• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.150-157
• /
• 2002

This paper presents an effective cutting force model that enable us to predict the instantaneous cutting force in face milling from a knowledge of the work material properties and cutting conditions. The development of the model is based on the orthogonal machining theory with the effective rake angle which is defined in the plane containing the cutting velocity and chip flow vectors. Face milling testes are performed at different feeds and, a fairly good agreement is shown between the predicted cutting forces and test results.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권3호
• /
• pp.13-18
• /
• 2005

This paper presents an effective cutting force model that enables us to predict the instantaneous cutting force in face milling from knowledge of the work material properties and the cutting conditions. The development of the model is based on the orthogonal machining theory with the effective rake angle, which is defined in the plane containing the cutting velocity vector and the chip flow vector. Face milling tests are performed at different feeds and, a fairly good agreement is shown between the predicted cutting forces and the test results.

• Journal of applied mathematics & informatics
• /
• 제10권1_2호
• /
• pp.145-155
• /
• 2002

In this paper we study the rooted loopless maps on the sphere and the projective plane with the valency of root-face and the number of edges as parameters. Explicit expression of enumerating function is obtained for such maps on the sphere and the projective plane. A parametric expression of the generating function is obtained for such maps on the projective plane, from which asymptotic evaluations are derived.

• 터널과지하공간
• /
• 제29권5호
• /
• pp.332-345
• /
• 2019

평사투영도에서 불연속면을 대표하는 유일한 점으로 정의되는 최대경사벡터를 해당 면의 경사와 경사방향에 의거하여 형성하였다. 평사투영해석에서 평면의 극점이 대원과 역방향에 제도되는 것에 비해 최대경사벡터는 대원의 최대 경사지점에 위치하여 불연속면의 미끄러짐 방향을 직접 투영도 상에서 지시한다. 투영도 상에서 불연속면의 거동방향을 직접적으로 지시하는 최대경사벡터를 활용하여 평면 및 전도파괴 양상을 직관적으로 확인하였다. 특히 평면 파괴의 경우 블록의 옆면을 형성하는 고 경사 절리의 존재를 확인하여 실제 미끄러짐 블록의 형성가능성을 산정하였다. 또한 사면 방향과 반대방향을 갖는 고경사절리들의 존재를 확인하여 3각형 단면을 갖는 미끄러짐 블록의 형성여부를 판별하고 안전율을 도출하였으며, 4각형 단면을 갖는 가장 취약한 블록의 안전율과 비교분석하였다. 쐐기파괴 경우에는 절리면 교차에 의해 형성되는 쐐기의 기저선 방향이 최대경사벡터 속성을 지니고 있어 쐐기파괴 영역을 평면 및 전도파괴 영역이 제도된 투영도 상에 함께 도시하여 분석을 수행하였다. 특히 쐐기 상부 면을 형성하는 절리를 추출할 수 있어 전체 쐐기형상을 추정하고 역학적 거동분석을 수행하는데 요구되는 쐐기의 기하학적 특성자료를 도출하는 토대를 확립하였다.

• 대한치과교정학회지
• /
• 제6권1호
• /
• pp.39-46
• /
• 1976

This study was undertaken to establish the cephalometric standards, using lateral cephalometric roentgenograms of 48 male and 53 female Korean adults with normal occlusion and acceptable profile. By Cohen's method, measurement of depth was taken parallel to the FH plane and expressed as a percentage of the cranial base depth (BA-N). And vertical height was measured along the line perpendicular to the FH plane and expressed as a percentage of the anterior face height (N-M). The following conclusions were obtained: 1) Means and standard deviations of craniofacial proportions of Korean adults were tabulated. 2) Cranial babe depth of male was greater than that of female. 3) The proportionate depth of the middle face was greater in female than in male. 4) The proportionate total anterior face height was greater in male than in female. And it was greater in Korean than in the white.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.193-200
• /
• 2003

In this study a general Galerkin FE formulation of the incompressible Reynolds equation is derived for lubrication analyses of noncontacting mechanical face seals. Then, the formulation is applied to analyze the flexibly mounted stator-type reactor coolant pump seals of local nuclear power plants, which have deep straight grooves or plane coning on their primary seal ring faces. Their various lubrication performances have been predicted. Results show that the analyzed deep straight groove seal should have a net coning of less than $0.6\;{\mu}m$ to satisfy the leakage limit. And for the same amount of equilibrium opening force the plane coning seal requires to have a 3 times higher dimensionless coning than the deep straight groove seal.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.119-126
• /
• 2002

Fractures, especially faults have most significant influence on the difficulties encountered in various engineering and mining works, because they can give rise to inevitable reductions in shear strength as well as large increase in permeability. Thus, before underground access is possible, it is desirable to estimate the distribution and geometry of fractures in advance, if reliable structural data from e.g. Televiewer tool are available. To this end, fracture face mapping is just the evaluation method used to form a fracture image determined by intersecting of each fracture plane with a selected plane section of a rock mass, assuming that all fractures be planar with fixed-aperture. Although many fractures are geometrically complex and others are altered chemically, according to the abundant experiments in recent years, it would seem that the technique could be applied to benefit the design of numerous engineering works such as slope stability, tunnel excavations, dam foundation and diverse environmental works. This paper presents at first an evaluation algorithm for fracture face mapping and then concludes with various representative examples of applications.

• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.66-75
• /
• 1999

Weld bead quality in tailored blank(TB) is critically affected by edge preparation of sheets. The edge quality of prepared sheets for TB can be classified into straightness and the cross section quality of sheared plane such as a ratio of shear face, shear plane angle, etc. In order to have a good edg quality for butt-welding sheets, precision shearing will be recommended. In this paper, the feasibility of a conventional mechanical shearing as the edge preparation for tailored blanks is studyied. It reveals that fine shearing may not be the unique solution as it is generally accepted. To obtain the good shearing condition with a conventional mechanical shearing, experiments were carried out using Tahuchi method. The major parameters affecting a sheared contour are the clearance between upper blade and lower blade, and shear angle. The optimal shearing condition yields a very good straightness along the entire length of the cut, which gives a butt joint gap less than 10% of the base material thickness. The good cross section of sheared plane is also achieved in the optimal shearing condition such as a ratio of the shear face above 65%, a cross section's shear plane angle above 85%, little burr, which is providing finally good weld beads.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.821-826
• /
• 1999

This paper proposes a face recognition method using feature spaces and image vectors in the image plane. We obtain the 2-D feature space using the self-organizing map which has two inputs from the axis of the given image. The image vector consists of its weights and the average gray levels in the feature space. Also, we can reconstruct an normalized face by using the image vector having no connection with the size of the given face image. In the proposed method, each face is recognized with the best match of the feature spaces and the maximum match of the normally retrieval face images, respectively. For enhancing recognition rates, our method combines the two recognition methods by the feature spaces and the retrieval images. Simulations are conducted on the ORL(Olivetti Research laboratory) images of 40 persons, in which each person has 10 facial images, and the result shows 100% recognition and 14.5% rejection rates for the 20$\times$20 feature sizes and the 24$\times$28 retrieval image size.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권2호
• /
• pp.143-148
• /
• 2009

Introduction: To correct abnormal occlusal plane by orthognathic surgery, we need to have clear criteria for therapeutic occlusal plane. Authors introduced the concept of individualized ideal occlusal plane(Y-plane), which is determined by the size and form of the mandible, and the ideal incisor tip considering upper and lower lip. Authors studied the following to verify if the actual occlusal plane of the patients with optimal jaw relationship corresponds with the individualized ideal occlusal plane. Patients: We reviewed 44 patients who have normal occlusion visitied in the Dept. of orthodontics, Pundang CHA hospital. Methods: We evaluated if there are agreement between individualized ideal occlusal plane(Y plane) and occlusal plane of actual patients. And we confirmed if tested group has a normal face by measuring FABA, FMA, AB-LOP. Results: There were no significant differences of FABA, FMA, AB-LOP, Mo-Y plane between male and female. FABA, FMA and AB-LOP were included in the normal value. Average distance of Mo-Y plane was $0.75{\pm}0.78mm$. Conclusion: Individualized ideal occlusal plane may be applied to orthognathic surgery.