• Journal of Environmental Impact Assessment
• /
• v.32 no.1
• /
• pp.15-28
• /
• 2023

In the Republic of Korea, the target project scope of the small-scale EIA is stipulated as the plan area above around 5,000~60,000m² depending on a type of project and classification of land use. Whereas, the lower limit of the corresponding local government EIA project is generally located above the small-scale EIA's limits, and overlapping ranges exist. This situation has been enlarged since road construction and district unit planning were included as the target projects for small-scale EIA in the "Enforcement Decree of the Environmental Impact Assessment Act", which was partially revised in November 2016, and the current consultation system needed discussion in that small-scale EIA is allowed to be done without gathering review opinions at the local level. In fact, projects subjected to local government EIA but consulted as small-scale EIAs may seem insignificant because of a small number of total cases; however, it is worth paying attention to the fact that a local government may not add a target project due to the small-scale EIA. This study suggested the three policy measures for improving small-scale EIA to enhance the effectiveness of local government EIA: supplementing the institutional arrangements to incorporate the review opinion from the local region in small-scale EIA, giving priority to local EIA for conducing the projects in overlapping ranges with partial amendments on EIA law regarding exceptions to local government EIA, including small target projects (not to be small-scale EIA targets) to the ordinance that are deemed necessary to be conducted as local government EIA. Even though a positive function of small-scale EIA has been confirmed, efforts should be made to improve the situation in which many projects within local governments are consulted without review from the region.

• Journal of Service Research and Studies
• /
• v.12 no.2
• /
• pp.65-79
• /
• 2022

Non-face-to-face classes continue due to Covid-19. There have been e-learning classes since the past, but the difference is that the current non-face-to-face classes are blended classes that combine real-time and recording classes or combine face-to-face and non-face classes. It is also characterized by being able to self-filmed or choose various lecture platforms in a place other than a dedicated studio. The advantages of non-face-to-face classes can be learned beyond time and space, and repetitive viewing and learning speed can be adjusted. Greening classes have no time and place constraints, and real-time classes have the advantage of high communication effects with learners. Evaluating whether non-face-to-face classes provide sufficient quality compared to face-to-face classes or e-learning will be necessary if branded classes are considered for post Covid. In this paper, for the evaluation of the service quality of non-face-to-face classes, the essential attributes desired by the instructors were derived from the viewpoint of Kano quality attributes and a quality improvement plan was proposed. After expressing the degree of functions that non-face-to-face classes should have on the X-axis and the satisfaction of learners on the Y-axis, 23 quality attributes were classified into 6 quality dimensions. In addition, satisfaction coefficient, dissatisfaction coefficient, and customer satisfaction improvement index were derived. As a result, 50% of learners were satisfied with non-face-to-face classes, but the preference was slightly higher than satisfaction, suggesting the sustainability of non-face-to-face classes. In terms of the customer satisfaction improvement index, the ranking of attributes with the largest increase in satisfaction when improving class quality was as follows. Professors' quick answers to learners' questions, content that can fully explain the subject, what the professor explains easily, develop high-quality content that can be learned on mobile phones, fairness of attendance checks, and real-time classes should start on time.

• Journal of Intelligence and Information Systems
• /
• v.29 no.1
• /
• pp.121-142
• /
• 2023

As the number and weight of imported food are steadily increasing, safety management of imported food to prevent food safety accidents is becoming more important. The Ministry of Food and Drug Safety conducts on-site inspections of foreign food facilities before customs clearance as well as import inspection at the customs clearance stage. However, a data-based safety management plan for imported food is needed due to time, cost, and limited resources. In this study, we tried to increase the efficiency of the on-site inspection by preparing a machine learning prediction model that pre-selects the companies that are expected to fail before the on-site inspection. Basic information of 303,272 foreign food facilities and processing businesses collected in the Integrated Food Safety Information Network and 1,689 cases of on-site inspection information data collected from 2019 to April 2022 were collected. After preprocessing the data of foreign food facilities, only the data subject to on-site inspection were extracted using the foreign food facility_code. As a result, it consisted of a total of 1,689 data and 103 variables. For 103 variables, variables that were '0' were removed based on the Theil-U index, and after reducing by applying Multiple Correspondence Analysis, 49 characteristic variables were finally derived. We build eight different models and perform hyperparameter tuning through 5-fold cross validation. Then, the performance of the generated models are evaluated. The research purpose of selecting companies subject to on-site inspection is to maximize the recall, which is the probability of judging nonconforming companies as nonconforming. As a result of applying various algorithms of machine learning, the Random Forest model with the highest Recall_macro, AUROC, Average PR, F1-score, and Balanced Accuracy was evaluated as the best model. Finally, we apply Kernal SHAP (SHapley Additive exPlanations) to present the selection reason for nonconforming facilities of individual instances, and discuss applicability to the on-site inspection facility selection system. Based on the results of this study, it is expected that it will contribute to the efficient operation of limited resources such as manpower and budget by establishing an imported food management system through a data-based scientific risk management model.

• Journal of Technology Innovation
• /
• v.31 no.1
• /
• pp.29-63
• /
• 2023

The purpose of this study is to analyze the process of changes in regional science and technology policies in Korea and to seek future development directions. In Korea, regional science and technology policies have been implemented since the introduction of the local autonomy system. Since then, it has been implemented in earnest with the establishment of a central government-level plan. The regional science and technology policies have been developed to this day by interacting with national science and technology policies and regional development policies. Nevertheless, due to the path dependence and lock-in effect in the accumulated process, the regional science and technology policies are still subordinate to central government policies. Thus, the establishment of an independent ecosystem for local science and technology is still insufficient. Furthermore, the gap between regions is deepening, such as the growing of aging population, population decline due to low birth rates, job losses due to the recession of local key industry, and the concentration of the youth population in the metropolitan area. The transformation path such as digital transformation and carbon neutrality paradigm is expected to further widen regional disparities. In order to address a comprehensive problem, the implementing system of regional science and technology policies need to be newly established. A framework for reinvention of regional science and technology policy needed in the era of grand societal challenges have to be developed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.2
• /
• pp.1-19
• /
• 2023

In Korea, excessive vegetation in rivers made up of sand and gravel is emerging as a nationwide problem, which is attributed to increased spring precipitation and decreased annual precipitation. Therefore, this study was conducted for the purpose of identifying the effect of changes in precipitation patterns on river vegetation in Namcheon, Gyeongju, and analyzing the area of vegetation and ecological characteristics. As a result of the study, the amount of monthly precipitation in the summer of Namcheon decreased after 2007, and the area of vegetation increased continuously compared to the area of the sandbank. The proportion of naturalized plants increased steadily when precipitation continued to a level that did not cause flooding, but the area occupied by naturalized plants was small. Also, when the water level is maintained, the species diversity is low due to the dominance of a single species, and the dominant species was mainly native plants. Dominance of native plants inhibited the growth of naturalized plants, but the vegetation area increased even more. Therefore, it is necessary to manage the spread of vegetation itself rather than the division of native plants and naturalized plants in order to eliminate the active growth and prosperity of river vegetation. High water levels and continuous flooding caused by torrential rains in summer disturbed the plant communities, and vegetation formed afterwards was mainly native plants. Such flooding in river ecosystems is a positive factor for the emergence of native plants and over-formed vegetation communities, so it should be considered when establishing a vegetation management plan.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.2
• /
• pp.68-81
• /
• 2023

This study aims to establish a scenario based on the spacing and arrangement of the roadside trees to reduce heat waves and fine dust in cities that occurred during the urbanization process and to quantitatively analyze the degree of reduction. The ENVI-met 5.0.2v model, a micro-climate simulation program, was used to analyze the degree of improvement in the thermal environment and fine dust according to the roadside tree scenario. As a result of temperature analysis according to street tree spacing, the narrower the distance between roadside trees, the lower the temperature during the day as the number of planted trees increased, and a similar pattern was shown regardless of the distance between roadside trees in the morning and evening. In the case of fine dust emitted from the road, the concentration of fine dust increased slightly due to the increase in roadside trees, but the concentration of sidewalks where people walk increased slightly or there was no difference because of blocking fine dust on trees. The temperature according to the arrangement of street trees tended to decrease as the number of planted trees increased as the arrangement increased. However, not only the amount of trees but also the crown projected area was judged to have a significant impact on the temperature reduction because the temperature reduction was greater in the scenario of planting the same amount of trees and widening the interval of arrangement. In terms of the arrangement, the fine dust concentration showed a difference from the results according to the interval, suggesting that the fine dust concentration may change depending on the relationship between the main wind direction and the tree planting direction. By quantitatively analyzing the degree of thermal environment and fine dust improvement caused by roadside trees, this study is expected to promote policies and projects to improve the roadside environment efficiently, such as a basic plan for roadside trees and a project for wind corridor forests.

• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.352-362
• /
• 2023

Harvest time is one of the most important determining factors of seed quality, especially for species that produce seeds over irregular and long-term periods, such as Larix kaempferi. A cone collection plan must be established to increase seed production efficiency and stable mass production. We investigated seed qualities such as seed efficiency, germination rate, and T₅₀ (germination speed), with 7 or 8 cone collection times at a clonal seed orchard of L. kaempferi in Chungju between 2021 and 2022. A multivariate analysis was then performed for the collected data. In early August, decreases in the moisture contents and browning of cones were observed. These were followed by a decrease in germination rate, with a peak at the end of September, but no clear trend was observed. The later the cones were harvested, the better the seed vigor (T₅₀). However, the seed yield and efficiency decreased owing to increases in seed scattering and the number of insect-damaged seeds. As a result, the optimal time of seed harvest for the seed orchard was in early August. To produce uniform seedlings, insect damage must be reduced through timely control and harvest cones in early September. This shows that the degree of browning and moisture content of cones can be used as indicators of the timing of cone collection in L. kaempferi seed orchards.

• Journal of Intelligence and Information Systems
• /
• v.29 no.3
• /
• pp.361-381
• /
• 2023

Research on corporate bankruptcy prediction has been focused on financial information. Since the company's financial information is updated quarterly, there is a problem that timeliness is insufficient in predicting the possibility of a company's business closure in real time. Evaluated companies that want to improve this need a method of judging the soundness of a company that uses information other than financial information to judge the soundness of a target company. To this end, as information technology has made it easier to collect non-financial information about companies, research has been conducted to apply additional variables and various methodologies other than financial information to predict corporate bankruptcy. It has become an important research task to determine whether it has an effect. In this study, we examined the impact of electronic payment-related information, which constitutes non-financial information, when predicting the closure of business operators using electronic payment service and examined the difference in closure prediction accuracy according to the combination of financial and non-financial information. Specifically, three research models consisting of a financial information model, a non-financial information model, and a combined model were designed, and the closure prediction accuracy was confirmed with six algorithms including the Multi Layer Perceptron (MLP) algorithm. The model combining financial and non-financial information showed the highest prediction accuracy, followed by the non-financial information model and the financial information model in order. As for the prediction accuracy of business closure by algorithm, XGBoost showed the highest prediction accuracy among the six algorithms. As a result of examining the relative importance of a total of 87 variables used to predict business closure, it was confirmed that more than 70% of the top 20 variables that had a significant impact on the prediction of business closure were non-financial information. Through this, it was confirmed that electronic payment-related information of non-financial information is an important variable in predicting business closure, and the possibility of using non-financial information as an alternative to financial information was also examined. Based on this study, the importance of collecting and utilizing non-financial information as information that can predict business closure is recognized, and a plan to utilize it for corporate decision-making is also proposed.

• Journal of the International Relations & Interdisciplinary Education
• /
• v.3 no.1
• /
• pp.1-28
• /
• 2023

This study was conducted to examine the quantitative trend of domestic studies in invention gifted education, identify the intrinsic meaning and connection attributes in these research analysis, and provide basic data to explore future development plans. To this end, 97 domestic academic papers were finally selected as "Invention Gifted Education" by the Korea Research and Information Service (RISS), technical statistical analysis was conducted with SPSS on publication year, author composition, researcher's affiliation and location area, and published journal. The trend, which had been on the rise since 2007, confirmed by academic papers on gifted education in invention, peaked at the time of the 3rd comprehensive plan for gifted education and has since declined again. As a result of technical statistical analysis of the author's characteristics, half of the papers were jointly published, followed by a number of independent authors. The papers published alone were identified as belonging to universities, research institutes, elementary schools, and middle schools, and the cooperative papers were many studies cooperated with young researchers and professional researchers, and only one collaborative study was conducted between young researchers. When looking at the regions and journals in which the Invention Gifted Education thesis was published, it was concentrated in some regions or journals, and the deviation was very large. As a result of language network analysis using academic paper keywords, creativity and programs were identified as meaningful keywords that showed top appearance, and the keyword pair with high co-appearance was invention gifted-creativity. The keyword of connection-centeredness at the top served as an intermediary for creativity, problem-solving, development, and company to expand to other research topics, and served as a research topic that could be expanded to various topics. In the case of mediation-centeredness, creativity, programs, and effects showed high mediation-centeredness, indicating that it is an important keyword that plays a role in mediating or mediating other keywords. Through these research results, national policy measures need to be prepared for the development of gifted education, and the need to create an invention ecological culture that can enhance teachers' expertise while increasing social responsibility for gifted education.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.2
• /
• pp.179-191
• /
• 2023

The purpose of this study was to investigate the prevalence and patterns of congenitally missing teeth in permanent teeth excluding third molars, in patients aged 8 to 16 years who visited Pusan National University Dental Hospital from January 2010 to February 2021. This retrospective study evaluated tooth agenesis and the pattern of missing teeth represented by the tooth agenesis code by reviewing panoramic radiographs and electronic medical records of 11,759 patients, including 5,548 females and 6,211 males. The prevalence of congenitally missing teeth was 10.74% (females 11.95%, males 9.66%, p < 0.0001). Patients with tooth agenesis had an average of 2.22 missing teeth, and congenitally missing teeth occurred more frequently in the mandible (8.39%) than in the maxilla (4.52%, p < 0.0001). The mandibular second premolar (58.19%) was the most frequently missing tooth. The second premolar was the most frequently missing tooth in all quadrants (30.10%, 31.67%, 43.14%, and 35.59%) when a single tooth was absent, while the first and second premolars were the most commonly absent teeth (11.69%, 11.47%, 5.94%, and 5.24%) when two or more teeth were missing. In the relationship between maxillary-mandibular antagonistic quadrants and full mouth, the 1st to 4th place of the missing patterns were all involved with the 1st and 2nd premolars. This study can be clinically helpful in establishing a treatment plan for patients with missing teeth. In addition, it can be used as basic data for molecular biological research to find out the relationship between tooth agenesis and specific genes.