• Carbon letters
• /
• 제23권
• /
• pp.22-29
• /
• 2017

The compressive strength and electrical resistance of pitch-based carbon fiber (CF) in cementitious materials are explored to determine the feasibility of its use as a functional material in construction. The most widely used CFs are manufactured from polyacrylonitrile (PAN-based CF). Alternatively, short CFs are obtained in an economical way using pitch as a precursor in a melt-blown process (pitch-based CF), which is cheaper and more eco-friendly method because this pitch-based CF is basically recycled from petroleum residue. In the construction field, PAN-based CFs in the form of fabric are used for rehabilitation purposes to reinforce concrete slabs and piers because of their high mechanical properties. However, studies have revealed that construction materials with pitch-based CF are not popular. This study explores the compressive strength and electrical resistances of a cement paste prism using pitch-based CF.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.313-320
• /
• 2018

As carbon fiber reinforced composites(CFRP) are widely used in aerospace, automobile, marine, and sports goods applications, they have been studied extensively by various researchers. However, CFRP have been pointed out because of machining problems such as delamination and burr phenomenons. Especially, hole machining process, drilling, has non-smooth features on inlet and outlet surfaces of drilled hole. This kind of machining problem can be controlled to some extent by using high modulus pitch-CF, which has considerable effects on fracture behavior of composite compared with only PAN CF composite. Therefore, PAN and pitch hybridized CF composites were prepared having high strength and modulus. The results demonstrate that the hybrid CFRP specimens with pitch CF offer the good potential to enhance modulus as well as strength properties. Dynamic mechanical, flexural, and impact properties were measured and analyzed. Morphological surface of the composites were also observed by IFS-28, canon after hole machining.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.121-124
• /
• 2005

This paper was about experimental test properties by mechnical joint of CF1263/Epoxy Al honeycomb panels. In case of mechanical joint using screw, nut shall be secured over than minimize third screw pitch. In case of insert backsheet for increase of joint force, increase weight for assemble by screw pitch. In case of insert backsheet with CF1263/Epoxy, predominant save weight and minimazer of displacement by tensile weight moreover predominant strength. In case of mechanical joint by rivet, rivet of Monobolt has over-hole in hole of CF1263/Epoxy but rivet of PROTRUDING has predominant of mechanical joint.

• 한국통신학회논문지
• /
• 제40권9호
• /
• pp.1837-1845
• /
• 2015

도심지환경에서 정확한 차량 위치를 추정하기 위해서는 종방향 속도가 필요하다. 이러한 종방향 속도는 노면경사, 즉 차량의 피치각(Pitch) 산출을 통해서 가능하다. 하지만 단일 센서와 알고리즘을 이용한 피치각 추정에는 정확한 값을 기대할 수 없다. 본 논문에서는 정확한 피치각 추정을 위해 AKF(Adaptive Kalman Filter)와 CF(Complementary Filter)로 구성된 ACF(Adaptive Complementary Filter)를 이용하여 IMU(Inertial Measurement Unit)의 프로세스 노이즈와 측정에러를 주행환경에 맞게 조절하고, 이에 GPS(Global Positioning System)와 OBD(Onboard Equipment) 데이터를 융합한다. 그리고 노면 경사 모델에 따른 필터에 시스템 모델 최적화를 위해 IMMKF(Interactive Multiple Model Kalman Filter)를 사용하여 주행환경에 적합한 최종 피치각을 추정한다.

• Carbon letters
• /
• 제3권2호
• /
• pp.80-84
• /
• 2002

The surface treatment of C-type isotropic pitch-based carbon fiber was carried out by anodic oxidation in 5 wt% $NH_4NO_3$ electrolyte. The changes of fiber surface and carbon fiber/ABS resin composites were characterized by SEM, XPS and mechanical properties test. The oxygen functional groups on the surface, such as hydroxyl (-C-OH), carboxyl (-COOH) groups etc., increased after oxidation. Tensile strength, flexural strength and modulus of carbon fiber/ABS composites were also enhanced. However, the impact strength decreased with the improvement of the surface adhesion between CF and matrix.

• Carbon letters
• /
• 제4권4호
• /
• pp.168-174
• /
• 2003

Silver nitrate ($AgNO_3$) powder was mixed into a reformed pitch precursor. Then, the silver-containing pitch was melt spun to form round and "C" shape fibers. A wire mesh was inserted prior to the nozzle to improve the spinnability of the silvercontaining precursor pitch. Silver particles in the carbon fibers (CFs) were detected by XRD and TEM. These tests showed that silver particles were uniformly distributed and the total amount of silver remained constant during stabilization and carbonization. Next, the silver-containing CFs were activated by steam diluted in nitrogen gas. Silver particles accelerated the activation rate, but the specific surface areas of the silver-containing ACFs were similar to those of non-silver containing ACFs at the same burn-off levels. The specific surface area of the C-shaped activated carbon fibers was larger than that of the round activated carbon fibers. The likely reason is that the surface area of a C-shaped CF is about two times larger than that of a round CF when equivalent cross-sectional areas are compared. A small amount of silver particles in the periphery of the CFs was removed during the activation, but the remainder of silver was stayed within the ACFs.

• 한국재료학회지
• /
• 제5권2호
• /
• pp.215-222
• /
• 1995

C형 및 중공형 탄소섬유는 방직(spinning)시 홀의 전단응력을 원형의 그것에 비해서 더 광범위하게 걸쳐받게 됨으로 분자배향을 고도로 유도할 수가 있다. 핏치계 이방성 중공 및 C형 탄소섬유 강화재의 축 횡방향 열전도도를 에폭시 모재 하에서 실험하였다. 열이방성 정도에 있어 원형 탄소섬유 보강재인 경우 50 정도 였으나, C형과 중공형 보강재는 최고치로 대략 130과 118 정도를 보임으로써 원형 강화재 보다 200%이상 우수한 열이방성을 보였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.144-149
• /
• 1993

The results of an experimental study on the manufacture and the mechanical properties of carbon fiber reinforced silica fume.cement composites and light weight fly ash.cement composites are presented in this paper. The CF reinforced silica fume.cement composites using silica fume early strength cement were prepared with Pan-derived or Pitch-derived CF, and Lt. Wt, fly ash.cement composites using fly ash, early strength cement, perlite and a small amount of foaming agent. As the test results show, the flexural strength, toughness and ductility of CF reinforced silica fume .cement composites were remarkably increased by fiber contents. Also, the manufacturing process technology of Lt. Wt. fly ash.cement composites was developed and its optimum mix proportions were proposed. And the compressive and flexural strength of the fly ash.cement composites by hot water cured were improved even more than by moist cured, but are decreased by increasing fly ash replaced ratio for cement.

• 공업화학
• /
• 제17권2호
• /
• pp.158-162
• /
• 2006

새로운 극자외선 리소그래피용 화학증폭형 레지스트의 매트릭스 수지로 poly[4-hydroxystyrene-co-2-(4-methoxybutyl)-2-adamantyl methacrylate]를 합성하고 평가하였다. 이 중합체로 제조된 레지스트로 KrF 엑시머 레이저 노광장비를 사용하여 선폭 120 nm (피치 240 nm)를 구현할 수 있었다. 극자외선 리소그래피 장비를 이용하여 평가한 결과 선폭 50 nm (피치 180 nm)의 포지형 패턴을 얻었다. $CF_{4}$ 플라즈마를 이용한 건식에칭내성 평가 결과 기존 원자외선 레지스트용 매트릭스 수지인 poly(4-hydroxystyrene)보다 약 10% 향상되었다.

• Current Optics and Photonics
• /
• 제7권5호
• /
• pp.485-495
• /
• 2023

The pixel size in high-resolution complementary metal-oxide-semiconductor (CMOS) image sensors continues to shrink due to chip size limitations. However, the pixel pitch's miniaturization causes deterioration of optical performance. As one solution, a quad color filter (CF) array with pixel binning has been developed to enhance sensitivity. For high sensitivity, the microlens structure also needs to be optimized as the CF arrays change. In this paper, the covered microlens, which consist of four microlenses covered by one large microlens, are proposed for the quad CF array in the backside illumination pixel structure. To evaluate the optical performance, the suggested microlens structure was simulated from 0.5 ㎛ to 1.0 ㎛ pixels at the center and edge of the sensors. Moreover, all pixel structures were compared with and without in-pixel deep trench isolation (DTI), which works to distribute incident light uniformly into each photodiode. The suggested structure was evaluated with an optical simulation using the finite-difference time-domain method for numerical analysis of the optical characteristics. Compared to the conventional microlens, the suggested microlens show 29.1% and 33.9% maximum enhancement of sensitivity at the center and edge of the sensor, respectively. Therefore, the covered microlens demonstrated the highly sensitive image sensor with a quad CF array.