• 한국전자파학회논문지
• /
• 제12권7호
• /
• pp.1048-1056
• /
• 2001

고속 다층 인쇄 회로 기판의 전원 평면과 접지 평면을 통해 전파되는 SSN 잡음의 영향을 감소시키기 위하여 일반적으로 디커플링 캐패시터를 사용한다. 본 논문에서는 디커플링 캐패시터에 대한 간단한 고주파 측정 방법 을 제시하고 고주파 기생 성분들을 고려한 광대역 (50 MHz ~3 GHz) 등가 회로 모델을 제안하였다. 제안된 모델은 SSN의 영향을 분석하기 위한 전원 평면과 접지 평면의 SPICE 모델과 쉽게 결합할 수 있다. 제안된 모델이 연결된 회로 해석 결과는 측정 결과와 잘 일치하며, 제안된 모델을 이용한 회로 해석을 통해 디커플링 캐패시터 값에 따른 잡음 감소 효과를 빠르고 정확하게 분석할 수 있음을 확인하였다.

• 한국세라믹학회지
• /
• 제37권4호
• /
• pp.320-326
• /
• 2000

Development of texture in SiC materials by hot-pressing and subsequent annealing was studied. Crystallographic texture type was characterized by measuring X-ray pole figures on the perpendicular plane to the hot-pressing direction. Observed all pole figures were nearly axially symmetric (fiber texture). In case of ${\beta}$-SiC materials, the pole density of basal plane (0004) increased as annealing time increased, in contrast, other planes (hkil) of ${\beta}$-SiC materials and all planes of ${\alpha}$-SiC materials nearly remained unchanged. In the case of ${\beta}$-SiC materials, therefore, a weak texture of (0001) plane at the normal direction took place in the 8h annealed samples, resulting from grian growth. The fracture toughness values of ${\alpha}$-SiC materials measured in both planes parallel and perpendicular to the hot-pressing direction were very similar. However, the fracture toughness of ${\beta}$-SiC materials measured parallel to the hot-pressing direction were higher than that measured perpendicular to the hot-pressing derection, relatively, because of the texture and the microstructure anisotropy.

• 한국정보통신학회논문지
• /
• 제23권4호
• /
• pp.388-393
• /
• 2019

외란(Outlier)이 있는 데이터를 피팅(Fitting)하는 방법으로 RANSAC(RANdom SAmple Consensus)알고리즘이 선, 원, 타원 등 의 피팅에 많이 사용되고 있다. 본 논문은 다수의 평면에 대한 3차원 포인트 데이터가 주어질 때 각 평면에 대해 RANSAC기반 평면 피팅을 최근 딥러닝 등에 많이 사용되는 GPU의 하나인 CUDA를 이용하여 효율적으로 수행하는 알고리즘을 제안한다. 모의 데이터와 실제 데이터를 이용하여 제안된 알고리즘의 성능을 CPU와 비교하여 보인다. 외란이 많고 인라이어(inlier) 비율이 낮을수록 CPU대비 속도가 향상되고 평면의 개수가 많을수록 평면당 데이터개수가 많을수록 병렬처리에 의한 속도가 가속됨을 보인다. 제안된 방법은 다중 평면 피팅외의 다른 피팅에도 쉽게 적용할 수 있다.

• 대한치과교정학회지
• /
• 제53권4호
• /
• pp.219-231
• /
• 2023

Objective: This study aimed to clarify differences in the positions of cone-beam computed tomography (CBCT) landmarks according to different midsagittal planes (MSPs) in patients with skeletal Class III facial asymmetry. Methods: Pre-treatment CBCT data from 60 patients with skeletal Class III were used. The patients were classified into symmetric (menton deviations of < 2 mm) or asymmetric (menton deviations of > 4 mm) groups. Six MSPs were established based on previous studies, and three-dimensional analyses were performed for the planes in both the groups. The measurement outcomes were compared statistically. Results: A statistically significant interaction (p < 0.01) was observed between MSPs and facial asymmetry. No significant differences were observed among MSPs in the symmetric group. However, significant differences in linear measurements were identified among MSPs in the asymmetric group. Specifically, the upper facial MSP revealed both maxillary and mandibular transverse asymmetries. On the other hand, anterior nasal spine (ANS)-associated MSP could not identify maxillary asymmetry. Furthermore, the menton deviation was approximately 3 mm lower when estimated using the ANS-associated MSP than that using upper facial MSP. Conclusions: The choice of MSP can significantly affect treatment outcomes while diagnosing patients with asymmetry. Therefore, care should be taken when selecting MSP in clinical practice.

• 천문학회보
• /
• 제25권2호
• /
• pp.79-79
• /
• 2000

• 한국유전체학회:학술대회논문집
• /
• 한국유전체학회 2002년도 The 11th Korea Genome Conference
• /
• pp.32-32
• /
• 2002

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.271-273
• /
• 2007

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제5권
• /
• pp.534-541
• /
• 1997

• Kyungpook Mathematical Journal
• /
• 제4권1호
• /
• pp.23-47
• /
• 1961

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.114-117
• /
• 2007

In the present study, the effects of initial texture on the twinning formation of AZ31 Mg rolled sheet was investigated. Uniaxial compression tests were performed on samples cut along the normal direction and rolling direction of rolled AZ31 Mg alloy sheet at various temperatures (RT, 200, 250, 300, 350, $400^{\circ}C$) with the 0.01/s strain rate. Pole figure of rolling planes showed that basal planes of most gain were located parallel to the rolling direction. After compression test, microstructures and stress-strain curves results indicated that active deformation twining occurred only at the specimen cut along the rolling direction. The slip-twin transition with the increase of temperature was also investigated.