• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1505-1508
• /
• 1994

Lately in KEPCO, the power plant capacity has increasingly become larger than before and it has become difficult to get R.O.W for T/L. Therefore KEPCO decided to increase its system voltage level from 345kV to 765kV. By doing this, KEPCO would like to expand its transmission capability by less T/L route. In 765kV system, we should consider various kinds of environmental impacts that can be neglected in lower voltage level. These environmental impacts are very important factor in T/L design. That can be changed greatly according to the selected conductor. And also conductor selection has relation with the economy of T/L construction directly. This paper deals with some general factors to be considered and basic principles about the conductor and ground wire selection for 765KV T/L with referring to the experiences of foreign utilities.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.1 s.35
• /
• pp.66-77
• /
• 2007

With the electricity industry structure reformation of the government in April, 2001, Korea Power Electric Corporation was divided in to Korea water power nuclear power and 5 thermal power plant. After, various delivery method is introduced and applied for active profit creation according to the competition between each development companies for the public company privatization. However, the current situation does not satisfy the project participant by selecting the delivery method without reflecting the business goal and project characteristics of power plant construction business. The objective of this study is to research the influencing factors that should be considered to select the delivery method in thermal power construction business and develop a standard of selection of appropriate delivery method through questionnaire and interviews to establish a model to select the delivery method that fits the business goal of the subject of delivery. In the future, if the delivery method selection model suggested in this study is applied, it is expected to select the appropriate delivery method of power plant construction business by effectively reflecting the business goal, characteristics and demand of the delivery subject, and characteristics of the construction business apart from the existing customary practices that decided the delivery method dependent on the subjective and experience based judgement.

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.329-333
• /
• 2001

The study was performed to investigate the effect of a plug culture method in the early stage of a potato breeding program. The 105, 200 and 288-cell plug trays were used for raising potato seedlings. The % germination in plug trays ranged between 94 and 96%. Percent tuberization measured at 50 and 60, and 70 days after sowing was the greatest in 105-cell and 200-cell trays, respectively. However, tuberization was most delayed in 288-cell trays. Thus, it is considered that 105-cell tray is the most effective for the selection of early maturing plants. Plant maturity was determined by the morphological characteristics at the seedling stage of stolons cultured in plug trays. Most of seedlings with shorter stolons at seedling stage (1st generation) were the early-maturing, while most of seedlings with longer stolons were the late-maturing at the clonal stage (2nd generation). These results mean that the plant maturity in the early potato breeding program can be effectively grouped by observing the morphological characteristics of stolons after plug culture.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.19
• /
• pp.83-99
• /
• 1975

The earliness to flowering was completely dominant over the lateness, and the short plant height and stem length were partially dominant over the tall. The heavy stem weight, however, was recessive to the light. Heritability values for the flowering period, plant height, dry stem weight and fiber ratio were high, while those of days to initial flowering, stem length and fiber weight were low. Flowering period, plant height, stem weight, dry stem weight and fiber ratio were closely related to fiber weight or fiber yield. The selection index estimated jointly the plant height ($X_1$), dry stem weight($X_2$) and fiber weight($X_3$); that is 0.0020$X_1$-0.0047$X_2$-0.0181$X_3$, was the most efficient one for the selection practices. The plant height was the most reliable character for the increased genetic advances and the relative selection efficiences. Effects of locations and genotype-environment interactions were highly significant in most of the characters investigated.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.5
• /
• pp.98-106
• /
• 2014

This study was carried out to evaluate the plant growth rate according to the wavelength characteristics of LED light sources. In order to achieve this, red, green, blue and white LEDs were arrayed in a rectangle array consisting of LED modules which can be combined with each other.. This can facilitate the selection of the optimal characteristics of the light from monochromatic red, green, blue and white LEDs or mixed LEDs for plant growth. Experiments to evaluate the growth rate according to the wavelength characteristics of the LEDs with several plants, in this case ice plants, lettuce, barley, broccoli and chives, were performed.

• Journal of Plant Biotechnology
• /
• v.4 no.4
• /
• pp.135-141
• /
• 2002

Agrobacterium-mediated transformation has been unsuccessful for monocot plants except for a few important crops such as barley, rice, maize and wheat. We discussed here that a successful transformation of monocots demands certain critical conditions. The requirements for an efficient transformation are a selection of target tissues competent for plant regeneration and Agrobacterium-infection, and various factors promoting Agrobacterium-infection. The factors were divided into two to activate Agrobacterium and to increase plant cell's susceptibility against Agrobacterium. Optimization of these factors significantly increased transformation efficiency of zoysia grass and rice plants. A technical improvement in transformation system for monocots will promote improvement of the breed as well as a study of gene functions in monocots.

• The Plant Pathology Journal
• /
• v.16 no.5
• /
• pp.247-251
• /
• 2000

Latent infections of healthy-appearing oaks of Hypoxylon atropunctatum complicates field studies by interfering with inoculation experiments to follow pathogenesis, fungal development and reproduction of this canker rot fungus. Mutants with unique and easily scorable phenotypes would be useful for inoculation studies. There is a broad range in the capacity of wild-type isolates to utilize nitrate as a sole nitrogen sources. Several types of nitrate-nonutilization mutants (nit1, Nit3, NitM) were selected from nitrate-utilizing wild-type isolates. Also, a few mutants of Hypoxylon atropunctatum were selected that could only grow poorly on basal medium supplemented with various nitrogen sources and even on yeast extract agar. These unknown mutants need to be characterized further. Nit mutants of Hypoxylon atropunctatum were readily selected, grew well and were recovered after inoculation into oak stems. These results suggest that nit mutants could be useful for inoculation studies in trees that contain latent infections.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2005.11a
• /
• pp.112-119
• /
• 2005

Efficient plant regenerationsystem from cell suspension cultures was established in D. acicularis (2n = 90) by monitoring ploidy level and visual selection of the cultures. The highly regenerable cell lines selected maintained original ploidy level and consisted of compact cell clumps with yellowish color and relatively moderate growth, suggesting that it is possible to select visually the highly regenerable cell lines with the original ploidy level. All the regenerated plantlets from the highly regenerable cell cultures exhibited normal phenotypes and no variations in ploidy level were observed by flow cytometry (FCM) analysis.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.3
• /
• pp.279-283
• /
• 2011

The immature embryos during seed development were examined to predict the suitable embryos for an efficient regeneration system. Five spring wheat genotypes and five winter wheat genotypes were tested using immature embryos as explants. Spring wheat genotypes showed much higher levels of plant regeneration than those of winter wheat genotypes. The highest frequencies of embryogenesis and regeneration were obtained when embryos at 13-14 days after anthesis (DAA) were used as explant and decreased using embryos at 21-22 DAA during seed development. Significant differences were also found for callus induction and regeneration as affected by immature embryo size. The regeneration efficiency was drastically decreased in spring and winter wheat genotypes when embryos larger than 2.0 mm of length were used. The optimum developmental stage and embryo length for regeneration efficiency were at 13-14 DAA and 1.0-1.5 mm, respectively. The selection of suitable embryos for the high frequencies of embryogenesis and regeneration leads us to efficient genetic improvement of wheat.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.3
• /
• pp.62-73
• /
• 2008

This paper was conducted to acquire the scientific data for the waste landfill greening. The native plant flora was investigated in waste landfill at Nanjido. As a result, total 40 species, 22 families, 32 genus were classified. The dominant species were Robinia pseudoacacia (15%), Populus euramericana (3%), and Populus monilifera (1%), ect. Naive plant of 6 species (Zoysia japonica, Aster koraiensis, Liriope platyphylla, Hemerocallis fulva, Sedum kantschaticum, Indigofera pseudotinctoria) were planted in waste landfill in one species per 1 $m^2$ for greening purpose. After One year planting, the ornamental optimum value was showed in Zoysia japonica, Aster koraiensis, Hemerocallis fulva, Hemerocallis fulva, Sedum kantschaticum. The covering rate after nine months planting was 85% and 80% for Zoysia japonica and Hemerocallis fulva, respectively. While Aster koraiensis(a) 13 %, Liriope platyphylla 8 % and Sedum kantschaticum appeared 22 % were obtained. Aster koraiensis (a) has highest height and Sedum kantschaticum was the shortest plant.