• 대한기계학회논문집B
• /
• 제29권8호
• /
• pp.927-933
• /
• 2005

Boiling heat transfer characteristics of liquid nitrogen in a stainless steel plain tube and wire coil inserted tubes were investigated. The test tubes, which had an inner diameter of 10.6 m and a length of 1.65 m, were horizontally located. Five wire coils having different pitch and thickness were inserted into the plain tube. The pitches of the wire coils were 18.4, 27.6, and 36.8 m, and the thickness was 1.5, 2.0, and 2.5 mm respectively. Tests were conducted at a saturation temperature of $-191^{\circ}$, mass fluxes from 58 to 105 kg/$m^2s$, and heat fluxes from 22.5 to 32.7 kw/$m^2$. A direct heating method was used to apply heat to the test section. The boiling heat transfer coefficients of liquid nitrogen were represented as a function of vapor quality, which showed significant drop at the dryout vapor quality. The maximum heat transfer enhancement using the wire coil inserted tubes over the plain tube was $174\%$ for 'Wire 3' having a thickness of 2.5 mm and a pitch of 18.4 mm.

• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.795-802
• /
• 1992

본 연구에서는 일정한 각도의 분사를 갖는 평씨일(plain seal)에 대하여 각 인자들이 누수성능에 미치는 영향을 수치적으로 조사하였다. 인자들로는 축방향 레 이놀즈수, 축회전속도, 분사의 유입속도, 간극비, 분사의 위치 및 유입각 등이 고려되 었다.

• Earthquakes and Structures
• /
• 제14권3호
• /
• pp.187-201
• /
• 2018

The paper describes a modified cyclic bar model including bond-slip phenomena between steel reinforcing bars and surrounding concrete. The model is focused on plain bar and is useful, for its simplicity, for the seismic analyses of RC structures with plain bars and insufficient constructive details, such as in the case of '60s -'70s Mediterranean buildings. The model is based on an imposed exponential displacements field along the bar including both steel deformation and slip; through the adoption of equilibrium and compatibility equations a stress-slip law can be deducted and simply applied, with opportune operations, to RC numerical models. This study aims to update and complete the original monotonic model published by the authors, solving some numerical inconsistencies and, mostly, introducing the cyclic formulation. The first aim is achieved replacing the imposed linear displacement field along the bar with an exponential too, while the cyclic behaviour is described through a formulation based on the results of parametric analyses concerning a large range of steel and concrete properties and geometric configurations. Validations of the proposed model with experimental results available in the current literature confirm its accuracy and the reduced computational burden, highlighting its suitability in performing nonlinear analyses of RC structures.

• 한국생활과학회지
• /
• 제11권3호
• /
• pp.263-271
• /
• 2002

This research was designed to investigate the preference to textiles for shirts of college students. 105 subjects majored in fashion design were surveyed and SPSS WIN 11.0 program was used for statistical analysis. The results of this study were as follows: 1. Design was the primary factor in purchasing a clothing and college students considered color and texture as important factors for clothing materials. 2. There were significant differences in preference to textiles for winter shirts, especially grade and resident area. 3. College students preferred plain wool two and two check foremost as a textile for spring and fall. 4. Plain cotton poplin was the most preferred material for summer. 5. Twill cotton drill was the most preferred textile for winter. 6. Textiles for winter were thicker and heavier than others and natural fiber were preferred such as cotton and wool. 7. Plain weave was preferred for spring. fall and summer, and twill weave for winter. 8. College students preferred plain texture foremost and blue shaded light color was preferred for spring. fall and summer and brown shaded dark color was for winter.

• 음성과학
• /
• 제15권4호
• /
• pp.7-18
• /
• 2008

The purpose of the present study is to test whether VOT values of the Korean plain stops in intervocalic position are encoded differently by individual speakers. In Scobbie (2006), the VOT values to the /p/-/b/ voicing contrast in Shetland Isles English were found to demonstrate a high degree of inter-speaker variation. More importantly such variation was not arbitrary: first, there was an inverse relationship between the amount of prevoicing for /b/ and the duration of aspiration for /p/. Second, the inter-speaker variation was shown to be similar between the subjects and their parents. These results suggest that the phonetic targets for VOT are specified in fine detail by speakers. The present study further explores this issue in terms of testing 1) whether the likelihood and the amount of voicing for the intervocalic plain stops in Korean show inter-speaker variation; 2) whether the likelihood and the exact amount of voicing for the intervocalic plain stops in Korean are closely related to the amount of aspiration for the Korean intervocalic aspirated stops. The results of the study suggest that the voicing of intervocalic plain stops in Korean varied according to the individual speakers, but it did not seem to be directly interrelated with the amount of aspiration of the aspirated stop sin the same phonological position.

• 동력기계공학회지
• /
• 제14권5호
• /
• pp.17-23
• /
• 2010

In recent, the capacity of a commercial wind power has reached the range of 6 MW, with large plants being built world-wide on land and offshore. The rotor blades and the nacelle are exposed to external loads. Wind power system concepts are reviewed, and loadings by wind and gravity as important factors for the mechanical performance of the materials are considered. So, the mechanical properties of fiber composite materials are discussed. Plain woven fabrics Carbon Fiber Reinforced Plastics (CFRP) are advanced materials which combine the characteristics of the light weight, high stiffness, strength and chemical stability. However, Plain woven CFRP composite have a lot of problems, especially delamination, compared with common materials. Therefore, the aim of this work is to estimate the mechanical properties using the tensile specimen and to evaluate strain using the CNF specimen on plain woven CFRP composites. For the strain, we tried to apply to plain woven CFRP using Digital Image Correlation (DIC) method and strain gauge. DIC method can evaluate a strain change so it can predict a location of fracture.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.300-303
• /
• 2010

다양한 형상의 인젝터 내부 젤 추진제 유동을 수치적으로 연구하였다. 모사 젤 추진제의 유변학적물성치를 측정하고 plain-orifice, chamfered-orifice 및 venturi 형상 인젝터의 유동 특성을 분석하였다. Plain-orifice 및 chamfered-orifice 인젝터의 경우 하류방향으로 유동이 진행할수록 점도가 높아지는 특성이 나타났으며 Venturi 형상의 경우 인젝터 내부 유동에서 낮은 점도가 지속적으로 유지됨을 알 수 있었다. Reynolds 수가 증가할수록 이러한 경향이 뚜렷하게 나타나는 것이 확인되었다.

• Computers and Concrete
• /
• 제2권6호
• /
• pp.499-516
• /
• 2005

A composite model is used to represent the heterogeneity of plain concrete consisting of coarse aggregates, mortar matrix and the mortar-aggregate interface. The composite elements of plain concrete are modeled using triangular finite element units which have six interface nodes along the sides. Fracture is captured through a constitutive single branch softening-fracture law at the interface nodes, which bounds the elastic domain inside each triangular unit. The inelastic displacement at an interface node represents the crack opening or sliding displacement and is conjugate to the internodal force. The path-dependent softening behaviour is developed within a quasi-prescribed displacement control formulation. The crack profile is restricted to the interface boundaries of the defined mesh. No re-meshing is carried out. Solutions to the rate formulation are obtained using a mathematical programming procedure in the form of a linear complementary problem. An event by event solution strategy is adopted to eliminate solutions with simultaneous formation of softening zones in symmetric problems. The composite plain concrete model is compared to experimental results for the tensile crack growth in a Brazilian test and three-point bending tests on different sized specimens. The model is also used to simulate wedge-type shear-compression failure directly under the loading platen of a Brazilian test.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제10권4호
• /
• pp.184-191
• /
• 2002

This study concerns the performance of the condensing heat transfer performance of two-phase closed thermosyphons with plain copper tube and tubes having 50, 60, 70, 80, 90 internal micro grooves. Distilled water, methanol, ethanol have been used as the working fluid. The numbers of grooves and operating temperature have been investigated as the experimental parameters. Condensing heat transfer coefficients and heat flux are obtained from experimental data for each case of specific parameter. The experimental results are assessed and compared with existing correlations. The results show that working fluids, numbers of grooves are very important factors for the operation of thermosyphons. The working fluid with high latent heat such as water has a good heat transfer rate compared to methanol and ethanol. The relatively high rate of heat transfer is achieved when the thermosyphon with internal micro grooves is used compared to that with plain tube. Condensing heat transfer coefficient of grooved thermosyphon is 1.5∼2 times higher in methanol and 1.3∼l.5 times higher in ethanol compared to plain tube. The best condensation heat transfer performance is obtained for 60 grooves, and the maximum value of this case is 2.5 times higher than that of the plain tube.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.61-64
• /
• 2009

This study is reviewed fire resistance characteristics of high strength concrete according to changes in PP fiber mixing ratio and type of fine aggregate, and the results can be summarized as follows. As fire resistance characteristics, all plain crushed sands prevented spalling regardless of increase in mixing ratio of PP fiber. Mixtures other than the plain showed satisfactory spalling prevention when 0.05 % or more of PP fiber was mixed. After the fire resistance experiment, the plain showed 5.5 % of mass loss rate when fiber was not mixed and others could not be measured. According to increase in mixing ratio of fiber, river sand with fineness modulus of 2.2 showed most satisfactory result of 34 %${\sim}$42 %. Mass loss rate after fire resistance experiment was most satisfactory at about 10 % in the plain crushed sand without mixing of fiber, and all other mixes with 0.05 % PP fiber or more showed 5${\sim}$10 % loss rate.