• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.5
• /
• pp.239-246
• /
• 2015

Reinforced concrete shear walls are effective for resisting lateral loads imposed by wind or earthquakes. Observed damages of the shear wall in recent earthquakes in Chile(2010) and New Zealand(2011) exceeded expectations. Various analytical models have been proposed in order to incorporate such response features in predicting the inelastic response of RC shear walls. However, the model has not been implemented into widely available computer programs, and has not been sufficiently calibrated with and validated against extensive experimental data at both local and global response levels. In this study, reinforced concrete shear walls were modeled with fiber slices, where cross section and reinforcement details of shear walls can be arranged freely. Nonlinear analysis was performed by adding nonlinear shear spring elements that can represent shear deformation. This analysis result will be compared with the existing experiment results. To investigate the nonlinear behavior of reinforced concrete shear walls, reinforced concrete single shear walls with rectangular wall cross section were selected. The analysis results showed that the yield strength of the shear wall was approximately the same value as the experimental results. However, the yielding displacement of the shear wall was still higher in the experiment than the analysis. The analytical model used in this study is available for the analysis of shear wall subjected to high axial forces.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.4 no.1
• /
• pp.51-55
• /
• 2001

The characteristics of elastic waves emanating from crack initiation in 2024 and 5052 aluminum alloys subject to static and fatigue loading are investigated through laboratory experiments. The objective of the study is to determine difference in the properties of the signals generated from static and fatigue tests and also to examine if the sources of the waves could be identified from the temporal and spectral characteristics of the acoustic emission (AE) waveforms. The signals are recoded using non-resonant, flat, broadband transducers attached to the surface of the alloy specimens. The time dependence and power spectra of the signals recorded during the tests were examined and classified according to their special features. Three distinct types of signals were observed. The waveforms and their power spectra were found to be dependent on the material and the type of fracture associated with the signals. Analysis of the waveforms indicated that some signals could be attributed to plastic deformation associated with static tests. The potential application of the approach in health monitoring of aging aircraft structures using a network of surface mounted broadband sensors is discussed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.192-198
• /
• 2013

A light-weight enough to be portable yet functionally complete hand-writing machine was designed with hardware assembled and software implemented. The machine simulating human hand-writing not only allows identical massive scriptings on papers in human's proxy, but also offers emotional appearance as if the script was directly hand-written in ink. The features of human writing were independently put together to complete the action of scripting. The writing style could be altered in order to mimic a person's own specific writing style. The present work demonstrates that the assembled hand-writing machine was able to duplicate writing of scripts in almost parallel lines in consistent manner. The machine can be used in the emotional marketing area where seasonal greetings or thank-you cards are to be sent in massive manner. The pen-holding machine can also find an emotional application such as writing a short greeting note on a plastic lid on a disposable coffee cup in coffee-selling stores.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.209-215
• /
• 2013

Currently Plastic Student Identity Card has not been used frequently because it is inconvenient to possess. In this paper, we propose and develope Mobile Student Identity Card(MSIC) which consists of combination of smart phone and student identity card to support convenient campus life for students in school. The main features of the developed MSIC are as follows. First, it can confirm student identity and offer MSIC to each students by using Database. Second, it can support convenient campus life for students by adequate layout. In the performance evaluation, we use development kit based on Android and AVD(Android Virture Device) for simulation.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.301-310
• /
• 2006

In this short paper, an elasto-plastic repair and retrofit element is developed for the investigation of the seismic performance of damaged reinforced concrete members. The developed element is capable of reflecting the increased characteristics due to both repair and retrofitting for degraded strength and stiffness of the members. The element having both birth and death time can freely be activated within the user-defined time intervals during static and dynamic time-history analysis. Comparative studies are conducted for reinforced concrete members being repaired and retrofitted. Analytical predictions including the developed element display reasonable correlation with experimental results. In short, it is concluded that the developed element is capable of providing salient features for the healthy assessment of seismic performance of RC members being repaired and retrofitted.

• Journal of the Korea Furniture Society
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2014

The First bentwood chairs in the world, called "winsor chairs" were made by British craftsman in the 17th century. Since then, from the start of NO.14 using solid bentwood by 19th-century German Michael Thonet, furniture making techniques such as Bent knee, Y-leg, X-leg- were developed based on Llaminated bentwood made by Alvar Aalto of Finland in the 20th century. In the 20th century Charles Eames of the United States studied Molded plywood, using plywood to produce a variety of furniture and during the 17~20 century a variety of Bentwood were developed. Coming into the 21st century, American Matthias Pliessnig and Phil Seaton worked with past Bentwood designs, developing Bentwood further by adapting Bentwood's know-how and IT technology. Science and technology evolved and Reholz of Germany developed technology which can mold three-dimensional wood using a new matarial called 3D-veneer, In the past only plastic or metal could be moulded 3 dimensional but now beautiful wood grain patterns can be molded by utilizing this technology. Also this is comparable with the past two-dimensional molding technology. In this Sustainable Design techniauses era, Bentwood fused with IT technology has great potential as a high-tech and eco-friendly techniche.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.210-221
• /
• 2000

Plastic mold designers and frequently faced with optimizing multi-quality issues in injection molded parts. These issues are usually in conflict with each other and thus tradeoff needs to be made to reach a final compromised solution. in this study an automated injection molding design methodology has been developed to optimize multi-quality characteristics of injection molded parts. The features of the proposed methodology are as follows : first utility theory is applied to transform the original multi-objective problem into single-objective problem. Second is an implementation of a direct search-based injection molding optimization procedure with automated consideration of robustness against process variation. The modified complex method is used as a general optimization tool in this study. The developed methodology was applied to an actual mold design and the results showed that the methodology was useful through the CAE simulation using a commercial injection molding software package. Applied to production this study will be of immense value to companies in reducing the product development time and enhancing the product quality.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.67-76
• /
• 2010

Recently the trend that human emotions become central is strongly on the rise beyond functions in the area of space. In the present situation, the current study is to examine the characteristics of experiential space of emotions through an approach to space appearing in kinetic art paying attention to the fact that the new spatial expressions and forms of Kineticism lie in introduction of 'movement' as a phenomenon that humans who are main agents of experiences can perceive. For research methods, spatial expressions were proposed according to each characteristic extracting characteristics to create space through 'movement' of Kineticism, and the features of experiential space of emotion were elicited by analyzing sensible elements and perceptual characteristics which stimulate human sensitivity through expressive aspects of 'movement' appearing in the case. As a result, it was found that characteristics appeared including immersion through non-daily stimulation, empathy through visual·perceptual stimulation, syn-aesthetic experiences through stimulation of thinking senses, and perceptual activation through physical movement etc. Namely, the present study has its meanings in seeking another directions and possibilities as emotional space to activate experiencers' diverse perceptions and senses by analyzing the characteristics of experiential emotional space through 'movement' of Kineticism which is one of modern plastic arts.

• Journal of Welding and Joining
• /
• v.26 no.6
• /
• pp.74-80
• /
• 2008

A finite element modeling approach has been described for the simulation and analysis of the micron-scaled solid particle impact behavior in kinetic spraying process, using an explicit code (ABAQUS 6.7-2). High-strain-rate plastic deformation and interface bonding features of the copper, nickel, aluminum, and titanium were investigated via FEM in conjunction with the Johnson-Cook plasticity model. Different aspects of adiabatic shear instabilities of the materials were characterized as a concept of thermal boost-up zone (TBZ), and also discussed based upon energy balance concept with respect to relative recovery energy (RRE) for the purpose of optimizing the bonding process.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.3
• /
• pp.366-370
• /
• 2003

In this research, we suggest a hybrid intelligent Web recommendation systems based on Web data mining and case-based reasoning (CBR). One of the important research topics in the field of Internet business is blending artificial intelligence (AI) techniques with knowledge discovering in database (KDD) or data mining (DM). Data mining is used as an efficient mechanism in reasoning for association knowledge between goods and customers＇ preference. In the field of data mining, the features, called attributes, are often selected primary for mining the association knowledge between related products. Therefore, most of researches, in the arena of Web data mining, used association rules extraction mechanism. However, association rules extraction mechanism has a potential limitation in flexibility of reasoning. If there are some goods, which were not retrieved by association rules-based reasoning, we can＇t present more information to customer. To overcome this limitation case, we combined CBR with Web data mining. CBR is one of the AI techniques and used in problems for which it is difficult to solve with logical (association) rules. A Web-log data gathered in real-world Web shopping mall was given to illustrate the quality of the proposed hybrid recommendation mechanism. This Web shopping mall deals with remote-controlled plastic models such as remote-controlled car, yacht, airplane, and helicopter. The experimental results showed that our hybrid recommendation mechanism could reflect both association knowledge and implicit human knowledge extracted from cases in Web databases.