• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.89-94
• /
• 2016

This study was conducted to determine the optimum nutrient solution, pH, irrigation interval, light intensity and planting density to growth of common ice plant (Mesembryanthemum crystallinum L.) in a closed-type plant production system. Three-band radiation type fluorescent lamps with a 12-h photoperiod were used. Nutrient film technique systems with three layers were used for the plant growth system. Environmental conditions, such as air temperature, relative humidity and $CO_2$ concentration were controlled by an ON/OFF operation. Treatments were comparison of the nutrient solution of Horticultural Experiment Station in Japan (NHES) and the nutrient solution of Jeju National University (NJNU), pH 6.0 and 7.0, irrigation interval 5 min and 10 min, light intensity 90 and $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, and within-row spacing 10 cm, 15 cm, 20 cm and 25 cm with between-row spacing 15 cm. Optimum macronutrients were composed N 7.65, P 0.65, K 4.0, Ca 1.6 and Mg $1.0mM{\cdot}L^{-1}$. There were no significant interactions between pH 6.0 and 7.0 about shoot fresh weight and shoot dry weight of common ice plant. Irrigation interval 5 min and 10 min was also the same result. Shoot fresh weight and shoot dry weight were highest at $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Shoot fresh weight and shoot dry weight were decreased according to increasing the planting density. From the above results, we concluded that optimum nutrient solution, optimum levels of pH, irrigation interval, light intensity and planting density were 6.0-7.0 and 10 min, $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and $15{\times}15cm$, respectively for growth of common ice plant in a closed-type plant production system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.7
• /
• pp.591-597
• /
• 2012

For the past few years, the concern for clean energy has been greatly increased. Ocean thermal Energy Conversion(OTEC) power plants are studied as a viable option for the supply of clean energy. In this study, we examined the thermodynamic performance of the OTEC power system for the production of electric power. Computer simulation programs were developed under the same condition and various working fluids for closed Rankine cycle, regenerative cycle, Kalina cycle, open cycle, and hybrid cycle. The results show that the regenerative cycle showed the best system efficiency. And then we examined the thermodynamic performance of regenerative cycle OTEC power system using the condenser effluent from Uljin nuclear power plant instead of the surface water. The highest system efficiency of the condition was 4.55% and the highest net power was 181 MW.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.spc
• /
• pp.20-28
• /
• 2009

The sustainability of conventional agriculture which is characterized by input dependent and ecologically simplified food production system is vague. Chemicals and present practices used in agriculture are not only costly but also have widespread implications on human and animal health, food quality and safety and environmental quality. Thus there is a need for alternative farming practices to sustain food production for the escalating population and conserve environment for future generations. The present research scenario in the area of plant microbe interactions for maintaining sustainable agriculture suggests that the level of internal regulation in agro-ecosystems is largely dependent on the level of plant and microbial diversity present in the soil. In agro-ecosystems, biodiversity performs a variety of ecological services beyond the production of food, including recycling of nutrients, regulation of microclimate and local hydrological processes, suppression of undesirable organisms and detoxification of noxious chemicals. Controlling the soil microflora to enhance the predominance of beneficial and effective microorganisms can help improve and maintain soil chemical and physical properties. The role of beneficial soil microorganisms in sustainable productivity has been well construed. Some plant bacteria referred to as plant growth-promoting rhizobacteria (PGPR) can contribute to improve plant growth, nutrient uptake and microbial diversity when inoculated to plants. Term PGPR was initially used to describe strains of naturally occurring non-symbiotic soil bacteria have the ability to colonize plant roots and stimulate plant growth PGPR activity has been reported in strains belonging to several other genera, such as Azotobacter, Azospirillum, Arthrobacter Bacillus, Burkhokderia, Methylobacterium, and Pseudomonas etc. PGPR stimulate plant growth directly either by synthesizing hormones such as indole acetic acid or by promoting nutrition, for example, by phosphate solubilization or more generally by accelerating mineralization processes. They can also stimulate growth indirectly, acting as biocontrol agents by protecting the plant against soil borne fungal pathogens or deleterious bacteria. Present review focuses on some recent developments to evolve strategies for better biotechnological exploitation of PGPR's.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2244-2252
• /
• 2022

Based on GIS technologies, a decision support system (GIDSS) has been developed to remediate agricultural lands in the Bryansk region (Russia) contaminated by ¹³⁷Cs after the accident at the Chernobyl nuclear power plant. GIDSS is a multilevel system consisting of basic, information and computational layers. GIDSS allows justifying a targeted approach for the remediation of agricultural lands belonging to agricultural enterprises for the production that meets the established radiological requirements for the content of radionuclides. Evaluation of the effectiveness of alternative remediation technologies and the selection of optimal measures were carried out at the level of elementary plots using radiological criteria. The introduction of GIDSS will enable agricultural producers in the south-western districts of the Bryansk region to conduct radiation-safe agro-industrial production in radioactively contaminated areas, which will help improve the socio-economic situation of the region and return it to normal living conditions.

• Journal of Plant Biotechnology
• /
• v.37 no.3
• /
• pp.243-249
• /
• 2010

Molecular farming is production of pharmaceutically and industrially important proteins in plants. Plants and plant cell culture systems have been used as bio-factory to produce recombinant proteins such as monoclonal antibodies, enzymes, vaccines, hormones, interleukins, commercial enzymes and etc. The terms molecular farming, biofarming, molecular pharming, phytomanufacturing, recombinant or plant-made industrials, planta-pharma, plant bioreactors, plant biofactory, and pharmaceutical gardening are used interchangeably. Molecular farming can provide safe and inexpensive pharmaceutical proteins as well as commercial ones. In spite of several advantages of molecular farming such as safety and inexpensive cost, there are also a couple of drawbacks in the existing technology. One of them is low expression level of target gene in plants, which has been improved by optimizing gene-based codon usage, screening of strong promoters, expression of transcription factors, subcellular targeting of target proteins, chloroplast transformation, and transient expression using viral expression system (magnifection). Some plant-based commercial proteins have already been in markets and more than twenty plant-based pharmaceuticals have been in clinical trials, from that we can expect that several plant-based pharmaceutical proteins will be seen in the markets in the near future.

• Journal of Plant Biotechnology
• /
• v.46 no.1
• /
• pp.17-21
• /
• 2019

Ginger is an important monocotyledonous plant belonging to the family Zingiberaceae. The objective of this study was to investigate the regeneration potential of ginger using leaf base explants. Auxins such as 2, 4-D and NAA in combination with BA were used for initiation of callus. Different combinations of both ammonium ($NH^{4+}$) and nitrate ($NO^{3-}$) were also studied for efficient callus production. High frequency of white friable calli was observed on modified Murashige and Skoog (MS) medium supplemented with 2.0 mg/L 2, 4-D, 0.5 mg/L NAA and 0.5 mg/L BA. The highest shoot induction (92.33%), shootlets number ($7.33{\pm}0.33$) and length ($88.33{\pm}4.40$) mm were achieved on MS media containing 0.5 mg/L BA. Regenerated shoots were transferred to in vitro rooting media containing 1.0 mg/L IBA. Afterwards, plantlets with well-developed root and shoot system were subjected to a twostep hardening process. 71% of plantlets survived after secondary hardening without any abnormal morphology.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.10
• /
• pp.1533-1543
• /
• 2020

Plant-based meat analogues, edible insects, and cultured meat are promising major meat alternatives that can be used as protein sources in the future. It is also believed that the importance of meat alternatives will continue to increase because of concerns on limited sustainability of the traditional meat production system. The meat alternatives are expected to have different roles based on their different benefits and limitations. Plant-based meat analogues and edible insects can replace traditional meat as a good protein source from the perspective of nutritional value. Furthermore, plant-based meat can be made available to a wide range of consumers (e.g., as vegetarian or halal food products). However, despite ongoing technical developments, their palatability, including appearance, flavor, and texture, is still different from the consumers' standard established from livestock-based traditional meat. Meanwhile, cultured meat is the only method to produce actual animal muscle-based meat; therefore, the final product is more meat-like compared to other meat analogues. However, technical difficulties, especially in mass production and cost, remain before it can be commercialized. Nevertheless, these meat alternatives can be a part of our future protein sources while maintaining a complementary relationship with traditional meat.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.302-306
• /
• 2006

The improvement of load following operation of the thermal power plant is influenced to the electrical quality. Analysis of boiler, turbine, and governor system, and the study of control algorithm are necessarily preceded. The thermal power plant is operated by various control systems. In the case of faulty governor system, it takes long days to solve the problem and impossible to repair the mechanism without outage. A non-planned outage is taken into consideration because of economical power production. The paper introduces the followings; In case of system-frequency drop during long term, at 500MW thermal power plant, the generator output was drop. To clear this problem, the control logic is modified with analysis of trend and control algorithm. As a result system frequency drop is prevented during the long tenn and the electric grid operation is improved.

• KSBB Journal
• /
• v.28 no.4
• /
• pp.260-268
• /
• 2013

Transgenic plant cell cultures are an attractive expression system for the production of industrial and pharmaceutical proteins because of their advantages in safety and low production cost. Human cytotoxic T-lymphocyte antigen 4-immunoglobulin (hCTLA4Ig) was produced and secreted when sugar was depleted in culture medium by transgenic rice cell lines (Oryza sativa L.) using RAmy3D promoter. Due to the production of the target protein by sugar depletion, concomitant occurrence of cell death is inevitable. For that reason, inhibition of cell death for enhancing productivity was necessary for the production period without energy sources. Supplementation of 0.1 mM sodium nitroprusside improved cell viability by 1.4-fold and maximum hCTLA4Ig production by 1.3-fold compared to those of control. Addition of 1 and 10 mM glutathione, N-acetylcysteine (NAC), and nicotinamide inhibited apoptotic-like programmed cell death by decreasing the activity of reactive oxygen species. Production hCTLA4Ig was enhanced 1.4-, 1.25-, and 1.15-fold with 10 mM NAC, 1 mM NAC, and 1 mM glutathione, respectively. In addition, it was found that the supplementation of NAC enhanced the cell viability.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.181-186
• /
• 2002

Laser welding application for car body manufacturing has many advantages in the stiffness and the lightness of vehicle, the productivity of assembly line, and the degree of freedom in design. This presentation will express the innovation of car body manufacturing including parameter optimization, process modeling, and system integration. In this application the investment for systems was cut down dramatically by real time switching over the laser path between two welding stations. Points of technical discussion are as follows: optimization of parameters such as laser power, robot speed and trajectory, compact and useful design of jig & fixture to assure welding quality for 3 sheet-layer zinc-coated steel, system integration between 4kW Nd:YAG laser device and the other systems, on-line real time welding quality monitoring system, perfect safety standards for high power laser, minimization of consumption costs such as arc lamp, protective glass for optic, etc. Laser welding has found a place on Hyundai's production plant in conjunction with the startup of mass production of new sports car, and this production system is the result of a collaboration of its engineers. Outer side sheets are joined to inner side sheets by 122 stitch welds totally. And the length is about 2.4meter.