• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.525-530
• /
• 2003

This study was carried out to develop a vacuum nozzle seeder for the automation of large seeds sowing of fruit vegetables and rootstocks. Moreover, the seeding efficiency was examined to find the optimum operating condition considering high precision seeding. The important operating factors for high seeding rate were typically nozzle diameter and absorbing vacuum pressure. The optimum nozzle diameters were found 1.5, 1.5 and 2.0 mm for Chambak, Tuktozwa and Hukjong while the optimum vacuum pressures were 8.0㎪, 10.6㎪ and 5.3㎪, respectively. Under the optimum operating condition, the results indicated that the maximum seeding rates were 97.6％, 98.8％ and 97.6％ respectively for Chambak Tuktozwa and Hukjong. The vibrating acceleration of the hopper did not make any significant effects on the seeding rate when the vacuum pressure reached 8.0㎪ and the sowing rate became higher with lighter seed. As the seed became heavier, the larger diameter of nozzle was recommended 1.5mm of the nozzle diameter was found to be applied for the experimental seeds. The vacuum pressure was also found 8.0㎪ - 13.3㎪ at that time.

• Journal of Ecology and Environment
• /
• v.37 no.4
• /
• pp.165-175
• /
• 2014

A natural population of Adonis multiflora, a spring ephemeral herb growing in temperate deciduous forests, was studied to determine the seed production characteristics. Plant size, flowering time, and seed number were monitored from February 2009 to May 2011 in main growing season (i.e., from March through May). The biomass rates of the shoot and the root in the A. multiflora population were 22-24% and 76-78%, respectively, and the biomass of the root was proportional to that of the shoot. The flowering rate was 60% in the plants with 1 to 2 g of shoot biomass, and 100% in the plants with >2 g of shoot biomass. In the plants with root biomass between 4 and 6 g, the flowering rate was 43% and, in the plants with the root biomass over 8 g, it was 100%. The shoot biomass was a better predictor of the flower production probability than the root biomass. The number of flowers and seeds was closely correlated to shoot biomass at 1% significance level. The size of the plant that produced seed excessively instead of the shoot biomass in one year typically decreased in the next year and vice versa. The flowering time and its duration were closely related to the number of faithful seeds but not to that of total seeds. The number of faithful seeds was proportionate to flowering duration and inversely proportionate to flowering time (year day, YD). In a plant, the number of faithful seeds noticeably decreased with the inflorescence (i.e., order of flower in a plant), and this difference between the two successive flowers was significant at the 1% level between the first and the third flower in 2009 and 2011 but not between the third and the fourth. However, the number of total seeds was mostly similar in the first through the fourth flower for all three years.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.1
• /
• pp.13-19
• /
• 2015

This study was conducted to improve the postharvest storage techniques of managing and storing seeds, to test qualities and viabilities of the seeds and to examine the germination rate and the protein expression of Achyranthes japonica Nakai. The seeds collected from different areas of Je-Cheon and Gwang-Ju were stored with different temperatures and durations. Two plant growth regulators and two seed priming were treated to investigate their effect on the germination rates and the days required for germination. The weight of one hundred seed collected in Gwang-Ju was heavier than those in Je-Cheon. Seed length collected in Gwang-Ju was also longer about 5.12 mm than those in Je-Cheon about 4.90 mm and seed width was longer in Gwang-Ju than those in Je-Cheon. The rates of seed germination in two different collection areas were higher about 2.9 to 13.0% in Gwang-Ju compared to those in Je-Cheon. Comparing its rates with the storing temperatures and durations, they were not clearly different in between $4^{\circ}C$ and $25^{\circ}C$ and they also were gradually decreased with getting longer storing durations. The germination rates treated by plant growth regulators were higher with $GA_3$ than those with Kinetin. The highest seed germination rate was appeared at 50 ppm of $GA_3$. Comparing its rates with different seed priming, they were relatively higher with $KNO_3$ than those with PEG6000. In protein expression patterns between before the germinating and after the germinating of seeds, more and clear bands were appeared in the seed after the germination compared to those before the germination of seeds, especially 10 ~ 20 kDa. These results showing more and clear bands were more clearly appeared in Gwang-Ju compared to Je-Cheon. Comparing the protein expression with plant growth regulators and seed primings, $GA_3$ was better expression than those with Kinetin and $KNO_3$ was better than those with PEG6000. More and clear bands were closely related to the germination rates of seeds and more detailed studies would be required.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47
• /
• pp.200-215
• /
• 2002

There are some international standards and organization controling the quality characteristics of varieties and seeds such as UPOV, OECD, ISTA, AOSA. The National List system to check variety performance such as quality characteristics of plant varieties and seeds was established by each countries. The UPOV (International Union for the Protection of New varieties of Plant) regulates the requirement of plant variety protection that is distinctness (D), uniformity (U), stability (S) (here in after called DUS), Novelty and Denomination, and some quality characteristics are used to examine the requirement of plant variety protection by each crops. OECD (Organization for Economic Cooperation Development) seed scheme regulates the seed certification for seed trade between countries. ISTA (International Seed Testing Association) and AOSA(Association for Official Seed Analyst) regulates the seed analysis standard and methods. Most of the countries in Europe has the National List system, which check the value for cultivation and use(VCU), that is to say, variety performance such as yield, quality and stress to environment. All the seeds should be enlisted in the National List before sell the seed in their country. All the quality characteristics checked variety performance are for instance, amylose and amylopectin content in rice, molting quality, $\beta$-glucan, protein in barley, protein and sugar content in soybean, sugar and amylopectin content in corn etc. Conditions for the protection of new variety of plant are DUS. Quality characteristics may be the important characteristics and used to check DUS in crop by crop. It is very important to develop a new characteristics and establish standard method fur examine the VCU and DUS test for each crop.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.292-296
• /
• 2008

Clay-coated rice seeds (clay-coated seeds A and B) were directly sown on dry paddy and their growth and yield were compared with the normal drill-sown seeds on dry flat paddy. In clay-coated seeds, germination was 1 day earlier and the emergence rate was higher up to 5% than that of normal drill-sown seeds. But the apparent number of seedling stand per $m^2$ was lower than that of normal drill-sown seeds, which is due to the smaller amount of seeding in clay-coated seeds. At the early growth stage, the plant height of clay-coated seeds A was taller than that of drill-sown seeds, while the plant height of clay-coated seeds B was 0.7 cm shorter than that of drill-sown seeds. At the late growth stage, however, the difference was insignificant in both cases. The maximum tillering stage was 10 days earlier in drill-sown seeds. Lodging index was the lowest in clay-coated seeds B and there was no difference between clay-coated seeds A and drill-sown seeds. The ratio of stem base weight, culm diameter and culm wall thickness were higher in clay-coated seeds, while the lower internodes (4th, 5th and 6th) length was shorter in claycoated seeds than in drill-sown seeds. In clay-coated seeds, the number of panicle per $m^2$ was smaller, while the number of spikelet per panicle was a little larger than in drill-sown seeds. The rate of ripened grain and brown rice 1,000 grain weight were lower in the clay-coated seeds, thus the yield was $98{\sim}99%$ level of drill-sown seeds. Considering that the amount of seeding in clay-coated seeds was two-thirds of that in drill-sown seeds, it is expected that clay coating method could become an additional technique for direct seeding cultivation.

• Animal cells and systems
• /
• v.3 no.1
• /
• pp.29-39
• /
• 1999

Current data on reproductive characters of endemic and native species are essential to provide a strategy for the conservation of these species. Red pine (Pinus densiflora Sieb. & Zucc.) is one of the dominant, native tree species in Korea, but its reproductive ecology is not well-known. In 1997, the pattern of variation in cone and seed yields contributing to the conservation of declining populations of red pines was examined. Plant height and dbh were measured, and several new cones were collected from each tagged tree after counting the number of cones on each tree. For a subset of cones sampled, the number of fertile scales, the number of seeds at three development stages (early/late aborted, and filled seed), seed wing size, wing color, and individual filled seed mass were measured. The three sites which differed significantly in mean plant size also differed in mean cone and seed production per plant. However further analyses showed that most variation in characters examined occurred among plants within sites, but not among sites. An average of 90% of the potential seeds on the cones aborted at an early developmental stage, demonstrating that early abortion is a major factor affecting the number of filled seeds per cone. Individual seed mass was the only character which exhibited significant variations among sites as well as among trees within sites. Individual seed mass was overall negatively correlated with both the percentage of late abortion and the number of old cones per plant, suggesting that both the past and current years' reproductive activities have caused variations in seed mass. The potential dispersal distance of red pine seeds is quite large. However, wing loading was correlated with seed mass and number in a complex pattern across the sites. Distribution of seeds with varied colored wings differed among sites and among trees within sites. These results suggest that red pines at different sites might possess different strategies to cope with selection pressures acting during the final phase of reproduction, from seed dispersal to establishment. Then the ‘fitted’ red pine trees at each site should be identified and managed to conserve or restore populations.

• Korean Journal of Plant Resources
• /
• v.29 no.6
• /
• pp.670-678
• /
• 2016

We compared the germination rate of dehisced ginseng (Panax ginseng) seeds that were dried under two different conditions, slowly at $15^{\circ}C$ [relative humidity (RH) 10-12%] and rapidly under a laminar airflow cabinet at $25^{\circ}C$ (RH 22-25%). The measurements showed that drying rate and seed moisture content (SMC) play important roles in storage ability and vigor. The seeds that were dried rapidly at $25^{\circ}C$ showed high GR compared with the seeds that were dried at $15^{\circ}C$ after 6 and 12 months of storage at $-80^{\circ}C$ irrespective of MC. Seeds dried slowly at $15^{\circ}C$ with MC higher than 7.0% showed high GR maintenance after storage at $-18^{\circ}C$ and at $4^{\circ}C$ in comparison with rapidly dried seeds. However, the GR of the slowly desiccated seeds decreased as mean SMC was reduced to less than 5.0%, whereas the rapidly dried seeds were distinguished by significantly high GR irrespective of the storage conditions. The ginseng seeds desiccated under different conditions showed differences in storage performance. Seeds with 7-9% MC that were dried slowly at $15^{\circ}C$ for 5-7 days showed high GR after $4^{\circ}C$ and $-18^{\circ}C$ storage; however, longer periods of desiccation decreased the germination level remarkably compared with that of rapidly dried seeds.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.86-86
• /
• 2018

This study was conducted to investigate the effects of modified drum priming and 24-Epibrassinolide (24-EBL) treatment to improve the seed quality for export. 40, 50 and 60% seed moisture content (SMC) of hydrated seeds were incubated for 16 and 24 h in a container with a relative humidity of 99% at 26 rpm for a modified drum priming treatment. The treated seeds were sown at $20^{\circ}C$ and $30^{\circ}C$ (12/12h, light/dark) with four replications of 25 seeds on pleated paper. The seeds were hydrated with water or 24-EBL solutions of $10^{-7}$, $10^{-8}$ and $10^{-9}M$, respectively. The germination of the modified drum primed seeds (24 h incubation after 60% SMC hydration) improved to 1.6 days mean germination time (MGT) and $46%{\cdot}day^{-1}$ germination rate (GR), while the untreated seeds showed 2.1 days MGT and $28%{\cdot}day^{-1}$ GR. The modified drum priming (60% SMC and 24 h incubation with $10^{-9}M$ 24-EBL) showed improved results in MGT (1.8 days) and GR (55%) at $20^{\circ}C$, whereas untreated seeds showed 2.3 days MGT and 44% GR. Under $30^{\circ}C$, germination of modified drum primed seeds was significantly improved in GP (80%), GR ($31%{\cdot}day^{-1}$), HS (55%) and MGT (3.3 days), however, untreated seeds showed decreased GP (27%), GR ($22%{\cdot}day^{-1}$), HS (55%) and MGT (4.8 days). This study showed that the germination of lettuce seeds is enhanced by 24 h drum incubation with 24-EBL and this method can be used effectively to achieve the benefits of early germination and uniform seedling development. In addition, these treatments circumvent thermo-dormancy of lettuce seed and have a possibility of high-quality and environment-friendly seed processing.

• Asian Journal of Turfgrass Science
• /
• v.18 no.1
• /
• pp.29-36
• /
• 2004

The efficient refinement of seed is required to reduce the cost and labor input in artificial propagation of wild plant. This study was carried out to develop methods for collecting and refining tiny seeds from wild plants. For obtaining Phragmites communis seeds, the inflorescence was cut into small fragments using a Straw Cutter and subsequently detached pappus hairs from seed coat by Hammer Mill. The primary refined seeds were passed 1.0 mm sieve. The screened seeds were subjected to Seed Blower with wind speed of 0.25 mㆍsec-1 to collected intact and well-ripen seeds. The seeds of Imperata cylindrica were refined as follows. Inflorescences were cut using a Straw Cutter first. The pappus was removed from cut fragments using a Hammer Mill and subsequently subjected to Seed Scarifier at 500rpm for 60 sec. for further separation. The separated seeds were passed 1.0 mm screen and collected after blowing with Seed Blower of wind speed of 0.15 mㆍsec-1. When the amount of seed was too little to refine with Seed Scarifier and Blower, the procedure was slightly modified from the procedure described above. The crude seed mixture obtained from Hammer Mill step was hand-refined roughly and then immersed into cone. (95%) sulfuric acid for 2 min. and collected floating portion after dilution of sulfuric acid solution 100 times with tap water. The collected seeds were dried and passed 0.149 mm sieve. During seed refining process using mechanical or sulfuric acid treatments, a small portion of damaged seed were evolved, however, the amount was not noticeable as compared to the total amount of collected seeds. Because the germination percentages between hand-refined seeds and seeds refined by above methods were not statistically different, the developed procedures for refining tiny seed of wild plants are helpful to reduce the cost and labor input in artificial propagation of two species.

• Korean Journal of Plant Resources
• /
• v.16 no.2
• /
• pp.147-154
• /
• 2003

Agronomic characters of the 361 Korean adzuki beans(Vigna angularis (Willd.) Ohwi & Ohashi) collected in Korea were examined. Korean adzuki beans had predominantly up right growth habit types, followed by the intermediate types (15.3%) and the climbing types (6.9%). Round leaf type was the majority among the collections and followed by elliptical and xiphoid leaf type. Adzuki beans with yellow, light yellow and dark yellow flowers were 89.5％, 9.4％ and 1.1％, respectively. The 60.6% of the collections had red seeds and 26.9% had gray seeds. And collections with green seeds, white seeds mixed with gray spot, brown spots on red seeds, black spots on red seeds and dark gray spots on black seeds were also observed. Korean adzuki beans whose number of days from planting to flowering were 69∼75 days were the majority among 361 Korean adzuki beans. The number of days from flowering to majority were 41∼50 days and the number of days from planting to maturity were 111-120days. Adzuki beans having the stem length of 41-60 cm, the pod number per plant of 16-20 and the 100 seed weight of 8∼10 g were 50.2％, 40.2% and 30.5％ of collections, respectively.