• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.1733-1736
• /
• 2005

본 논문에서는 기존의 설계 방법의 문제점을 해결하기 위한 설계 방법인 플랫폼 기반 설계에서 사용할 수 있는 DSP 기반 플랫폼을 구현하였다. 구현된 DSP 기반 플랫폼을 AMBA AHB 버스를 바탕으로한 듀얼프로세서 플랫폼과 crossbar switch 구조의 버스 구조를 가지고 4개의 프로세서를 연결한 멀티프로세서 플랫폼으로 확장하여 검증함으로서 이질적인 환경에서 동작함을 나타내었다. 멀티프로세서 플랫폼에서는 DVB-T baseband 수신기를 HW/SW 분할 구현하고 성능 평가를 수행하였다. DSP 기반 플랫폼은 유연성, 확장성, 고속의 연산의 특징을 가진다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.225-234
• /
• 2019

By using the Triboelectric nanogenerators, known as TENG, we can take advantages of high conversion efficiency and continuous power output even with small vibrating energy sources. Nonlinear energy extraction techniques for Triboelectric vibration energy harvesting usually requires synchronized active electronic switches in most electronic interface circuits. This study presents a nonlinear energy harvesting with high energy conversion efficiency to harvest and save energies from human active motions. Moreover, the proposed design can harvest and store energy from sway motions around different directions on a horizontal plane efficiently. Finally, we conducted a comparative analysis of a multi-mode energy storage board developed by a silicon-based piezoelectricity and a transparent TENG cell. As a result, the experiment showed power generation of about 49.2mW/count from theses multi-fully harvesting source with provision of stable energy storages.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.153-162
• /
• 2018

The importance of energy harvesting technique is increasing due to the elevated level of demand for sustainable power sources for wearable device applications. In this study, we developed an Energy Harvesting wearable Platform(EH-P) architecture which is used in the design of a multi-energy source based on TENG. The proposed switching circuit produces power with higher current at lower voltage from energy harvesting sources with lower current at higher voltage. This can powers microcontrollers for a short period of time by using PV and TENG complementarily placed under hard conditions for the sources such as indoors. As a result, the whole interface circuit is completely self-powered with this makes it possible to run of sensing on a Wearable device platform. It was possible to increase the wearable device life time by supplying more than 29% of the power consumption to wearable devices. The results presented in this paper show the potential of multi-energy harvesting platform for use in wearable harvesting applications, provide a means of choosing the energy harvesting source.

• The KIPS Transactions:PartC
• /
• v.10C no.5
• /
• pp.585-594
• /
• 2003

Java card is one of promising smart card platform with java technology. Java card defines necessary packages and classes for Embedded device that have small memory such as smart card Jana card is compatible with EMV that is Industry specification standard and ISO-7816 that is international standard. However, Java card is not offers user authentication protocol. In this paper, We design and implement an user authentication protocol applicable wireless devices based on Java Card using standard 3GPP Specification (SMS), Java Card Specification (APDU), Cryptography and so on. Our Java Card user authentication techniques can possibly be applied to the area of M-Commerce, Wireless Security, E-Payment System, Mobile Internet, Global Position Service, Ubiquitous Computing and so on.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.525-528
• /
• 2006

In this letter, we present a design of a single chip video decoder called advanced mobile video ASIC (A-MoVa) for mobile multimedia applications. This chip uses a mixed hardware/software architecture to improve both its performance and its flexibility. We designed the chip using a partition between the hardware and software blocks, and developed the architecture of an H.264 decoder based on the system-on-a-chip (SoC) platform. This chip contains 290,000 logic gates, 670,000 memory gates, and its size is $7.5\;mm{\times}7.5\;mm$ (using 0.25 micron 4-layers metal CMOS technology).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.83-93
• /
• 2013

Recently, the SURF algorithm, which is conjugated for object tracking system as part of many computer vision applications, is a well-known scale- and rotation-invariant feature detection algorithm. The SURF, due to its high computational complexity, there is essential to develop a hardware accelerator in order to be used on an IP in embedded environment. However, the SURF requires a huge local memory, causing many problems that increase the chip size and decrease the value of IP in ASIC and SoC system design. In this paper, we proposed a way to design a SURF algorithm in hardware with greatly reduced local memory by partitioning the algorithms into several Sub-IPs using external memory and a DMA. To justify validity of the proposed method, we developed an example of simplified object tracking algorithm. The execution speed of the hardware IP was about 31 frame/sec, the logic size was about 74Kgate in the 30nm technology with 81Kbytes local memory in the embedded system platform consisting of ARM Cortex-M0 processor, AMBA bus(AHB-lite and APB), DMA and a SDRAM controller. Hence, it can be used to the hardware IP of SoC Chip. If the image processing algorithm akin to SURF is applied to the method proposed in this paper, it is expected that it can implement an efficient hardware design for target application.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.225-234
• /
• 2006

In this paper, we design a combined security processor, ECC, MD-5, and AES, as a SIP for cryptography of securing contents. Each SIP is modeled and designed in VHDL and implemented as a reusable macro through logic synthesis, simulation and FPGA verification. To communicate with an ARM9 core, we design a BFM(Bus Functional Model) according to AMBA AHB specification. The combined security SIP for a platform-based SoC is implemented by integrating ECC, AES and MD-5 using the design kit including the ARM9 RISC core, one million-gate FPGA. Finally, it is fabricated into a MPW chip using Magna chip $0.25{\mu}m(4.7mm{\times}4.7mm$) CMOS technology.

• Journal of Korea Multimedia Society
• /
• v.6 no.3
• /
• pp.481-487
• /
• 2003

Because XML is a W3C standard and has characteristics like platform-independent, it has a critical role in e-commerce. Business rules and Procedures should be standardized for efficient B2B integration. But a lot of companies are its own XML documents instead of standard documents. Therefore many organizations try to make standards for e-commerce based on framework. In this paper, we designed and implemented XML Messaging System based on TCP/IP protocols. This system are designed by module. Because, it is easy to extensibility of system. So we can more easily and efficiently build e-commerce system based on this XML messaging system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6C
• /
• pp.535-543
• /
• 2002

In order to overcome disadvantages of existing centralized network management systems that use simple objects, dynamic object platforms are proposed as alternative systems. So the distributed network management systems are implemented using various distributed platform such as CORBA and Java-RMI. Subsequently mobile agent-based platforms are proposed. The mobile agent-based platform can additionally provide flexibility and scalability to network management system that CORBA or Java-RMI based platforms do not support. In this paper, we address an architecture to solve the problem of the occurrence of additional traffic by using mobile agent and to save resources of network element. Our proposal in this paper is an efficient network management architecture using motile agents. And we make use of mobile agents for minimizing of traffic that can happen when mobile agents moves. Also we design agents using information architecture of TMN for efficient resource management of network element and improvement of operation performance.

• The KIPS Transactions:PartA
• /
• v.14A no.7
• /
• pp.391-398
• /
• 2007

In this paper, we design a future mobile camera standard interface based on the MIPI CSI-2 and D-PHY specification. The proposed CSI-2 have the efficient multi-lane management layer, which the independent buffer on the each lane are merged into single buffer. This scheme can flexibly manage data on multi lanes though the number of supported lanes are mismatched in a camera processor transmitter and a host processor. The proposed CSI-2 & D-PHY are verified under test bench. We make an experiment on CSI-2 & D-PHY with FPGA type test-bed and implement them onto a mobile handset. The proposed CSI-2 & D-PHY module are used as both the bridge type and the future camera processor IP for SoC.