• KSBB Journal
• /
• v.23 no.4
• /
• pp.281-284
• /
• 2008

A simple and efficient microwave-assisted extraction procedure was developed and optimized for the extraction of paclitaxel from the plant cell cultures of Taxus chinensis. The biomass, immersed in a methanol-water mixture, was irradiated with microwaves in a closed-vessel system. The microwave-assisted extraction was compared with the existing conventional solvent extraction in terms of yield, extraction time, and solvent consumption. The use of microwave energy allows rapid recovery of paclitaxel from biomass and dramatically reduces extraction time and solvent usage compared to conventional solvent extraction. The paclitaxel was completely extracted from biomass by microwave-assisted extraction for 3 min at $50^{\circ}C$, for 6 min at $30^{\circ}C$ and $40^{\circ}C$, respectively.

• KSBB Journal
• /
• v.15 no.4
• /
• pp.346-351
• /
• 2000

Several solvents or combinations of solvents were tested for the extraction of wet or dried biomass at different extraction mode from plant cell cultures. Methanol gave the highest paclitaxel recovery with the least amount of solvent usage. before extraction drying of biomass wass helpful to decrease solvent usage in extraction step./ in this case drying method was very important to obtain high yield from dried biomass. In thid mode of operation counter-current extraction process can be able to decrease solvent usage but paclitaxel recovery was almost same with both batch and counter-current mode of operation. The number of extraction times was at least four to obtain high yield(>99%) from cell and one to obtain highyield(>96%) from cell debris in batch mode. Equilibrium (i.e. the ratio of paclitaxel in biomass to paclitaxel in the extraction solvent) was reached within 5 minutes. The minimum methodal concentration (90%) and solvent amount(biomass : solvent=1 Kg : 1L) are enough to obtain high yield(>98%) for extraction from biomass.

• Plant Resources
• /
• v.6 no.3
• /
• pp.221-226
• /
• 2003

To improve industrial scale extraction method for extraction of icariin from Epimedium koreanum Nakai, the yields under different extracting conditions such as solvent, temperature, duration and solvent to plant material weight ratio were compared. Regarding extracting solution, highest extracts and icariin yield could be achieved when 10% EtOH was used. In case of plant material to extracting solvent ratio, no significant differences could be observed from 1/10 to 1/50, indicating 1/10 was the most efficient. Extracting temperature significantly affected extracts and icariin yields in that 9$0^{\circ}C$ increased the collected extracts and icariin contents up to 29.6% and 0.76%, respectively, compared to 27.2%, 0.33% at 7$0^{\circ}C$. The yield of extracts was less dependent upon extracting temperature compared to icariin yield. Regarding extraction time, 4 hr and 6 hr resulted in high extracts and icariin yield, respectively. We found extracting Epimedium koreanum Nakai in 10 times volume of 10% EtOH for 4 and 6 hr at 9$0^{\circ}C$ seem to be relatively efficient methods for extracts and icariin, respectively.

• Korean Journal of Plant Resources
• /
• v.11 no.1
• /
• pp.60-63
• /
• 1998

For the purposed of improving the utilization of natural chemical pigment, carthamin, of Carthamus tinctorius, the effective extraction methods on this compound were pursued in the present study. The best solvent for the extraction was found to be the 1 %(v/v) NaOH solution, at 25 hours. In addition, more carthamin was extracted flowers from main stem than fromb-ranches . The carthamin content of Korean local safflower was shown to be higher than that of Japanese variety used for medicinal uses.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.171-178
• /
• 2013

BACKGROUND: Consensus of heavy metal phytoavailability in soils needs to be introduced for soil management protocols in relation to safer food production in the contaminated agricultural soils. For this, setting up the method for evaluation of metal phytoavailability in soil is an essential prerequisite. METHODS AND RESULTS: The current study was carried to select a proper single extraction method for determination of phytoavailable metal concentration in soil. Two extraction methods were examined including 1 M $NH_4NO_3$ extraction and 0.01 M $Ca(NO_3)_2$ extraction methods using 142 soil samples collected from the agricultural soils nearby abandoned mining area in Korea. Corelation analysis was conducted between phytoavailable metal concentrations and soil properties potentially influencing on the metal phytoavailability. Both methods showed similar significance (p<0.001) in correlation with soil properties such as soil pH. However, higher correlation coefficients between phytoavailable metal concentrations and soil properties were observed when used $Ca(NO_3)_2$ extraction rather than using $NH_4NO_3$ extraction. CONCLUSION(S): It appeared that 0.01 M $Ca(NO_3)_2$ extraction was better option for determination of phytoavailable metals in soils and further study to test the efficiency of this method is required in combination with plant uptake.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.4
• /
• pp.257-263
• /
• 2011

This study investigated the changes of antioxidant activity and ${\alpha}$-glucosidase inhibitory effect of Jerusalem artichoke (Helianthus tuberosus) 100% methanol extracts by various heat treatment. The contents of total phenolic and flavonoid compounds in methanol extract tended to increased gradually with the rise of temperature to 180$^{\circ}C$. The maximum yield of gallic acid (51.52 ${\pm}$ 2.17mg/g extract weight) and quercetin (13.39 ${\pm}$ 0.03mg/g extract weight) were obtained with extraction temperature of 180$^{\circ}C$ for 120min. In addition, the improving extraction efficiency resulted in the increased biological activities, such as electronic donation ability (EDA, 90.36${\pm}$ 0.57%), reducing power (Abs 1.14) and ${\alpha}$-glucosidase inhibitory effect (92.14 ${\pm}$ 1.14%). Overall, the results of this study indicate that the optimum conditions for the extraction process were an extraction temperature at 180$^{\circ}C$ for 120 min, and will provide the basis for future research on the improving extraction yield of phenolic and flavonoid compounds.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.3
• /
• pp.30-40
• /
• 1998

Increasing water consumption produced sludge problems of the water treatment plants. The objective of this study is to investigate aluminium coagulants recovery n acidic and alkaline conditions. Water treatment plant sludge produced in Pusan Metropolitan City were tested for the aluminium extraction process. Experiment samples were obtained in summer from water treatment plants of Deoksan and Myongjang. Aluminium coagulants used in these plants during the test period were polyaluminium chloride(PAC), polyaluminium sulfate organic(PSO), polyaluminium sulfate silicate(PASS). Aluminium contents of water treatment sludge were in the range of 7.2~10.9% of the total solids. The recovery percentages for aluminium and iron by acidic extraction method was evaluated to 88% and 42% respectively. Extracted mass variation for other materials such as iron, manganese, total organic carbon was observed during the extraction operation. Alkaline extraction produced more than two times amount of total organic carbon than that in the acidic extraction process.

• Journal of Plant Biotechnology
• /
• v.46 no.4
• /
• pp.338-345
• /
• 2019

The selection of a suitable solvent is very important when preparing an extract. However, the effect of ethanol solvent concentration in the extraction of sweet wormwood tea has not been reported. Thus, extracts were prepared from sweet wormwood tea using water and various ethanol concentrations, and the phenolic compounds, antioxidants and anti-enzyme activities of the extracts were analyzed. The phenolic acid and flavonoid components differed according to extraction solvent, which also resulted in different antioxidant and antienzyme activities. In particular, flavonoid rhamnetin was not extracted using 80% and 99.5% ethanol and was highest when 60% ethanol was used for extraction. In the case of chlorogenic acid, the highest extraction efficiency was obtained with 80% ethanol. These results suggest the need for research to increase specific extraction efficiency by targeting major compounds that affect physiological activity.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.377-381
• /
• 2016

The Baermann funnel method requires approximately four Kimwipe tissues for research a nematode count under a stereo microscope. To select more efficient and economical nematode extraction paper for nematode extraction, 15 different kinds of tissue papers were tested and compared with Kimwipe tissues. Nematode species used in the extraction efficiency tests include juvenile (J2) of Heterodera sp., J2 of Meloidogyne sp., Pratylenchus sp., Rhabditis sp., Acrobeloides sp., Panagrolaimus sp., Poikilolaimus sp. and Diplogasterida. The extraction efficiency varied between 42.0 to 88.8%. Considering costs, extraction efficacy, and clarity, the Pulling Kitchen Towel (Monalisa Co., Korea) is the best tissue, with clarity A, isolation efficiency of 69.4% (not significantly different compared to Kimwipe 1 ply 88.8%), and 1/2 costs per isolation of Kimwipe 2 ply.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.2
• /
• pp.153-161
• /
• 2016

This study investigated the chemical composition of Solidago virga-aurea var. asiatica Nakai essential oils collected using different extraction methods. The essential oils obtained by simultaneous steam distillation extraction (SDE) and hydrodistillation extraction (HDE) methods from the aerial parts of Solidago virga-aurea var. asiatica Nakai were analyzed by GC and GC-MS. Ninety-nine volatile flavor compounds were identified in the essential oil produced from Solidago virga-aurea var. asiatica Nakai using the SDE method. These compounds were classified into eight categories in terms of chemical functionality: 26 hydrocarbons, 8 aldehydes, 36 alcohols, 7 ketones, 12 esters, 5 oxides and epixides, 4 acids, and a miscellaneous one. Spathulenol (15.66%) was the most abundant compound. Ninety-eight compounds including of 35 hydrocarbons, 6 aldehydes, 29 alcohols, 6 ketones, 10 esters, 4 oxides and epixides, 7 acids, and a miscellaneous one were identified in the essential oil from the plant using the HDE method. Hexadecanoic acid (24.74%) was the most abundant compound. The chemical composition of Solidago virga-aurea var. asiatica Nakai essential oils extracted by SDE and HDE methods are characterized by high content of sesquiterpene alcohols and acids, respectively. The extraction methods may be influenced in the chemical composition of natural plant essential oils.