DOI QR코드

DOI QR Code

A Study on the Sensor Placement for Structural Damage Detection

구조물의 손상탐지를 위한 센서위치 연구

  • 최영재 (인하대학교 기계공학부) ;
  • 이우식 (인하대학교 기계공학부)
  • Published : 2003.06.01

Abstract

In the present study, the inverse perturbation method is applied to the structural damage detection in conjunction with a system condensation technique. The system condensation technique is adopted to r esolve the problem due to the incomplete measurement of the degrees-of-freedom (DOFs) in a natural mode. However, the numerical difficulty may arise in the system condensation when the DOFs to be measured are not properly selected. Thus, the issue of sensor placement for structural damage detection, in the framework of the condensation technique-based inverse perturbation method, is considered in this study. Also, a methodology to measure the number of sensors required to obtain reliable damage detection is proposed and then verified through some illustrative example problem.

Keywords

References

  1. Doebling, S. W., Farrar, C. R., Prime, M. B. and Shevitz, D. W., 1996, 'Damege Identification and Health Monitoring of Structural and Mechanical Systems from Changes in Their Vibration Characteristics: A Literature Review,' Los Alamos National Laboratory Report LA-13070-MS
  2. Friswell, M. I. and Penny, J. E. T., 1997, 'Is Damage Location Using Vibration Measurements Practical,' EUROMECH International Workshop: DAMAS 97, Structural Damage Assessment Using Advanced Signal Processing Procedures, Sheffield, UK
  3. Zimmerman, D. C. and Kaouk, M., 1994, 'Structural Damage Detection Using .a Minimum Rank Update Theory,' J. of Vibration and Acoustics Transactions of the ASME, Vol. 116, pp. 222-230 https://doi.org/10.1115/1.2930416
  4. Kim, K. O., Anderson, W. J and Sandstrom, R. E., 1983, 'Nonlinear Inverse Perturbation Method in Dynamic Analysis,' AIAA Journal, Vol. 21, No.9, pp. 1310-1316 https://doi.org/10.2514/3.8245
  5. Zimmerman D. C., Smith, S. W., Kim, H. M. and Bartkowicz, T., 1996, 'An Experimental Study of Structural Damage Detection Using Incomplete Measurements,' Journal of Vibration and Acoustics, Vol. 118, No.4, pp. 543-550 https://doi.org/10.1115/1.2888333
  6. James, G. H., Zimmerman, D. C. and Cao, T., 1998, 'Development of a Coupled Approach for Structural Damage Detection with Incomplete Measurements,' AIAA Journal, Vol. 36, No. 12, pp. 2209-2217 https://doi.org/10.2514/2.346
  7. Choi, Y. J., 2001, System Reduction and Selection of Degrees of Freedom in Structural Dynamic Inverse Porblems, Ph. D. Thesis, Inha University
  8. Shah, V. N. and Raymund, M., 1982, 'Analytical Selection of Masters for the Reduced Eigenvalue problem,' International J. for Numerical Methods in Engineering, Vol. 18, No. 1, pp. 89-98 https://doi.org/10.1002/nme.1620180108
  9. Kim, K. O. and Choi, Y. J., 2000, 'Energy Method for Selection of Degrees of Freedom in condensation,' AIAA Journal, Vol. 38, No.7, pp. 1253-1259 https://doi.org/10.2514/2.1095
  10. Penny, J. E. T., Friswell, M. I. and Garvey, S. D., 1994, 'Automatic Choice of Measurement Locations for Dynamic Testing,' AIAA Journal, Vol. 32, No.2, pp.407-414 https://doi.org/10.2514/3.11998
  11. Papadopoulos, M. and Garcia, E., 1998, 'Sensor Placement Methodologies for Dynamic Testing,' AIAA Journal, Vol. 36, No.2, pp. 256-263 https://doi.org/10.2514/2.7509
  12. Kim, K. O., Yoo, H. S. and Choi, Y. J., April 2001, 'Optimal Sensor Placement for dynamic testing of Large Structures,' 42nd AIAA SDM Conference, Seattle, AIAA01-1232
  13. Kammer, D. C., 1991, 'Sensor Placement for On-Orbit Modal Identification and Correlation of Large Space Structures,' Journal of Guidance, Control and Dynamics, Vol. 14, No.2, pp. 251-259 https://doi.org/10.2514/3.20635
  14. Kidder, R. L., 1973, 'Reduction of Structural Frequency Equations,' AIAA Journal, Vol. 11, p.892 https://doi.org/10.2514/3.6852
  15. Flax, A. H., 1975, 'Comment on Reduction of Structural Frequency Equations', AIAA Journal, Vol. 13, pp. 701-702 https://doi.org/10.2514/3.49797
  16. Kidder, R. L., 1975, 'Reply by Author to A. H. Flax,' AIAA Journal, Vol. 13, pp. 702-703 https://doi.org/10.2514/3.49798
  17. Guyan, R. J., 1965, 'Reduction of Stiffuess and Mass Matrices,' AIAA Journal, Vol. 3, No.2, p. 380 https://doi.org/10.2514/3.2874
  18. Kim, K. O. and Kang, M. K., 2001, 'Convergence Acceleration of Iterative Modal Reduction Methods,' AIAA Journal, Vol. 39, No. 1, pp.134-140 https://doi.org/10.2514/2.1281
  19. Choi, Y. J. and Lee, U., 2002, 'System Condensation Technique-Based Inverse Perturbation Method of Damage Detection,' Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 30, No.7, pp. 98-104 https://doi.org/10.5139/JKSAS.2002.30.7.098