• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.16-22
• /
• 2008

We fabricated thermally-evaporated 10 nm-Ni/30 nm and 70 nm Poly-Si/200 nm-$SiO_2/Si$ structures to investigate the thermal stability of nickel silicides formed by rapid thermal annealing(RTA) of the temperature of $300{\sim}1100^{\circ}C$ for 40 seconds. We employed for a four-point tester, field emission scanning electron microscope(FE-SEM), transmission electron microscope(TEM), high resolution X-ray diffraction(HRIXRD), and scanning probe microscope(SPM) in order to examine the sheet resistance, in-plane microstructure, cross-sectional microstructure evolution, phase transformation, and surface roughness, respectively. The silicide on 30 nm polysilicon substrate was stable at temperature up to $900^{\circ}C$, while the one on 70 nm substrate showed the conventional $NiSi_2$ transformation temperature of $700^{\circ}C$. The HRXRD result also supported the existence of NiSi-phase up to $900^{\circ}C$ for the Ni silicide on the 30 nm polysilicon substrate. FE-SEM and TEM confirmed that 40 nm thick uniform silicide layer and island-like agglomerated silicide phase of $1{\mu}m$ pitch without residual polysilicon were formed on 30 nm polysilicon substrate at $700^{\circ}C\;and\;1000^{\circ}C$, respectively. All silicides were nonuniform and formed on top of the residual polysilicon for 70 nm polysilicon substrates. Through SPM analysis, we confirmed the surface roughness was below 17 nm, which implied the advantage on FUSI gate of CMOS process. Our results imply that we may tune the thermal stability of nickel monosilicide by reducing the height of polysilicon gate.

• Knowledge Management Research
• /
• v.9 no.1
• /
• pp.97-116
• /
• 2008

The purpose of this study lies in examining how knowledge management was applied to PMI(Post Merger Integration) in bank merger. Individuals and organizations in Korea have experienced a lot of changes since the 1997 foreign exchange crisis. In such a situation, individuals came to think the only thing to rely on was personal knowledge. Since organizations had to lay off workers in order of their birth year, not based on whether or not individuals had the knowledge necessary for the organizations, they needed to have such a system that could use their explicit knowledge and even outside knowledge or customers' knowledge as IT developed by changing individuals' tacit knowledge into explicit knowledge as needed in order to continue to maintain their competitiveness and for their own development. Thus, each firm started to pitch for the introduction of knowledge management. Individuals started to store their own experience and knowledge in their homepages or blogs. It was Woori Bank, the merged bank of Hanil Bank and Commercial Bank of Korea, that introduced the knowledge management system and Shared Service Center, in which knowledge creation is available, for the first time in the banking business. Its previous name was Hanbit Bank. Hanbit Bank wanted to construct an advanced bank system, bringing in their chief information officer(CIO) from a foreign bank and introducing an IT software used in Spanish banks to adjust all banking processes to it. However, they could not help giving up the plan in the middle of the road since there was a great difference between Spain and Korea in the financial system and more than 30% of software package had to be changed. In this situation, PMI was delayed, and customer inconvenience continued, which made the integration of organizational cultures slow down. As a breakthrough in this situation, knowledge management was introduced. To integrate knowledge of two organizations in the process of PMI is an important job for all merger candidates. This study aims at presenting the successful results from using knowledge management as a means to PMI ahead of other financial institutions so they can apply them to their organizations. PMI was not achieved properly after the two banks had been merged as Hanbit, but entering the era of Woori Bank, workers were integrated under one standard organization following the organizational and knowledge integration, and knowledge management was introduced for an efficient sharing of knowledge among members. A great number of mergers have occurred up to now, but Woori Bank is the first case that used knowledge management as a means to both PMI and competitiveness enhancement. Probably it was an appropriate time when Woori Bank introduced knowledge management as it was organized. Since Hanil Bank and Commercial Bank of Korea had not introduced knowledge management until then, it could use knowledge management as a means to PMI. Using knowledge management, it could create a new organizational culture and increase competitiveness in the banking industry.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.3 s.106
• /
• pp.249-258
• /
• 2006

In this letter, we propose a novel printed helix antenna for RFID reader in UHF band. The printed strip line of the antenna is first wound up outside a polygonal shaped layer and then the winding continues on an inner layer to control the overall gain and the radiation pattern. In addition, the winding pitch angles on each layer have either negative or positive values resulting in the broad CP bandwidth. The detail structure of the antenna was optimized using Pareto genetic algorithm(GA), so as to obtain excellent performances for RFID reader antennas. The optimized two-layered polygonal helix was fabricated on the cardboard of a flexible substrate and the performances were measured and compared with the simulations. The fabricated antenna was made up of copper tape which can adhere to a flexible cardboard and had 21.4 % matching bandwidth, 31.9 % CP bandwidth, readable range of $5.5m^2$ with kr=3.2. Also based on the current distribution of the strip line of the antenna and sensitivity of the antenna bents points, we confirmed that the antenna has the quarter-wave transformer near the feed for the broad matching bandwidth and radiates the traveling wave for the broad CP bandwidth using the bent strip line.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.3
• /
• pp.304-311
• /
• 2014

In this study, to apply hydrogen energy to ship engine and to generate effective hydrogen production, we investigated the effects of high temperature $H_2SO_4$ feed rate and cooling water rate to pump parts with fixed frequency needed to reciprocate motion and a simulation was conducted at each condition. In the fixed frequency and cooling water inlet flow rate of 0.5 Hz and 3.9 kg/s, we changed the high temperature $H_2SO_4$ flow rate to 47.46 kg/s (it is 105 % of 45.2 kg/s), 49.72 kg/s (110 %), and 51.98 kg/s (115 %). Also, at 0.5 Hz and 45.2 kg/s of frequency and high temperature $H_2SO_4$ flow, the thermal hydraulic analysis was performed at the condition of 95 % (3.705 kg/s), 90 % (3.51 kg/s), and 85 % (3.315 kg/s). In overall simulation cases, the physical properties of materials are more influential to the temperature increase in the pump part rather than the changes on the feed rate of high temperature $H_2SO_4$ and cooling water. A continuous operation of pump was also capable even if the excess feed of high temperature $H_2SO_4$ of about 15 % or the less feed of cooling water of about 15 % were performed, respectively. When the increasing feed of high temperature $H_2SO_4$ of up to 5 %, 10 %, and 15 % were compared with base flow (45.2 kg/s), the deviation of time period rose to a certain temperature and ranged from 0 to 4.5 s in the same position (same material). In case of cooling water, the deviation of time period rose to a certain temperature and ranged from 0 to 5.9 s according to the decreasing feed changes of cooling water at 5 %, 10 %, and 15 % compared to a base flow (3.9 kg/s). Finally, the additional researches related to the two different materials (Teflon and STS for Pitch and End-plate), which are concerned about the effects of temperature changes to the parts contacting different materials, are needed, and we have a plan to conduct a follow-up study.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.11 no.2
• /
• pp.82-86
• /
• 2012

Purpose: The purpose of this study was retrospectively to evaluate the results of the modified Kidner procedure for symptomatic accessory navicular in athletes. Materials and Methods: Between July 1999 and December 2004, 26 feet in 22 patients with symptomatic accessory navicular who had underwent modified Kidner procedure were available for clinical follow-up, and 12 cases in 9 patients were available for clinical and radiological follow-up with a minimum follow-up of 5 years were included in this study. All those patients had symptomatic accessory navicular bone who underwent modified Kidner procedure. American Orthopaedic Foot and Ankle Society (AOFAS) midfoot score, Visual Analogue Scale (VAS), and satisfaction rate were investigated. Talo-first metatarsal (T-MT1) angle, talo-calcaneal (TC) angle, and calcaneal pitch (CP) angle were measured in standing lateral radiograms. Results: AOFAS score was improved from $40.8{\pm}7.5$ (32~57) preoperatively to $88.7{\pm}8.0$ (72~100) postoperatively, and the difference was significant (p<0.01). VAS was improved from $7.0{\pm}0.9$ (5~9) preoperatively to $1.8{\pm}0.8$ (1~4) postoperatively, and the difference was significant (p<0.01). At the lastest follow up, 11 feet were very satisfied, 11 feet satisfied, and 4 feet unsatisfied (a satisfaction rate 85.0%). No significant difference was observed for T-MT1 angle (p=0.67), TC angle (p=0.93), and CP angle (p=0.49). Conclusion: Modified Kidner procedure for the symptomatic accessory navicular showed satisfactory results and is appeared to be one of the useful treatments.

• (The) Research of the performance art and culture
• /
• no.39
• /
• pp.279-323
• /
• 2019

The musical characteristics of Fishing songs in North Korean which recorded on Anthology of North Korean Folk Songs were examined in this paper. The results are as follows. Among Fishing songs in North Korea, there are "Rowing Song," the "Song for Hauling Nets," and the "Song for Picking Up Fish" in songs related to walleye pollack fishing and in songs related to croaker fishing, the "Song for Dropping Anchor" and the "Full-Load-of-Fish Song" in songs related to croaker fishing, the "Song for Weighing Anchor," the "Song for Shaking Fish," the "Full-Load-of-Fish Rowing Song," and the "Song for Hanging Walleye Pollack" in songs related to walleye pollack fishing. There are the "Song for Setting a sail" and the "Song for catching shells" in Fishing songs in North Korea, too. In the rhythmic elements of Fishing songs in North Korea, the tempo of the "Songs for Setting a sail" is moderato, and that of the "Songs for Picking Up Fish" of songs related to anchovy or herring fishing is quite slow. "Rowing Songs"(croaker fishing) have various tempos but faster than moderato, and usually get faster and faster as time goes by. Most songs have 4/♩. time and there are some of 2, 3 or 5 time. Some songs use irregular time or 6 time overlapping 2 beats. The mode Menari is the most common tonal system used in fishing songs of North Korea. And the mode Susimga, the mode Changbutaryeong, the mode Nanbongga, and the mode Odolttogi are also used in the tonal system of Fishing songs in North Korea. There are shoutting intonations that have indefinite pitch, too. Modulation or interaction by the mode Changbutaryeong appeared in songs of the mode Menari. There is a tendency to favor a certain tonal system by category. Responsorial form is mostly used, but in the most cases, they were sung in solo. In responsorial songs, several calling songs overlap with the responding songs. Durchkomponiert form is sung by antiphon or in solo, but the case sung in solo originally seems to have been sung by antiphon or unison, if we consider the procedure of the work. The "Song for Picking Up Fish" of Seonbong-gun of North Hamgyeong Province and Yangyang-gun of Gangwon Province, the "Full-Load-of-Fish Song-Bongjuktaryeong" of Jeungsan-gun of South Pyeongan Province and "Full-Load-of-Fish Song-Baechigisory" of Taean-gun of South Chungcheong Province, "Rowing Song" of Nampo City and Ganghwa-gun of Gyeonggi Province are resembled. In neighboring areas, even if the songs of different categorys, sometimes share a same melody. In a certain category, sometimes a same melody is shared to a considerable distance. It was first identified that in anchovy or herring fishing or dybowskii' sand eel fishing, the "Song for Picking Up Fish" is widely shared in the East Sea Coast area.

• Korean Journal of Environment and Ecology
• /
• v.28 no.3
• /
• pp.273-280
• /
• 2014

This study examined whether Dybowski's brown frogs(Rana dybowskii) in noisy highway roadsides had different mating calls from those in natural sites. We selected four study sites: two rice paddy sites in Youngdong Highway roadside and two nearby natural counterparts. Frog calls were recorded between 18:30 and 20:00 on February 24, February 27, and March 14, 2014. Frog calls in the natural sites had fundamental frequency approximately at 700 Hz with two to four apparent harmonics, while frog calls in the highway sites had higher fundamental frequency with up to seven apparent harmonics. Analysis of variance (ANOVA) shows that a roadside site that are directly exposed to highway noise had statistically higher frog calling frequency than other study sites. However, the higher calling frequency was not found in another roadside site that differed in elevation from the highway and was buffered by forests. These results indicate that male frogs in a noisy highway roadside called females with a higher pitch and more apparent harmonics to avoid being masked by highway noise. These results also suggest that there is a threshold noise level that interrupts frog's mating behavior and it is needed to maintain highway roadside noise to this threshold level.

• Journal of Korean Foot and Ankle Society
• /
• v.18 no.2
• /
• pp.62-67
• /
• 2014

Purpose: Reconstructive surgeries for equinocavovarus foot deformities are quite variable, including hind-midfoot osteotomy or arthrodesis, soft tissue procedure, tendon transfers, etc. Comprehensive evaluation of the deformity and its etiology is mandatory for achievement of successful deformity correction. Few studies in this field have been reported. We report on the clinical and radiographic outcome of reconstruction for cavovarus foot deformities. Materials and Methods: The study is based on 16 feet with cavovarus foot deformities that underwent bony and soft tissue reconstructive surgery from 2004 to 2008. We evaluated the etiologies, varieties of surgical procedures performed, pain score, functional scores, and patient satisfaction and measured the radiographic parameters. Results: The average age at the time of surgery was 39.4 years old, with a male/female ratio of 9/4 and an average follow-up period of 23.9 months (range, 12~49 months). The etiologies of the cavovarus deformity were idiopathic 7 feet, residual poliomyelitis 5 feet, Charcot-Marie-Tooth disease 2 feet, and Guillain-Barre syndrome and hemiplegia due to cerebrovascular accident sequela 1 foot each. Lateral sliding calcaneal osteotomies were performed in 12 feet (75%), followed by Achilles tendon lengthening and plantar fascia release in 11 feet (69%), and first metatarsal dorsiflexion osteotomy/arthrodesis and tendon transfer in 10 feet (63%). Visual analogue scale pain score showed improvement, from an average of 4.2 to 0.5 points. American Orthopaedic Foot and Ankle Society ankle-hindfoot score showed significant improvement, from 47.8 to 90.0 points (p<0.05). All patients were satisfied. Ankle range of motion improved from $27.5^{\circ}$ to $46.7^{\circ}$. In radiographic measurements, calcaneal pitch angle improved from $19.1^{\circ}$ to $15.8^{\circ}$, Meary angle from $13.0^{\circ}$ to $9.3^{\circ}$, Hibb's angle from $44.3^{\circ}$ to $37.0^{\circ}$, and tibio-calcaneal axis angle from varus $17.5^{\circ}$ to varus $1.5^{\circ}$ Conclusion: We achieved successful correction of cavovarus foot deformities by performing appropriate comprehensive reconstructive procedures with improved functional, radiographic measures and high patient satisfaction.

• Journal of the Korean Society of Costume
• /
• v.41
• /
• pp.185-206
• /
• 1998

The purpose of this study was to improve productivity for maximum effects with the present equipments and staff. This study compared and analyzed the mea-sured time by using stop watch method and MTM, which was the new measuring method. The flow and results of this study were as follows: 1. This study investigated the theoretical background the efficiency for production management, and the way of productivity improvement through documentary research. 2. Setting up the standard flow on the experi-mental company production, making out a process chart and measuring the actual working hour. 3. The study measured the allowance time applying work sampling. 4. Each process of the movement analysis was filmed by video to use basic data. 5. MTM analysis was taken by choosing 10 processes from front bodice according to the basic movement of MTM. Through the results, this study exclude unneccesary movements and suggest a method for working ways. 6. Using the actual working hour measured by a stop watch calculated the pitch time and presumed the amount of daily productivity. 7. The result of the work sampling came out as 38% of allowance rate. It was 13% higher than the standard amount of woman's jacket allowance rate, which was 25%. The most influencing factor was work discussion. That was because there were commuication problem of the work way between the operator and leader. More adequate use of flow table and level passing table was needed. There were the problems that inappropriate places and sizes made the distance of movements longer and often needed more adjustment of works and surroundings. To prevent breakdowns equipments check ups were necessary before works. 8. The results of MTM analysis were as follow : the time was reduced 40% than the actual measured time by a stop watch. This was because the leveling of the operator was included in the real calculation. Also, leveling was included in MTM analysis and all the conditions were standarized. Therefore MTM method was a scientidic measuring way of establishing the standard time. The presented method of this study, suggested an ideal method eliminating unneccesary motions, and presented standardization of works. Improvement of working methods, work condition and simplifying motions in each 10 processes reduced the working time from total 656 seconds to 301 seconds. 9. The way and time of working was linked together in the MTM analysis methods. Thus data from MTM help suggest not only establishing standard time but also establishing stan-dard work. Plus it includes various ability for improvements of working ways. So it is an objective method which can be widely used in other work studies. 10. The function of a time study is to determine the amount of work produced with a given method. The work rate is used to establish the cost of labor. The wage of worker must be calculated per unit time which is deter-mined before the time study is made. This study tried to introduce the incentive rule for deciding wages according to the standard time by MTM method.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.22-29
• /
• 2011

An infrared thermographic imaging module of [$320{\times}256$] focal-plane array (FPA) based on [InAs/GaSb] strained-layer superlattice (SLS) was fabricated, and its images were demonstrated. The p-i-n device consisted of an active layer (i) of 300-period [13/7]-ML [InAs/GaSb]-SLS and a pair of p/n-electrodes of (60/115)-period [InAs:(Be/Si)/GaSb]-SLS. FTIR photoresponse spectra taken from a test device revealed that the peak wavelength (${\lambda}_p$) and the cutoff wavelength (${\lambda}_{co}$) were approximately $3.1/2.7{\mu}m$ and $3.8{\mu}m$, respectively, and it was confirmed that the device was operated up to a temperature of 180 K. The $30/24-{\mu}m$ design rule was applied to single pixel pitch/mesa, and a standard photolithography was introduced for [$320{\times}256$]-FPA fabrication. An FPA-ROIC thermographic module was accomplished by using a $18/10-{\mu}m$ In-bump/UBM process and a flip-chip bonding technique, and the thermographic image was demonstrated by utilizing a mid-infrared camera and an image processor.