• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.476-479
• /
• 2000

This paper deals with a robust pole placement method for uncertain linear systems. For all admissible uncertain parameters, a static output feedback controller is designed such that all the poles of the closed loop system are located within the prespecfied disk. It is shown that the existence of a positive definite matrix belonging to a convex set such that its inverse belongs to another convex set guarantees the existence of the output feedback gain matrix for our control problem. By a sequence of convex optimization the aforementioned matrix is obtained. A numerical example is solved in order to illustrate efficacy of our design method.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1708-1712
• /
• 2008

This paper describes a linear matrix inequality (LMI) approach to the design of robust low-order power system stabilizers (PSSs), which are used to damp out local-mode oscillations of synchronous generators. The performance of a PSS is expressed as the location of the closed-loop poles, and a single fixed-gain pole-placement controller is synthesized for a wide range of operating conditions. The synthesis results in simultaneous regional pole-placement stabilization. and is formulated as an LMI feasibility problem with a rank condition. A penalty method is applied to solve the rank-constrained LMI problem. Numerical experiments with a single-machine connected to an infinite bus system were performed to demonstrate the proposed method.

• 조명전기설비학회논문지
• /
• 제27권11호
• /
• pp.69-75
• /
• 2013

This paper proposes a new algorithm for the optimal placement of a step voltage regulator(SVR) in distribution system with Distributed Generators(DG) using a Particle Swarm Optimization(PSO). The objective function of this algorithm is to find optimal placement for minimum loss while maintaining each node voltage fluctuations within upper and lower limits. In the objective function of proposed algorithm, the deviations to reference voltage and the distribution loss are considered. To verify effectiveness of the proposed method, simulation is implemented using MATLAB.

• 대한전자공학회논문지
• /
• 제21권6호
• /
• pp.85-93
• /
• 1984

본 논문에서는 gate array LSI의 Layout 설계중 새로운 초기 배치 알고리즘을 제안하고 있다. 인간에 의해 작성된 게이트 레벨 논리설계도면상에 모듈의 상대적 위치를 정해진 칩의 셀에 최대한 반영하여 배치할 수 있는 목적함수를 설정하고 그 함수에 의해 초기 배치를 구하였다. 제안한 방법의 유용성을 보이기 위해 이미 사용되고 있는 cluster성장법과 program 실험을 통해 최대 cut 수 및 총배선장을 비교하였다.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.938-945
• /
• 2003

In the present study, the inverse perturbation method is applied to the structural damage detection in conjunction with a system condensation technique. The system condensation technique is adopted to r esolve the problem due to the incomplete measurement of the degrees-of-freedom (DOFs) in a natural mode. However, the numerical difficulty may arise in the system condensation when the DOFs to be measured are not properly selected. Thus, the issue of sensor placement for structural damage detection, in the framework of the condensation technique-based inverse perturbation method, is considered in this study. Also, a methodology to measure the number of sensors required to obtain reliable damage detection is proposed and then verified through some illustrative example problem.

• Communications for Statistical Applications and Methods
• /
• 제19권5호
• /
• pp.721-729
• /
• 2012

Various methods control the influence of a covariate on a response variable. These methods are analysis of covariance(ANCOVA), RANK ANCOVA, ANOVA of (covariate-adjusted) residuals, and Kruskal-Wallis tests on residuals. Covariate-adjusted residuals are obtained from the overall regression line fit to the entire data set that ignore the treatment levels or factors. It is demonstrated that the methods on covariate-adjusted residuals are only appropriate when the regression lines are parallel and covariate means are equal for all treatments. In this paper, we proposed the new nonparametric method on the ANCOVA model, as applying joint placement in a one-way layout on residuals as described in Chung and Kim (2007). A Monte Carlo simulation study is adapted to compare the power of the proposed procedure with those of the previous procedure.

• Journal of the Korean Data and Information Science Society
• /
• 제24권6호
• /
• pp.1401-1408
• /
• 2013

반복이 있는 랜덤화 블록 계획법에서 우산형 대립가설을 검정하기 위한 비모수 방법에는 Kim과 Kim (1992)이 제안한 방법이 있다. 본 논문에서는 Orban과 Wolfe (1982)가 제안한 위치와 Kim (1999)이 제안한 대조군과 처리군의 방법을 확장하여 랜덤화 블록 계획법에서 우산형 대립가설에서의 검정법을 제안하였다. 또한 여러 분포에 대한 모의실험 통하여 기존의 방법과의 검정력을 비교하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권6호
• /
• pp.345-349
• /
• 2017

Reconfiguration is an important method to minimize power loss and load interruption by creating an optimal configuration of a system. Furthermore, by increasing demand and value of consumption, construction of new power plants can be postponed in networks by reconfiguration and proper arrangement of linkage switches. This method is feasible for radial networks, which create meshes of linkage switches. One convenient way to achieve a system with minimal power loss and interruption is to utilize capacitors. Optimal placement and sizing of capacitors in such applications is an important issue in the literature. In this paper, cat swarm optimization is introduced as a new metaheuristic algorithm to achieve this purpose. Simulation has been carried out in two feasible networks, 69-bus and 33-bus systems.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.81-82
• /
• 2016

The present study aims to derive optimal interface treatment conditions for emulating a monolithic construction. The joints in this construction are formed through the bonding shear evaluation method during the placement of ultra-high-performance concrete (UHPC) and normal strength concrete (NSC). The evaluation items include push-off tests for homogeneous UHPC + UHPC and heterogeneous NSC + UHPC. The experimental samples comprised a monolithic placement as the baseline, two levels for the separated placement according to the compression strength of concrete, and five levels for the interface treatment. The increase in the number of grooves and their cross-sectional areas only slightly influenced the bonding shear performance. The optimal interface treatment method for the homogeneous UHPC + UHPC construction grooves was at least 30mm. The heterogeneous NSC + UHPC construction should utilize waterjet roughening to expose the aggregate for the increased roughness.

• 제어로봇시스템학회논문지
• /
• 제6권7호
• /
• pp.611-616
• /
• 2000

This paper presents a design method for the robust flight controller of a hyghly maneuvering aircraft subject to C.G variation. This method is based on LMI(Linear Matrix ZInequality) pole-placement design methodology for the polytopic models. Simulation results show that the proposed LMI-based pole-placement design methodology robustly yields uniform performance with adequate Flying Qualities (FQ) over the entire CG variation range.