• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.662_663
• /
• 2009

Motor bus transfer involves the process of transferring a bus that has several critical motors to an alternate source of power when the main normal power source feeding them is interrupted. Bus transfer is a time-critical application in which the transfer progress depends on various parameters such as the type of motor, load on the motor at the time of transfer, inertia of the motor, and the combined open-circuit time constant of various motors present on the bus at the time of transfer. This paper present the result of modeling and simulation of nuclear power motor bus using ETAP(Electrical Transient Analyzing Program) program for motor and motor bus residual voltage decay characteristics.

• 제어로봇시스템학회논문지
• /
• 제15권7호
• /
• pp.655-660
• /
• 2009

In many real applications, the discrepancy problem between controller outputs and plant inputs or the abrupt variation problem of controller outputs can occur. These problems have a negative effect on control performance and stability. It is well-known that two phenomena called 'windup' and 'bump' cause these problems. So far these problems have been studied separately in each side of the anti-windup and the bumpless transfer. This paper proposes a new unified method combines the anti-windup and the bumpless transfer method using the linear quadratic minimization and a proper state space model representation for the anti-windup controller. The proposed method has a feature that it takes account of both the anti-windup and the bumpless transfer in one formula. Finally, we exemplify the performance of the proposed method via numerical examples using the controller switching between the anti-windup PID controller and the anti-windup LQ controller.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권4호
• /
• pp.33-42
• /
• 1994

The radiative heat transfer analysis in the fluidized particles layer has important application in many technological areas such as combustion chambers at high pressure and temperature, plasma generators for nuclear fusion, MHD generator using pulverized coal and the liquid droplet radiator used to reject wasted heat from a power plant operating in space. To accurately model the radiation properties of the fluidized particles layer, it is necessary to know the radiation interchange factors of particles in each layer. But the solutions are usually not possible for the equations of radiative heat transfer because it has an inherent difficulty in treating the governing intergo- differential equations, which are derived from the remote effects of radiative heat transfer. In this study, the analysis uses the Monte Carlo simulation method with optical depth model to calculate the radiation interchange factors of particles in each layer with wall and with each other.

• The Plant Pathology Journal
• /
• 제34권2호
• /
• pp.85-92
• /
• 2018

Enzyme-linked immunosorbent assay (ELISA) and polymerase chain reaction (PCR), widely used for the detection of plant viruses, are not easily performed, resulting in a demand for an innovative and more efficient diagnostic method. This paper summarizes the characteristics and research trends of biosensors focusing on the physicochemical properties of both interface elements and bioconjugates. In particular, the topological and photophysical properties of quantum dots (QDs) are discussed, along with QD-based biosensors and their practical applications. The QD-based Fluorescence Resonance Energy Transfer (FRET) genosensor, most widely used in the biomolecule detection fields, and QD-based nanosensor for Rev-RRE interaction assay are presented as examples. In recent years, QD-based biosensors have emerged as a new class of sensor and are expected to open opportunities in plant virus detection, but as yet there have been very few practical applications (Table 3). In this article, the details of those cases and their significance for the future of plant virus detection will be discussed.

• 대한인간공학회지
• /
• 제33권1호
• /
• pp.49-58
• /
• 2014

Objective: The aim of this study is to enhance the efficiency of education and training through application and management of 'Transfer of Training' in nuclear power plants. Background: Despite the sophistication and standardization of job-related skills and techniques of workers, accidents/incidents keep taking place due to human errors and unsafe actions and behaviors, which translates into the necessity to review and examine the effectiveness and influence of education and training on the workers of nuclear power plants. Method/Results: This study drew the factors of 'Transfer of Training' through a review on the preceding studies and document research. In addition, through expert examination, this study explored the expected effects and possibility of application when managing the influencing factors of 'Transfer of Training' in nuclear power plants. And lastly, management priority order for nuclear power plants was drawn through an AHP analysis. Conclusion: Among the 'Transfer of Training' factors, the training design factor was the most important. In addition, the design of the training and transfer and goal setting showed a high degree of importance among the influencing factors. Application: The management of 'Transfer of Training' in nuclear power plants enhances the capability of workers and improves the operational integrity of nuclear power plants.

• Journal of Radiation Protection and Research
• /
• 제16권1호
• /
• pp.33-42
• /
• 1991

Sr-90과 소석회를 처리한 pH 6.05의 양질사토로부터 보리에 의한 Sr-90 흡수 실험을 온실내에서 포트 재배로 실시하였다. 수확기에 보리 지 상부로의 Sr-90 흡수율은 늘쌀보리가 평균 0.41%, 올보리가 평균 0.23%였고 전이계수도 전자가 후자보다 부위에 따라 30-60% 정도 높았다. 흡수율과 전이 계수는 전체 적으로 볼 때 Sr-90 처 리 농도간에 유의 차가 인정 되지 않았다. 10a당 약 94kg에 해당하는 소석회 처리는 Sr-90 흡수를 억제하고 전이계수를 감소시키는데 효과적이지 못한 수준이었다. 보리의 부위별 Sr-90 전이 계수는 건조 중 기준으로 줄기 1.51, 및 4.45, 종실 0.35, 전지상부 1.30으로 제안될 수 있었다. Sr-90 흡수에 따른 작물체의 생육장해나 수량감소는 없었다.

• Journal of Plant Biotechnology
• /
• 제44권4호
• /
• pp.431-437
• /
• 2017

Mulberry (Morus sp.) of the family Moraceae is very economically important in Asian countries including Korea, because its leaf and fruit have been commercially used in sericulture and horticultural industries. Therefore it is necessary to develop the optimal production system for rapid and cost-effective propagation of mulberry. Our studies focused on establishing an acclimatization method for the successful plantlet production of new cultivar 'Cheongsu' which was transferred ex vitro after in vitro culture. In particular, effect of abscisic acid (ABA) addition into the last subculture medium on plantlet response to subsequent ex vitro transfer and its growth was investigated. During acclimatization, stomatal conductance and transpiration rate of ABA-pretreated plantlets were significantly lower than those of non-treated plantlets. Net photosynthetic rate of ABA-pretreated plantlets decreased after ex vitro transfer but increased after 14 days, and it was mostly higher than that of non-treated plantlets. Moreover, relative water content as well as chlorophyll contents and its ratio were also higher in ABA-pretreated plantlets. On the other hand, proline was considerably higher than in control plantlets. After 1 month of ex vitro transfer, survival rate of ABA-pretreated plantlets was 85.6%, which increased by 29.1% in comparison with control (56.5%). More vigorous growth was also observed in ABA-pretreated plantlets. From these results, it was found that application of ABA to the last subculture medium could improve acclimatization and promote survival of mulberry plantlets after ex vitro transfer, inducing water stress tolerance and alleviating abiotic stresses.

• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.167-175
• /
• 2018

정착구의 성능 평가를 위한 대부분의 기존연구와 성능실험들이 ETAG 013 규정에 따라 실험체를 제작하고 실험을 수행한 것으로 명시해오고 있다. 하지만 실험체에 사용된 파열력 보강 철근이나 보조보강철근이 ETAG 013에서 규정된 별도의 승인이 불필요한 최소 철근량을 초과 배치하여 실험이 수행되고 있다. 따라서, 본 논문에서는 ETAG 013 규정에 대한 올바른 이해와 실험을 위해 ETAG 013 규정에서 명시하는 하중전달실험 방법과 성능기준에 대해 고찰하고, 상용화된 PT정착구 시스템을 적용하여 고강도 콘크리트, 고장력 강연선을 변수로 한 실험체를 제작하고 하중전달실험을 수행하여 원형 정착구 시스템의 성능과 보조보강철근의 상관성을 평가하였다. 실험 결과, ETAG 013 규정이 적절한 크기 및 강도의 실험체와 파열력 보강철근을 사용하지 않으면 성능을 만족하지 않는 매우 엄격한 규정임이 확인되었으며, 보조보강철근의 양을 증가 시키는 것이 아니라 실험체의 크기를 최소치수로 한정짓지 않고 규정에 따라 15%크게 적용하는 방법으로 실험을 수행하는 것이 바람직한 것으로 평가되었다.

• The Plant Pathology Journal
• /
• 제32권2호
• /
• pp.136-144
• /
• 2016

Pseudomonas fluorescens pc78 is an effective biocontrol agent for soil-borne fungal diseases. We previously constructed a P43-gfp tagged biocontrol bacteria P. fluorescens pc78-48 to investigate bacterial traits in natural ecosystem and the environmental risk of genetically modified biocontrol bacteria in tomato rhizosphere. Fluctuation of culturable bacteria profile, microbial community structure, and potential horizontal gene transfer was investigated over time after the bacteria treatment to the tomato rhizosphere. Tagged gene transfer to other organisms such as tomato plants and bacteria cultured on various media was examined by polymerase chain reaction, using gene specific primers. Transfer of chromosomally integrated P43-gfp from pc78 to other organisms was not apparent. Population and colony types of culturable bacteria were not significantly affected by the introduction of P. fluorescens pc78 or pc78-48 into tomato rhizosphere. Additionally, terminal restriction fragment length polymorphism profiles were investigated to estimate the influence on the microbial community structure in tomato rhizosphere between non-treated and pc78-48-treated samples. Interestingly, rhizosphere soil treated with strain pc78-48 exhibited a significantly different bacterial community structure compared to that of non-treated rhizosphere soil. Our results suggest that biocontrol bacteria treatment influences microbial community in tomato rhizosphere, while the chromosomally modified biocontrol bacteria may not pose any specific environmental risk in terms of gene transfer.

• 한국가스학회지
• /
• 제15권2호
• /
• pp.82-87
• /
• 2011

열매체유는 화학공장의 가열시스템, 열교환 시스템, 가스플랜트 공정, 사출성형 시스템 및 펄프제지 공정 등에 사용된다. 열매체유는 고열이나 산화분해에 아주 안정하고 저항성이 있으며, 누출이나 방출의 경우 점화원을 만나면 쉽게 발화한다. 본 논문은 열메체유의 신유와 사용유에 대해 인화성과 열적 안정성을 고찰하였다. 열매체유의 인화성은 인화점과 자연발화점을 측정하여 평가하였고, 열적안정성은 열안정성시험기와 시차주사열량기를 사용하여 평가하였다. 실험결과로부터 열매체유의 적절한 사용과 취급과 관련된 안전대책 수립을 위해 화재 위험 특성을 제시하였다.