• 제목/요약/키워드: pitch treatment

검색결과 202건 처리시간 0.033초

포토 리소그래피 공정을 이용한 DLC 마이크로 패턴 원통 금형 제작 (Fabrication of DLC Micro Pattern Roll Mold by Photolithography Process)

  • 하태규;김정완;이태동;윤수종;김태규
    • 열처리공학회지
    • /
    • 제31권2호
    • /
    • pp.63-67
    • /
    • 2018
  • Recent mold industry uses many roll-to-roll processes that can produce high production speed and precision machining and automation process. In the circular cylinder mold, however, patterns of less than $10{\mu}m$ are difficult to manufacture and maintain. In this study, we fabricated a circular cylindrical mold with a DLC thin film which have high hardness, low coefficient of friction and high releasability by using lithography and lift-off process. The height, line width, and pitch of the fabricated DLC macro pattern are $3.1{\mu}m$, $9.1{\mu}m$ and $20.2{\mu}m$, respectively. The pattern size is finer than the current applied to the aluminum cylinder type, and this shows the possibility of practical use of DLC micro pattern roll mold.

Balancing 모듈 설계를 위한 Differential Gear System의 구조해석에 관한 연구 (Structural Analysis of Differential Gear System for Balancing Module Design)

  • 장태환;김동준;문창호;이성재;김태규
    • 열처리공학회지
    • /
    • 제32권6호
    • /
    • pp.270-274
    • /
    • 2019
  • In this study, simulation structure analysis was performed for the differential gear system for passenger cars as a prerequisite for the design of the balancing module. The differential gear system was modeled by using CATIA and simulation structure analysis was performed using ANSYS software. The material of the modeled differential gear system uses the mechanical properties of S45C (Q&T). In the structural analysis of the differential gear, the areas where the maximum stress and the maximum strain occurred can be identified. The maximum stress and maximum strain occurred in the pitch circle of the bevel gear. In evaluating the safety factor, it was found that sufficient safety factor was secured. Based on the analysis results for the differential gear, it is expected that it will be a good reference if we design the balancing module device.

연축성 발성장애와 음성 진전 환자의 감별 (Differences in Patient Characteristics between Spasmodic Dysphonia and Vocal Tremor)

  • 손희영
    • 대한후두음성언어의학회지
    • /
    • 제32권1호
    • /
    • pp.9-14
    • /
    • 2021
  • Spasmodic dysphonia, essential tremor, and vocal tremor related with Parkinson's disease are different disorders showing fairly similar symptoms such as difficulty in the speech onset, and tremble in the voice. However, the cause and the resulting treatment of these diseases are different. Spasmodic dysphonia is a vocal disorder characterized by spasms of the laryngeal muscles during a speech, invoking broken, tense, forced, and strangled voice patterns. Such difficult-to-treat dysphonia disease is classified as central-origin-focal dystonia, of a yet unknown etiology. Its symptoms arise because of intermittent and involuntary muscle contractions during speech. Essential tremor, on the other hand, is characterized by a rhythmic laryngeal movement, resulting in alterations of rhythmic pitch and loudness during speech or even at rest. Severe cases of tremor may cause speech breaks like those of adductor spasmodic dysphonia. In the case of hyper-functional tension of vocal folds and accompanying tremors, it is necessary to distinguish these disorders from muscular dysfunction. A diversified assessment through the performance of specific speech tasks and a thorough understanding for the identification of the disorder is necessary for accurate diagnosis and effective treatment of patients with vocal tremors.

포토리소그래피 공정에 의한 마이크로 패턴 제작과 tribology 특성 연구 (A Study on Micropattern Fabrication and Tribology Characteristics by Photolithography Process)

  • 장태환;박진혁;권영우;조보람;김태규
    • 열처리공학회지
    • /
    • 제36권3호
    • /
    • pp.137-144
    • /
    • 2023
  • Micro electro mechanical systems (MEMS) and precision machines require excellent friction and wear characteristics to improve energy efficiency generated during sliding motion. In this study, DLC thin film with high hardness and low friction was deposited on STS304 substrate material by CVD method, and dot-shaped convex and concave micropatterns were fabricated by photolithography process. The diameter of the pattern was 20 ㎛, the pitch was 40 ㎛, and a pattern having a mesh type arrangement was fabricated and an abrasion test was performed. The results of the wear test on the micro pattern confirmed that the friction coefficient characteristics were improved compared to STS 304 and DLC thin films. In addition, in this result, the micro-pattern showed 11.4% more improved friction coefficient than the DLC thin film. The friction coefficient characteristics for convex and concave patterns of the same size showed almost similar results.

사이버나이프 6-D Skull Tracking의 유용성 평가 (The variability of 6-D Skull Tracking(6DST) in Cyberknife for Bone metastasis patients)

  • 이건호;배선명;송흥권;백금문
    • 대한방사선치료학회지
    • /
    • 제30권1_2호
    • /
    • pp.41-47
    • /
    • 2018
  • 목 적 : 사이버나이프(Accuray Inc., Sunnyvale, CA)를 이용한 제1, 2경추의 정위체부방사선치료(Stereotactic Body Radiation Therapy, SBRT)시 사용가능한 Xsight Spine Tracking(XST)과 6-Dimensional Skull Tracking(6DST)의 비교를 통해 6DST의 유용성을 평가하고자 한다. 대상 및 방법 : 2017년 1월부터 9월까지 본원에서 사이버나이프를 이용하여 제1, 2경추에 SBRT를 진행한 환자 9명을 대상으로, 전산화단층촬영장치(Lightspeed VCT 64, General Electric Co. Waukesha, WI, USA)를 이용해서 컴퓨터 단층 영상(Computed tomography) 을 획득한 후 전산화치료계획시스템(Multiplan system Version 4.6, Accuray, US)를 이용해 제 1, 2경추에 대한 XST와 6DST가 가능한 계획을 수립하였다. 1차 영상 유도를 통해 환자 자세를 보정한 후 동일 환자에 대한 XST와 6DST를 순서대로 진행하고 측정된 결과값을 비교 평가하였다. 결 과 : 제1경추를 대상으로 XST을 실시한 후 측정된 6D Couch 의 Y, Z, X 축 값과 Roll, Pitch, Yaw 값 중 최대값은 0.9 mm, 0.9 mm, 0.7 mm과 $1.0^{\circ}$, $1.0^{\circ}$, $1.2^{\circ}$로 측정되었고, 6DST의 경우 0.7 mm, 0.7 mm, 0.9 mm과 $0.5^{\circ}$, $0.9^{\circ}$, $0.8^{\circ}$로 측정되었다. 제2경추의 XST를 실시했을 때 측정된 값 중 최대값은 0.7 mm, 0.7 mm, 0.8 mm과 $0.9^{\circ}$, $1.0^{\circ}$, $1.8^{\circ}$였고, 6DST의 경우 0.9 mm, 0.7 mm, 0.9 mm와 $0.9^{\circ}$, $0.9^{\circ}$, $1.0^{\circ}$로 측정되었다. 결 론 : 이번 연구를 통해서 제 1, 2 경추에 대한 XST와 6DST의 6D Couch 측정값이 모두 본원에서 기준으로 하고 있는 범위 안에서 측정되고 있음을 확인할 수 있었다. 또한 두 방법을 진행하는 과정에서 설정값 변경을 진행해야하는 XST보다 6DST가 영상유도절차를 간소화 시킬 수 있다는 것을 확인할 수 있었다. 따라서 제 1, 2 경추에 대한 SBRT를 진행할 경우 XST와 더불어서 6DST를 사용한다면 정확한 치료와 더불어서 치료 시간을 단축시킬 수 있을 것으로 사료된다.

  • PDF

구형 활성탄소의 합성 및 응용 (Synthesis and Applications of Spherical Active Carbon Materials)

  • 김홍경
    • 융복합기술연구소 논문집
    • /
    • 제3권1호
    • /
    • pp.45-49
    • /
    • 2013
  • Spherical active carbon materials have been used for the removal of pollutants in the area of food processing, water treatment, air purification, oral administration. Moreover, they are now expected to make an epoch in the areas of electronics, life science, environmental technology, and so on due to their superior physical properties. Carbon particles should be requested for the edgeless spherical shapes in order to minimize the loss due to the abrasion during the process and/or practical use, but the carbon particles manufactured from petroleum-based pitch do not meet these needs. Nowadays, thus, the spherical active carbon particles carbonized from various spherical polymer beads are studied with thermoplastic and/or thermosetting polymers. In this paper, the synthesis of spherical phenolic beads and furan beads, which are thermosetting polymers, and their carbonization techniques are examined.

  • PDF

FLIP CHIP SOLDER BUMPING PROCESS BY ELECTROLESS NI

  • Lee, Chang-Youl;Cho, Won-Jong;Jung, Seung-Boo;Shur, Chang-Chae
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
    • /
    • pp.456-462
    • /
    • 2002
  • In the present work, a low cost and fine pitch bumping process by electroless Ni/immersion Au UBM (under bump metallurgy) and stencil printing for the solder bump on the Al pad is discussed. The Chip used this experimental had an array of pad 14x14 and zincate catalyst treatment is applied as the pretreatment of Al bond pad, it was shown that the second zincating process produced a dense continuous zincating layer compared to first zincating. Ni UBM was analyzed using Scanning electron microscopy, Energy dispersive x-ray, Atomic force microscopy, and X-ray diffractometer. The electroless Ni-P had amorphous structures in as-plated condition. and crystallized at 321 C to Ni and Ni$_3$P. Solder bumps are formed on without bridge or missing bump by stencil print solder bump process.

  • PDF

Acoustic Analysis of Speech Disorder Associated with Motor Aphasia - A Case Report -

  • Ko, Myung-Hwan;Kim, Hyun-Ki;Kim, Yun-Hee
    • 음성과학
    • /
    • 제7권1호
    • /
    • pp.97-107
    • /
    • 2000
  • Motor aphasia is an affection frequently caused by insult of the left middle cerebral artery and usually accompanied by a large lesion involving the Broca's area and the adjacent motor and premotor areas. Therefore, a patient with motor aphasia commonly shows articulatory disturbances due to failure of the motor programing of speech sound. Objective assessment and treatment of phonologic programing is one of the important aspects of speech therapy in aphasic patients. We analyzed the speech disorders acompanied with motor aphasia in a 45-year-old man using a computerized sound spectrograph, Visi-$Pitch{\circledR}$, and Multi-Dimensional Voice $Program{\circledR}$. We concluded that a computerized speech analysis system is a useful tool to visualize and quantitatively analyse the severity and progression of dysarthria, and the effect of speech therapy.

  • PDF

Development of the Practical and Adaptive Die of Piloting Stripper Type for sheet Metal(Part 2)

  • Sim, Sung-Bo;Sung, Yul-Min;Song, Yong-Seok;Park, Hae-Kyoung
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2000년도 추계학술대회 논문집
    • /
    • pp.114-117
    • /
    • 2000
  • In order to keep the zero defect of production in press working process. The optimum design of the production part, strip process layout, die design, die making and try out etc. are necessary the analysis of effective factors. For example, theory and practice of metal shearing process and it's phenomena, die structure, machine tool working for die making, die materials and it's heat treatment, metal working in field, their know how tc. are included in those factors. In this study, we analyzed whole of data base, theoretical back ground of metal working process, and then performed the progressive die tryout with the screw press. Part 2 of this study reveals with precision progressive die design, its making and tryout.

  • PDF

초발수 기판의 친수 패터닝을 이용한 금속배선화 (Patterning of Super-hydrophobic Surface Treated Polyimide Film)

  • 나종주;엄대용;이건환;최두선;김완두
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.1553-1555
    • /
    • 2008
  • Super-hydrophobic treated Polyimide film was used as a flexible substrate for developing a new method of metallization. Hydrophilic patterns were fabricated by IN irradiation through shadow mask. Patterned super-hydrophobic substrate was dipped into a bath containing silver nano ink Silver ink was only coated on hydrophilic patterned area. Metal lines of $600{\mu}m$ pitch were fabricated successfully. However, their thickness was too thin to serve as interconnection. To overcome this problem, iterative dipping was conducted. After repeating five times, the thickness of silver metal lines were increased to over than $2{\mu}$. After heat treatment of silver lines, their resistivities were reduced to order of $30{\mu}{\Omega}$-cm the similar level of values reported in other literatures. So, a new method of metallization has high potential for application of RFID antenna and flexible electronics substrates.

  • PDF