• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.503-515
• /
• 2014

A lot of existing wastewater treatment plants (WWTPs) are rebuilt or retrofitted for advanced wastewater treatment processes to cope with reinforced effluent criteria of nitrogen and phosphorous. Moreover, how to treat the wasted sludge from WWTPs has been also issued since the discharge of the wasted sludge into ocean is impossible from 2011 due to the London Convention 97 protocol. These trend changes of WWTPs get a motivation to assess environmental and economic impacts from the construction stage to the waste stage in WWTPs. Therefore, this study focuses on evaluation of environmental and economic impacts of the advanced wastewater treatment processes and waste sludge treatment process by using life cycle assessment. Four advanced wastewater treatment processes of Anaerobic/Anoxic/Oxic ($A_2O$), 5 stages-Bamard Denitrification Phosphate (Bardenpho), Virginia Initiative Plant (VIP), and Modified University of Cape Town (MUCT) are chosen to compare the conventional activated sludge (CAS) and three waste sludge treatment methods of land fill, incineration, and composting are used. To evaluate environmental and economic impacts of each advanced wastewater treatment processes, life cycle assessment (LCA) and life cycle cost (LCC) are conducted based on International organization for standardization (ISO) guidelines. The results clearly represent that the $A_2O$ process with composting shows 52% reduction in the environmental impact than the CAS process with landfill. On the other hand, the MUCT process with composting is able to save 62% of the life cycle cost comparing with the CAS process with landfill. This result suggested the qualitative and quantitative criteria for evaluating eco-environmental and economic technologies of advanced treatment processes and also sludge treatment method, where their main influence factors on environmental and economic impacts are analyzed, respectively. The proposed method could be useful for selecting the most efficient and eco-friendly wastewater treatment process and sludge treatment method when retrofitting the existing WWTPs to advanced treatments.

• ALGAE
• /
• v.25 no.4
• /
• pp.187-195
• /
• 2010

The genus Rosenvingea is well known in the tropics. Four species have been reported from Pacific Mexico: R. floridana, R. antillarum, R. intricata and R. sanctae-crucis. We collected a plant (Boca del Cielo, Chiapas) that we identified as Rosenvingea orientalis, a species not previously reported from Pacific Mexico. We were able to characterize the life cycle of this species for the first time in laboratory culture. It reproduced exclusively by plurilocular sporangia (plurangia). The mature plants were up to 6 cm long with cylindrical to compressed fronds (to 2 mm wide) with dichotomous branches in the upper half of the thallus. The medulla was hollow with 2-3 layers of large inflated colourless cells at the periphery. The cortex was comprised of 1 layer of small cells, each with a single chloroplast and pyrenoid. Linear plurangial sori with phaeophycean hairs formed along the mature fronds. Zoospore germlings developed into prostrate filamentous systems, each with a single phaeophycean hair that gave rise to a single erect shoot with multiple hairs arising near the tip. Molecular phylogeny using the psaA gene placed this isolate within the Scytosiphonaceae. It does not confirm the exact identification of R. orientalis, although its placement close to other Rosenvingea sequences was confirmed and morphological evidence supports its placement in R. orientalis. Our culture investigations indicated that it has an asexual life cycle. Further collections are needed to resolve the full generic and specific relationships of Rosenvingea and related taxa, and their reproductive patterns.

• Journal of Life Science
• /
• v.16 no.4
• /
• pp.699-703
• /
• 2006

Maize (Zea mays L.) is a monoecious plant, which separates male (tassel) and female (ear) floret that evolved into increasing heterogeneity. In each floret, male or female, bears both one pistil and three stamens primodia before diverged to unisexual state. When diverged to tassel, pistil cell death occurs in the pistil primodium, which is mediated by TASSELSEED genes. In contrast, cell protection occurs in the ear pistil from TASSELSEED-mediated cell death, which is mediated by SILKLESS1 gene. On the other hand, cell cycle arrest occurred for a long time in the ear stamens and then the stamens eventually dye. The cell cycle regulating genes such as CYCLIN B and WEE1 are involved in this process. Furthermore, the temporal and spatial regulation of gibberellin biosynthesis may cause cell cycle block in arresting stamen cells. This review describes the cell death, cell protection, and cell cycle arrest mechanism during maize sex determination process at the molecular, cellular and developmental biology, and genetic levels.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.21 no.1
• /
• pp.133-137
• /
• 2010

The perilla leaf pyralid moth, Pyrausta panopealis Walker (Lepidoptera: Pyralidae), is a serious pest damaging to leaf perilla. In order to establish the life parameters of P. panopealis for eventual purpose of control, the developmental span of each stage was investigated under five temperature regimes ($20^{\circ}C{\sim}30^{\circ}C$). The larval period of P. panopealis was longest as 26.8 days at $20^{\circ}C$ and shortened as temperature goes up to $30^{\circ}C$ as 11.3 days. Survivorship of the larval P. panopealis was the highest at $27.5^{\circ}C$ as 82.5%, whereas that of other temperatures ranged from 40% ($20^{\circ}C$) to 60.0% ($30^{\circ}C$), indicating that the P. panopealis appears to favor somewhat higher temperature. In addition to larval period, the duration of egg, prepupal, and pupal period also were shortened sharply as temperature goes up, whereas the duration of adult stage shortened a maximum of only two days as temperature goes up. After the perilla leaf pyralid moths were successfully stabilized in indoor environment the larvicidal efficacy of ten on-the-market environmentfriendly agricultural materials (EFAMs) that were previously selected from the result of other moth species was tested. Seven of the ten tested showed more than 90% of mortality within 12 hrs and reached nearly up to 100% within 24 hrs, but the remaining three showed less than ~70%.

• Research in Plant Disease
• /
• v.19 no.4
• /
• pp.281-287
• /
• 2013

In surveys of weed occurrence undertaken from 2006 to 2007, near to the Daegu experimental fields of the National Institute of Crop Science, plants belonging to 31 families, 74 genera and 96 species were found. For the investigation of the natural or alternative hosts of Soybean yellow mottle mosaic virus (SYMMV), 495 plant samples belonging to 26 families 84 species were subjected to RT-PCR. SYMMV was detected only from legume plants such as Glycine soja, Vigna angularis var. nipponensis, Trifolium repens, and Lespedeza cuneata. Among legume plants tested, more than a third of G. soja (wild soybean) contained SYMMV, indicating that the wild soybean played an important role as a reservoir of SYMMV. Wild soybeans may be infected with SYMMV as early as mid-July. Considering the results of early infection and the high infection rate of seed and seed transmission of SYMMV in G. soja, wild soybeans may have played an important role in the completion of disease cycle of the virus.

• 한국균학회소식:학술대회논문집
• /
• 2015.05a
• /
• pp.23-23
• /
• 2015

Plasmodiophora brassicae is a major disease threat for Brassica oil and vegetable crop production worldwide. The causal agent is a Plasmodiophorid, which are obligate biotrophic plant-pathogenic protists in the Rhizarian kingdom. Although the Plasmodiophorids include other important agricultural pathogens such as Polymyxa betae, Spongospora subterranea, their biology remains poorly understood due to their intracellular biotrophic life style. I will present the assembled and annotated genome of P. brassicae, with insights into developmental stage-specific. We provide the first genomic data for pathogenic Rhizaria. The exploitation of the life stage specific transcripts will shed light in the understanding of the life cycle at a molecular basis, which will in the long run help to understand and control club root disease. Our data also fill an important gap for the understanding of the eukaryotic tree of life, since this is only the third genome of the eukaryotic kingdom of Rhizaria.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.148-153
• /
• 2004

This paper represents that parts of a large generator operating in 1000 MW are affected by centrifugal forces due to high-speed rotation in 3600 rpm and 3D FEM Analyses are required to obtained the structural reliability of the generator. From these results, one would know the weakest locations and the stress distributions. The fatigue life is calculated in order to grasp the remaining life of generator. 2D and 3D analyses are performed to calculate stresses of the generator rotor and the retaining ring. From 2D results, we find the SCF at the slot and sub-slot of the rotor. 3D analysis is applied at the end part of generator rotor, which represents complex geometry, and rotor and retaining ring shrink thermally. With these results, designers of rotor and retaining ring can compare with the results of design code and verify the stress distributions of generator rotor and retaining ring, and then calculate the remaining life from the low-cycle fatigue data.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.73-75
• /
• 2005

The objective of this study is to estimate the feasibility of X-ray diffraction method application for fatigue life assessment of the high-temperature pipeline steel such as main steam pipe, reheater pipe and header etc. in power plant. In this study, X-ray diffraction tests using various types of specimen simulated low cycle fatigue damage were performed in order to analyze fatigue properties when fatigue damage conditions become various stages such as 1/4, 1/2 and 3/4 of fatigue life, respectively. As a result of X-ray diffraction tests for specimens simulated fatigue damages, we conformed that the variation of the full width at half maximum intensity decreased in proportion to the increase of fatigue life ratio.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.37-38
• /
• 2018

BIM(Building Information Modeling) in the architecture, VDC(Virtual Design and Construction) defined CIFE(Center for Integrated Facility Engineering) of Stanford university in USA, and Data-driven design definition issued by TECDOC-1284 of IAEA are doing data-level design generated by 3D CAD technology, integrating and managing related information based on the 3D model, and Using 3D models effectively during nuclear power plant life cycle. 3D model of domestic nuclear power industry is using interference review between design fields, 4D system linked 3D construction model and schedule activity, but the 3D model generated in the design phase is effectively not utilized during the construction, operation, decommissioning. therefore, This study is aimed to suggest 3D model LOD(Level of Detail) advancement method through the analysis of existing literature, 2D drawings, and 3D models throughout nuclear power plant lifecycle.

• Plant Journal
• /
• v.6 no.2
• /
• pp.56-61
• /
• 2010

In this paper, an integrated management software is developed to promote the business competitive power. The interoperability among the software accounts for an ever growing performance of petrochemical plant project. If the interoperability is built up, company has taken advantages of quality, schedule, cost, and safety by active communication. The advantage of an integrated management software is examined in three aspects. In efficiency aspect, It takes advantage of the saving about the various information and the standard of project performance procedure. In quality, the integration gave aid to a quality improvement through team collaboration and data management within project life cycle. In cost, poor communications between systems waste 30% of project costs. If information could be inputted once and used by all, reductions in delivery time up to 40% were possible. Therefore, 10% savings of engineering cost was also possible.