randomized to two groups, Kuesu-point acupuncture group (Group A, n=16) and non Kuesu point acupuncture group (Group B, n=15). Group A was acupunctured on B25 (大腸兪), B26 (關元兪) and B60 (崑崙) with Kuesu point. Group B was acupunctured on the same points without Kuesu point. The clinical subjects were female patients. Beside acupuncture, the other therapies were excluded. Clinical period was three weeks total. Each group was treated 4-5 times per week for 3 weeks. The outcome measurements were The Estimation Index of Backache (quality of life), Pain Rating Scale (pain intensity) and other physical examinations (ROM, SLR, etc.). Results : 31 patients (Group A: n=16, Group B: n=15) were Randomized, 6 of them dropped out. Eventually 25 patients (Group A: n=15, Group B: n=10) were included in the analysis. Group A acupunctured on Kuesu point scored more significant Estimation Index of Backache and lower PRS (Pain Rating Scale) than Group B acupunctured without Kuesu point (p=0.003/2). It turned out that the group acupunctured on Kuesu point show meaningful high improvement index. And other examination's results showed that the treatment effects of Group A are twice as better as Group B. Conclusion : These results suggest that Kuesu point acupuncture was more effective on lower back pain and improved the life quality of patients, being compared with non Kuesu point acupuncture.

• 디지털산업정보학회논문지
• /
• 제6권1호
• /
• pp.13-22
• /
• 2010

In this paper, we propose a management system for positioning and indicating the surveyed control point using RFID and UMPC. This system is composed of digital control point, management system and application. The digital control point transmits information of the surveyed control point and the management system receives the data from the digital control points and manages the scattered digital control points. The system offers three services for managing the surveyed control point. The first service is control point monitoring service for identifying the change of location, locating the missing control point and the second service is control point search service notifying selected control point to user, and the third service is control point land management service for editing the control point information in the land. Therefore, this system makes it easy for administrators to access the control point information of the scattered surveyed control point through the country and enhances the managing efficiency.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.57-64
• /
• 2017

This study was reviewed the noise reduction effects with installation of 'point to point speed camera' for controlling the speed of the car. The multiple regression analysis was performed to know how the relationship between the noise level and these parameters, such as measured traffic volume and rate of heavy vehicle and weighted average speed was changed with and without the 'point to point speed camera'. In the analysis results shows that the less traffic volume, the more noise reduction effect has been increased and the more traffic volume, the more noise reduction effect has been reduced. And noise reduction effects by the 'point to point speed camera' was different from each measured point. The cause of the difference was determined that inadequate 'point to point speed camera' position to see the effect of noise reduction. It is determined to require a more study to improve the noise reduction effects of the 'point to point speed camera' such as the camera position adjustment.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.263-274
• /
• 2018

In this study, we propose a frequency domain spectral element method (SEM) for the vibration analysis of a multi-span beam subjected to a moving point force. This study is an extension of the authors' previous study for a single-span beam subjected to a moving point force, where the two-element model-based SEM was applied. In this study, each span of a multi-span beam is represented by the Timoshenko beam model and the moving point force is transformed into the frequency domain as a series of each stationary point force distributed on the multi-span beam. The span at which a stationary point force is located is represented by two-element model, but all other spans are represented by one-element models. The vibration responses to a moving point force are obtained by superposing all individual vibration responses generated by each stationary point force. The high accuracy and computational efficiency of the proposed SEM are verified by comparing the solutions by SEM with exact analytical solutions by the integral transform method (ITM) as well as the solutions by the finite element method (FEM).

• Journal of the Optical Society of Korea
• /
• 제20권5호
• /
• pp.633-640
• /
• 2016

In a dual lens stereoscopic camera, a convergence point determines the stereopsis effects of a video. When a user zooms an object, a convergence point is fixed since it is not coupled with a zoom function. Due to the fixed convergence point, it is possible for a zoom to cause the excessive binocular disparity resulting in visual discomfort. In this paper, to solve this problem, we build the relational model including all phenomena possible to arise and propose the adjustment methods of a convergence point by the positions of a focus, an object and a convergence point. We also evaluate the experiments measuring a binocular disparity and the subjective test to investigate the visual comfort. The results show that one of the proposed methods produced more comfortable 3D images to viewers than the others.