• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.187-195
• /
• 2015

In this study, a field test of uplift load was carried out using 15 greenhouse foundations fabricated in full scale on a sand soil to examine the uplift capacity of plastic film greenhouse and glasshouse foundations for disasterproof standard. As a result, the maximum uplift capacity of the target greenhouse foundations was shown to be in the range from 11.6kN to 82.4kN according to the differences between the forms and sizes of the foundation. As a result of the examination of the applicability using the field uplift load test result of the theoretical equation proposed for maximum uplift capacity calculation of greenhouse foundations, we found that in general, the conventional theoretical equation for the calculation provided numerical values close to the field test results. However, the soil considered in this study was a sand; thus, in the future, verifying the conventional theoretical equation for the uplift capacity calculation of a cohesive soil would be necessary.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.402-410
• /
• 2017

The effect of the steel pipe member joint on the design performance of a plastic multi-span greenhouse was analysed through the comparing full-scale experiment and numerical analysis. The design performance of the greenhouse is generally evaluated through numerical analysis, but it is rare to consider the characteristics of the connections or joints of the members. In this study, the effect of the column-gutter beam-rafter-wind break wall joint on the design performance of the whole structure of a plastic multi-span greenhouse was analysed. The numerical results with assuming that the member joint are rigid condition were compared with the full-scale load test results using member joints used in the field. The stiffness of the entire structure was compared using the load-displacement relationship and the change of the load sharing ratio that the main members such as column, rafters, and wind break wall was analysed. The results of the load test were about 40% larger than the numerical result and the member stress was more than twice as large as those of the loaded columns. In order to increase the reliability of the design performance of the greenhouse, it is necessary to develop a numerical analysis model which can consider the characteristics of various joints.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.639-646
• /
• 2000

Hot air heater with light oil combustion is the most common heater for greenhouse heating in the winter season in Korea. However, since the heat efficiency of the heater is about 80%, considerable unused heat in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust gas heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The system consists of a heat exchanger made of copper pipes, ${\phi}\;12.7{\times}0.7t$ located inside the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tame The total heat exchanger area is $1.5m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to performance test it can recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690{\ell}$/hr from the waste heat discharged. The exhaust gas temperature left from the heat exchanger dropped to $100^{circ}C$ from $270^{circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{circ}C$ from $21^{circ}C$ at the water flow rate of $690{\ell}$/hr. And, the condensed water amount varies from 16 to $43m{\ell}$ at the same water circulation rates. This condensing heat recovery system can reduce boiler fuel consumption amount in a day by 34% according to the feasibility study of the actual mimitomato greenhouse. No combustion load was observed in the hot air heater.

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.695-703
• /
• 2014

We experimented with the effect of oleic acid and its appropriate concentration to prevent powdery mildew eco-friendly in a cucumber greenhouse cultivation. 'Baekbongdadaki' (Nongwoo Bio. co. Korea) was treated in the plastic greenhouse at Sangmyung University. We treated four levels of concentration of oleic acid, which were 0, 2000, 4000, 6000, and 8000 ppm. There were investigated diseased severity, diseased leaf area, control value, and pesticide injury. The degree of control values by oleic acid treatments was investigated at 3 days after treatment. The recurrence of powdery mildew was checked for 55 days. The day and night temperature in the greenhouse were controlled to 23 and $15^{\circ}C$ respectively. The humidity inside the greenhouse was not controlled to prevent outbreak of the disease. From the experimental results, oleic acid was very efficient to control powdery mildew. 2000 ppm of oleic acid was shown to be the most control efficiency without any pesticide injury. The recommended method to treat it was to spray three times every 3 weeks.

• Korean Journal of Environmental Agriculture
• /
• v.8 no.2
• /
• pp.142-147
• /
• 1989

In this report, we set up a simple device which enabled us to obtain data useful to estimate the relative capacity of thermal energy retention of greenhouse built with various plastic coverings. A box($20cm{\times}20cm{\times}30cm$) framed with flexiglass at the edges and covered with thin plastic films was made, in which were placed a thermostat-controlled nichrom wire heater and a thermal probe made of thermister to monitor temperature changes. A wheaston-bridge type transducer and a chart recorder were used to record the changes of temperature inside the box The data obtained by using the device showed that the relative rate of heat toss through plastic films with identical thickness decreased in the order of PE film>EVA film>PVC film and that IR additives such as fine silica gel improved the insulating power of plastic films. This observations are in well accord with general information, demostrating the feasibility of the device in usefulness for the purpose of screening of various commercial plastic coverings.

• Journal of Applied Biological Chemistry
• /
• v.48 no.1
• /
• pp.11-15
• /
• 2005

Salinity of soils in greenhouse has been increased by massive application of fertilizers. Nitrogen fertilizer was most popular, and thus nitrate became the majority of soil salinity. Accumulation of nitrate led to deleterious effects on the growth and development of crops and vegetables. Microbial strains able to utilize nitrate and thus remove excess nitrate from farm land soils were isolated from 15 different soils of greenhouses and plastic film houses. Four strains able to grow in medium containing 50 mM $KNO_3$ were isolated, among which only E0461 showed high capacity of nitrate uptake. Nitrate uptake by E0461 was dependent on culture medium and was increased by addition of tryptone and peptone. Although E0461 was able to grow without tryptone and peptone, growth was slow, and no nitrate uptake was observed. Nitrate appeared to facilitate E0461 growth in the presence of tryptone and peptone. Through kinetic analysis, nitrate uptake was measured at various concentrations of nitrate, and half-life was calculated. Nitrate concentration decreased with increasing incubation period, and plot between half-lives and initial concentrations of nitrate fitted to single exponential function. These results suggest one major factor plays an important role in microbial nitrate uptake.

• Korean journal of applied entomology
• /
• v.42 no.1
• /
• pp.81-84
• /
• 2003

Biological control of aphids using "banker-plants with the parasitoiid, Aphidius colemani Viereck (BPAC)" was carried out on cucumber in greenhouse. The BPAC consisting of barley seedlings infested with Schiraphis graminum (Rondani) enhanced the early establishment of Aphidius colemani in the greenhouse and prolonged the control of Aphis gossypii on May 8, 2001 The BPAC was placed in the greenhouse at transplanting at the rate of 1 per 30 m2 of cucumber. Although good control effect was gained until early August after placing banker plants on May 9, the effect after then because of high temperature. The aphid population on cucumber in control plots reached to a peak on June 26, and decreased because of entomopathogenic fungus for rainy season of July, and increased again to a very high population on August.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.3
• /
• pp.47-55
• /
• 2010

Investigations on the inundation damage and improvement measures were carried out centering around the protected horticultural complex concentrated in lowlands on the side of Geum river, in Nonsan and Buyeo, Chungnam. Most greenhouses were single-span plastic houses in this area, and tomato, strawberry and watermelon were cultivated mainly. 45.8 % of whole farmhouse were experienced in damage by inundation, and a frequency of the damage was average once in 11 years. The most urgent problem at the greenhouse culture in this area was showed in order of drainage improvement, irrigation water resources and energy saving. Consideration items in drainage improvement project for protected horticulture were showed in order of extending drain pumps, extending drain canals, using concrete flume in drain ditch. It needs to consider systematic plans that can restrain new establishment of greenhouses on the lowland paddy field in drainage area. It is difficult to remove greenhouses which are already established or prohibit cultivation. Therefore we should impose minimum duty items so that greenhouse tillers can cope with inundation. And it is thought that managing agency need to minimize farmers damage by improving drainage ability and introducing maintenance pattern that is different from rice cropping.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.125-128
• /
• 2002

The uplift capacity and displacement of an earth anchor for improving the wind resistance of the 1-2W type plastic film pipe on greenhouse was tested using the steel circular vertical earth anchor with various diameters and embedded depths (L) in dry sand. The diameter (B) of the model anchor is 90mm, 120mm, 150mm, respectively. The model tests were performed embedded depth ratios (L/B) ranging from $1{\sim}3$ in loose density. In the case of diameter 90mm, as the uplift loading increased, the uplift capacity also increased until the loading was reached to ultimate uplift capacity. After that, the uplift capacity was continually increased or decreased until the experiment was finished. In general, the ultimate uplift capacity was different depending upon the anchor diameter and embedded depth ratios.

• Journal of Biosystems Engineering
• /
• v.22 no.4
• /
• pp.497-502
• /
• 1997

Automation facilities of greenhouses have been continuously developed. However, the conventional two-stage worm gear reducer reveals some problems, including low transmission efficiency. The worm gear reducer also have some difficulties in manufacturing and short life. Therefore, this study was performed to develop a planetary gear reducer, having a high Sear reduction ratio and high torque transmission efficiency. The planetary gear system consisted of a fixed ring gear and a 2-teeth differential ring gear turning slow, as the planetary pinion orbits fast around the fixed ring gear. The developed gear system can achieve a high speed reduction rate at one stage. The reducing system was employed to the greenhouse ventilation system. The reducer has the transmission efficiency of 70.5%, 2∼3 times longer life time, and twofold roll-up torque at an affordable price, comparing with conventional reducers. This reducer can be also applied to many industrial equipments, such as industrial crane, hoist, elevator and gondola etc.