• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.4
• /
• pp.191-199
• /
• 2013

It is estimated and analyzed that the design wave height and the confidence interval (hereafter CI) according to the return period using the fourteen-year wave data obtained at Pusan New Port. The functions used in the extreme value analysis are the Gumbel function, the Weibull function, and the Kernel function. The CI of the estimated wave heights was predicted using one of the Monte-Carlo simulation methods, the Bootstrap method. The analysis results of the estimated CI of the design wave height indicate that over 150 years of data is necessary in order to satisfy an approximately ${\pm}$10% CI. Also, estimating the number of practically possible data to be around 25~50, the allowable error was found to be approximately ${\pm}$16~22% for Type I PDF and ${\pm}$18~24% for Type III PDF. Whereas, the Kernel distribution method, a typical non-parametric method, shows that the CI of the method is below 40% in comparison with the CI of the other methods and the estimated design wave height is 1.2~1.6 m lower than that of the other methods.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.1
• /
• pp.22-28
• /
• 2017

BACKGROUND: There is very limited knowledge of the effects of biochar derived from exhausted coffee residue on metal adsorption processes. Furthermore, only limited information is available on the adsorption mechanism of copper. The aim of this study was to evaluate the absorption behaviors of copper by biochar derived from exhausted coffee residue. METHODS AND RESULTS: Biochars produced by pyrolysis of exhausted coffee residue at $300^{\circ}C$(CB300) and $600^{\circ}C$(CB600) were characterized and investigated as adsorbents for the removal of copper from aqueous solution. The results indicated that the adsorption equilibrium was achieved around 2 h and the pseudo-second-order kinetic model fit the data better than the pseudo-first-order kinetic model. The maximum Cu adsorption capacities of CB600 by Freundlich and Langmuir isotherms were higher than those of CB300. The adsorption data were well described by a Langmuir isotherm compare to Freundlich isotherm. CONCLUSION: Our results suggest that exhausted coffee residue can be used as feedstock materials to produce high quality biochar, which could be used as adsorbents to removal copper.

• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.98-107
• /
• 2017

A DNA profile database was constructed to investigate the genetic relatedness of 72 germplasm samples of Pyrus and related cultivars using microsatellite markers. Three P. pyrifolia, four P. commus, and one P. betulifolia cultivars with different morphological traits were screened using 387 pairs of microsatellite primers. A core set of 11 primer pairs was selected to obtain 133 polymorphic amplified fragments meeting three criteria: high polymorphism information contents (PIC), high repeatability, and distinct allele patterns. The number of alleles per locus ranged between 4 and 22. Average PIC was 0.743 (range: 0.557 - 0.879). Cluster analysis using the unweighted pair - group method with arithmetical average (UPGMA) separated the 72 pear cultivars and germplasm samples into four major groups: Chinese, European pears, and a cluster of 55 Asian pears that could be reclassify into two subcluster, I - $1^{st}$ and II - $2^{nd}$, according to pedigree information. Almost all of the cultivars were discriminated by 11 microsatellite marker genotypes. The microsatellite DNA profile database may be utilized as tool to verify distinctness, uniformity, and stability between candidate cultivar, and to verify in the distinctness of existing cultivars.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.93-98
• /
• 2008

We investigated the effect on the removal of BOD, SS, TN and TP and algal growth inhibition of Vegetated Artificial Floating Island (VAFI), by examining microorganism activity and nutrient uptake in the batch test of various conditions: (1) Blank (Control group), (2) VAFI of $0.25m^2$, (3) AFI of $0.25m^2$ which has no vegetation, (4) buoyant plate of $0.25m^2$, (5) buoyant plate of $0.25m^2$ with linear media. The proportion of BOD removal in the VAFI, AFI, buoyant plate and buoyant plate with media were 82.7, 80.8, 45.2% and 59.6% respectively. TN removal in the VAFI, AFI and buoyant plate with media were 51.2, 31.7% and 25.1% respectively. TP removal in the VAFI, AFI, buoyant plate and buoyant plate with media were 23.3, 16.7, 10.0% and 13.3% respectively. Chlorophyll-${\alpha}$ removal in the VAFI was 97.9%. The factors of chlorophyll-${\alpha}$ removal in the VAFI accounted for the shading effect of 35.1%, microorganisms activity of 61%, and plant root of 1.8%.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.200-204
• /
• 1980

A series of tests ware conducted to find out whether continuous heat bleaching of the refined Malaysian plam oil stored in different conditions could reduce color of the finished oil in an actual plant situation. When the refined oil was stored in a stainless steel tank and was not abused by heat during 5 month storage period, heat bleaching followed by clay bleaching and deodorization resulted in a substantial reduction in color of the finished oil in comparison to conventional process (clay bleaching of the refined oil followed by deodorization) (2.6 vs 1.3 red in Lovibond color). However, when the refined oil was stored in a carbon steel tank and was highly abused by heat in the presence of iron picked up from the tank (6.53 ppm) during the same storage period, heat bleaching followed by clay bleaching and deodorization did not help reduce color of the finished oil in comparison to the conventional process (2.7 vs 2.8 red in Lovibond color). It was also shown that oxidation values were not good indices for heat bleachability. Heat bleaching caused slight increase in polymer content of the oil. However, trans isomers were not increased when the oil was heat bleached.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.40-47
• /
• 2018

Porous walkway blocks are constructed for the purpose already, but reserved water is easily consumed due to the bigger permeability than necessary. Furthermore, porous structure reduces the strength of blocks, which resulting cracking and settlements in walkways. In this study, we suggested a solution for given problems by determination for the location of minimum principal stress in walkway blocks against moving foot loads in order to design and verifying the determined location of minimum principal stress. An optimum design with a verification example for determined location of minimum principal stress have been presented in a two dimensional Block member on elastic foundation for pedestrian walkway for reserving water inside. The minimum value for sum of shear forces is found when ${\times}1$ is 58.58 mm(30% of total span, 200mm), while the minimum deformation is located at ${\times}2=80mm$(70% of total span, 200 mm). In a modified model, When moving boundary condition(walkway foot loads) is located at ${\times}1$(=0 mm), the location of minimum principal stresses is found at 168 mm( 84% of span, 200 mm), in which the stress concentration due to the foot load is modeled as two layers of distributed loads(reactions of foundation modeled as springs). Consequently, zero deformed reservoirs for rainwater on the neutral axis (${\times}2=167mm$) has been determined in the modified model with three dimensional FEM analysis verifications.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.216-222
• /
• 2011

BACKGROUND: This study was performed to evaluate the effects of environmental factors and heavy metals on the growth and phosphorus removal capacity of Alcaligenes sp., which was well known as one of PAOs(Phosphorus Accumulating Microorganisms). METHODS AND RESULTS: The environmental factors used in this study were temperature, pH and carbon sources, and the heavy metals included Cu, Cd, Zn, As, and Ni. The growth and P removal efficiency of Alcaligenes sp. was maximal as temperature, pH, and carbon source were $25^{\circ}C$, 7, and glucose+acetate, respectively. Also, the $IC_{50}$(median inhibitory Concentration) values of Alcaligenes sp. for the Cu, Cd, Zn, As, and Ni were 5.03, 0.08, 0.73, 282.20 and 4.74 mg/L, respectively. CONCLUSION(S): Based on the results obtained from this study, it appears that the growth and P removal efficiency of Alcaligenes sp. were affected by the environment factors and at the best optimum condition for its growth and P removal efficiency, as the concentrations of heavy metals were gradually increased, its growth was correspondingly decreased.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.78-89
• /
• 2017

Spontaneous combustion propensity of various coals of carbonization grade as a pulverized fuel of coal fired power plant has been tested from an initial temperature of $25^{\circ}C$ to $600^{\circ}C$ by heated in an oven with air to analyze an self oxidation starting temperature. This tests produce a CPT(Cross Point Temperature), IT(Ignition temperature) and CPS(Cross Point Slope) by calculated as the slope of time taken a rapid exothermic oxidation reaction at CPT base. CPS show a carbonization rank dependence, whereby wood pellet has the highest propensity to spontaneous combustion of $20.995^{\circ}C/min$. A subbituminous KIDECO coal shows an CPS values of $15.370^{\circ}C/min$ whereas it of pet coke of the highest carbonization rank has $20.950^{\circ}C/min$. The nature of this trend is most likely a concentration of volatile matter and oxygen functional groups of coal surface that governs the available component for oxidation as well as surface area of fuel char, and constant pressure molar heat.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.267-276
• /
• 2019

The Gonggeomji Reservoir is a historical irrigation facility built in the 8th century and designated as a wetland protected area by Ministry of Environment, Korea. In order to collect the baseline data necessary for developing a sustainable conservation strategy, we investigated the classification of actual vegetation, the vegetation distribution and the floristic structure of the vegetation in the Gonggeomji Wetland Protection Area. In the whole protection area, a total of 26 plant communities were classified including the wetland, riparian, grassland, forest, farmland, and orchard vegetation. According to the results of detrended correspondence analysis, the structure of wetland vegetation was mainly affected by water depth and human disturbance. In reservoir wetlands, floating vegetation such as Utricularia vulgaris var. japonica, Trapa japonica, and emergent vegetation such as Nelumbo nucifera, Typha spp. completely covered the water surface. Since 2014, the reservoir wetland has been terrestrialized with the expansion of emergent and hygrophytic plants. For the sustainable conservation and restoration of wetland protected areas, it is necessary to naturalize the topography and wetland vegetation, recovery the hydrologic system, and restore ecosystem connectivity from wetlands to forests.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.295-303
• /
• 2019

This study investigated the effects of various cultivation pots on Betula platyphylla var. japonica seedlings in order to select suitable pots for the production of healthy seedlings for the ecological revegetation. We used six types of the pots natural pot, natural pot with inside 5 mm width root turning bump, natural pot with inside 10 mm width root turning bump, negative-phototropism pot, negative-phototropism pot with inside 5 mm width root turning bump, and negative-phototropism pot with inside 10 mm width root turning bump. As greenhouse cultivation provided a high level of control of irrigation and temperature, the seedlings did not show any significant differences in plant height, number of branches, and diameter at root collar, but showed a significant difference in root growth among the different types of pots. The root growth was best in the negative-phototropism pot. In the negative-phototropism, the roots grew in a vertical shape, while they grew abnormally in a spiral shape in the natural pots. In outdoor cultivation, the growth of seedlings showed significant differences according to container types. The seedlings grown in specially manufactured negative-phototropism pots were most excellent in all of the height, number of branches, diameter at root collar and root growth. As for the seedlings grown in the negative-phototropism pots, their roots grew vertically and thus their rooting was well established after they were transplanted outdoor. A size of less than 5 mm ridge installed in the negative-phototropism was found to be appropriate for the seedling growth. These results showed that the negative-phototropism pot would be best suitable for the growth of Betula platyphylla var. japonica seedlings and for the production of seedling for ecological revegetation.