• 전기의세계
• /
• 제16권4호
• /
• pp.41-49
• /
• 1967

This paper covers an estimation and analysis of generating cost of 350MWe nuclear power plant using a pressurized water reactor on the assumption that such a nuclear power plant would be constructed in Korea in or around 1970. For the evaluation of this generating cost, an extensive study has been conducted based on the current information on operating and costing parameters of light water reactors, particularly those of pressurized water reactors. Based on this study, a total generating cost of 7.29 Mills/Kwh was evaluated by operating the plant at 80% plant factor. For this calculation, a steady state method was introduced. It is considered, therefore, that a total generating cost in the beginning of plant operation would be a little higher than 7.29 Mills/Kwh, which has been calculated in the state of equilibrium.

• 제어로봇시스템학회논문지
• /
• 제16권12호
• /
• pp.1189-1196
• /
• 2010

This paper provides an identification method for three-parameter models i.e. first order with dead time models and second order with dead time models. The proposed identification method is based on step response and can be easily implemented using digital microprocessors. The proposed method first identifies the order of the plant i.e. first order or second order from the behavior of the plant with constant input. After the order of the plant is determined, a test step input is applied to the system and the three parameters of the plant are obtained from the corresponding response of the plant. The output of the plant need not to be zero when the test signal is applied. The efficacy of proposed algorithms is verified through simulation and experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.627-628
• /
• 2006

• The Plant Pathology Journal
• /
• 제27권2호
• /
• pp.164-169
• /
• 2011

Previous studies have addressed the management of phyllosphere pathogens by leaf and root-associated microbes. The present study evaluated the effect of the foliar application of three strains of Bacillus spp. on plant growth and fruit quality. The application of a bacilli spore preparation significantly improved leaf growth parameters such as leaf thickness and photosynthesis capacity, indicating that bacilli treatment directly promoted leaf growth. In addition, foliar treatment resulted in an improvement in the key indicators of fruit quality including water, glucose, and sucrose contents. The present results suggest that foliar spraying of beneficial bacilli is a potential treatment of wide application for the improvement of apple quality. Foliar application of bacilli preparation as effective plant growth-promoting rhizobacteria broadens the spectrum of their availability for orchard application.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2069-2074
• /
• 2016

This paper presents a methodology based on evolutionary optimization for simultaneously optimizing design parameters of controller and components of plant. Genetic programming(GP) based bond graph model generation is adopted to open-ended search for the plant. Also GP is applied to represent the controller with a unified method. The formulations of simultaneous plant-controller design optimization problem and the description of solution techniques based on bond graph are derived. A feasible solutions for a plant/controller design using the simultaneous optimization methodology is illustrated.

• 한국미생물·생명공학회지
• /
• 제33권1호
• /
• pp.56-64
• /
• 2005

고도처리장의 효율적 운영을 위해 원생동물의 분포를 조사하고 수질자료의 예측을 위한 bioindicator의 가능성을 분석하였다. 원생동물 종류별 개체수 분포는 출현빈도가 높으면 개체수도 많은 편으로 관찰되었다. Aspidisca, Trachelophyllum, Vorticella, Cinetochiluum, Oikomonas, Epistylis의 출현빈도는 $95\%$이상이었다. 처리장의 원생동물 분포는 유입수의 성상과 운영조건 차이 등이 세균의 증식에 영향을 미치고 변화된 세균분포에 적합하게 원생동물 분포가 이루어진다고 판단된다. 미생물분포와 통계결과는 처리장마다 다르므로 여러 처리장보다는 단일처리장에 적용되는 지표개발이 처리장의 효율적 운영에 기여할 수 있다. 요인분석결과 요인적재량의 형태와 요인의 해석이 유사하였다. 고도처리공법이 유사하고, 유입수의 성상이 비슷하여 처리장운영에 관여하는 요인이 비슷하게 나타난 것으로 판단된다. 상관분석과 회귀방정식을 이용함으로 처리장 수질변화를 미리 예상할 수 있다. 처리장의 원생동물 분포, 유출수질, 운영조건 자료들이 충분히 확보되면 원생동물 분포를 가지고 운영현황 및 가까운 미래의 수질예측이 가능해진다. 수질예측이 가능함으로 운영조건의 조기변동으로 처리수질을 양호하게 유지할 수 있다.

• 대한환경공학회지
• /
• 제28권4호
• /
• pp.389-396
• /
• 2006

고도폐수처리장의 원생동물의 분포를 주별로 조사하였다. 통계방법을 이용하여 원생동물의 개체수와 운영조건, 유출수질을 분석하였다. 유입수의 성상과 처리장의 운영조건에 영향을 받아 처리장별로 원생동물 분포가 다르게 나타났다. 통계분석을 통해, 원생동물의 분포로 현재 운영중인 처리장의 운영조건을 알 수 있고 가까운 미래의 유출수질을 예측할 수 있었다. 처리장의 원생동물 분포, 유출수질, 운영조건 자료들이 충분히 확보되면 원생동물 관찰에 의해 처리장의 운영현황 및 가까운 미래의 수질예측이 가능해진다. 수질예측이 가능함으로 운영조건을 조기변동 하여 처리수질을 양호하게 유지할 수 있다. 장기적으로는 가장 좋은 유출수질때 나타나는 원생동물의 분포를 얻을 수 있도록 처리장의 운영조건을 변경함으로 좋은 유출수질을 얻을 수 있다.

• 식물병연구
• /
• 제29권2호
• /
• pp.137-144
• /
• 2023

Exserohilum turcicum is a fungus that causes northern corn leaf blight (NCLB) and has deleterious effects on maize production globally. Therefore, it is prudent to mitigate the effects of NCLB using genetic diversity. The objective of this research was to assess the severity of NCLB disease on the growth and yield of various maize genotypes. A randomized complete block design field experiment, replicated three times, was conducted to evaluate the effect of E. turcicum on 10 maize hybrids. Percent disease index, plant height, and leaf area were recorded at the silk stage. Cob weight, grain fresh weight, and grain yields were determined at harvest maturity. All measured parameters were significantly different (P<0.05) between the maize hybrids. Of the 10 genotypes, four (PAN 4R-528R, PAN 4R-728BR, PAN 3R-724BR, and P1788BR) were susceptible, five (DKC74-74BR, PAN 5R-582R, PAN 5R-890R, PAN 5R-854R, and PAN 5R-590R) were moderately susceptible, and one (DKC80-40BR) was moderately resistant. DKC80-40BR exhibited greater cob weight, while DKC74-74BR was superior in all other plant growth and yield components. Interestingly, although not significant (P>0.05) and high, maize growth and yield parameters had negative correlations with disease incidence, except for grain fresh weight. Therefore, DKC80-40BR may be selected for cultivation in areas prone to NCLB to reduce maize susceptibility to the disease, while DKC74-74BR may improve crop performance. These hybrids could be considered as potential sources of resistance or tolerance to NCLB for further validation by plant breeders.

• Journal of Welding and Joining
• /
• 제21권7호
• /
• pp.42-48
• /
• 2003

Welding distortion is a current issue in many industrial parts, especially for heavy industry such as shipbuilding, plant industry. The welding process has many processing parameters influencing welding angular distortion such as heat input power, welding speed, gas flow rate, plate thickness and the welded material properties, etc. In this work, the conventional local minimization concept was applied to find a set of optimum welding process parameters, consisted of welding speed, plate thickness and heat input, for a minimum angular distortion. An analytic solution for welding angular distortion, which is based on laminated plate theory, was also applied to investigate and optimize the welding process parameters. The optimized process parameters and the angular distortion for various parametric conditions could be easily found by using the local minimum concept.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.176-181
• /
• 1992

In this paper, an adaptive generalized predictive control(GPC) algorithm which minimizes a N-stage cost function is proposed. The resulting controller is based on GPC algorithm and can be used in unknown plant parameters as the parameters of one step ahead predictor are estimated by recursive least squares method. The estimated parameters are extended to G,P, and F amtrix which contain the parameters of N step ahead predictors. And the minimization of cost function assuming no constraints on future controls results in the projected control increment vector. Hence this adaptive GPC algorithm can be used for either unknown system or varing system parameters, and it is also shown through simulations that the algorithm is robust to the variation of system parameters. This adaptive GPC scheme is shown to have the same stability properties as the deterministic GPC, and requires small amount of calculation compared to other adaptive algorithms which minimize N-stage cost function. Especially, in case that the maximum output horizon is 1, the proposed algorithm can be applicable to direct adaptive GPC.