• Journal of the Korean Society for information Management
• /
• v.41 no.1
• /
• pp.1-30
• /
• 2024

The purpose of this study is to develop a diagnostic tool to strengthen the reading competencies of children and adolescents with disabilities, analyze its validity and reliability, and present basic data for the development of a diagnostic program. For this study, it was conducted on literature and case studies, the Delphi Method, and a preliminary survey of actual disabled children/adolescents. As a result of the study, there were limitations in validity and reliability analysis due to the small number of samples, but basic data was secured along with the development of a prototype diagnostic tool for the reading ability of children and adolescents with disabilities. It was proposed to develop the future reading competency diagnostic program by expanding it to the web and mobile platforms, considering various variables such as the characteristics of each disability type, a plan for data collection and utilization through big data, diagnostic procedures, and precautions during the diagnosis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.157-164
• /
• 2016

In this study, researchers performed preliminary design and numerical analysis for a pilot-scale helium heating system intended to support full-scale construction for a sulfur-iodine (SI) cycle. The helium heat exchanger used a liquefied petroleum gas (LPG) combustor. Exhaust gas velocity at the heat exchanger outlet was approximately 40 m/s based on computational thermal and flow analysis. The maximum gas temperature was reached with six baffles in the design; lower gas temperatures were observed with four baffles. The amount of heat transfer was also higher with six baffles. Installation of additional baffles may reduce fuel costs because of the reduced LPG exhausted to the heat exchanger. However, additional baffles may also increase the pressure difference between the exchanger's inlet and outlet. Therefore, it is important to find the optimum number of baffles. Structural analysis, followed by thermal and flow analysis, indicated a 3.86 mm thermal expansion at the middle of the shell and tube type heat exchanger when both ends were supported. Structural analysis conditions included a helium flow rate of 3.729 mol/s and a helium outlet temperature of $910^{\circ}C$. An exhaust gas temperature of $1300^{\circ}C$ and an exhaust gas rate of 52 g/s were confirmed to achieve the helium outlet temperature of $910^{\circ}C$ with an exchanger inlet temperature of $135^{\circ}C$ in an LPG-fueled helium heating system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.56-63
• /
• 2018

The management of Combined Sewer Overflows(CSOs) and Separated Sewer Overflows(SSOs) discharge directly to the effluent system in an untreated state, which occurs when the facility capacity is exceeded due to heavy rain, has become an important issue in recent years as the heavy rain becomes a regular phenomenon. Despite the continuous development of filtration technology, targeting densely populated urban areas, CSOs are rarely applied. Therefore, this study was carried out to optimize the process to apply CSOs in a pilot-scale horizontal flow filtration system with a rope-type synthetic fiber. The research was carried out in two steps: a preliminary study using artificial samples and a field study using sewage. In the preliminary study using an artificial sample, head loss of the filter media itself was analyzed to be approximately 1.1cm, and the head loss was increased by approximately 0.1cm as the linear velocity was increased by 10m/hr. In addition, the SS removal efficiency was stable at 81.4%, the filtration duration was maintained for more than 6 hours, and the average recovery rate of 98% was obtained by air backwashing only. In the on-site evaluation using sewage, the filtration duration was approximately 2 hours and the average removal efficiency of 83.9% was obtained when belt screen (over 450 mesh) was applied as a pre-treatment process to prevent the premature clogging of filter media. To apply the filtration process to CSOs and SSOs, it was concluded that the combination with the pre-treatment process was important to reinforce the hydraulic dimension for the stable maintain of operation period, rather than efficiency. Compared to the dry season, the quality of incoming sewage was lower in the rainy season, which was attributed to the characteristics of the drainage area with higher sanitary sewerage. In addition, the difference in removal efficiency according to the influent quality of the wet season and dry season was small.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.344-357
• /
• 2020

Strain improvement and bioprocess development were undertaken to enhance hyaluronic acid(HA) production by Streptococcus zooepidemicus cells. Using a high-yielding mutant strain, statistical medium optimization was carried out in shake flask cultures, resulting in 52% increase in HA production (5.38 g/l) at the optimal medium composition relative to the parallel control cultures. For sufficient supply of dissolved oxygen (DO), which turned out to be crucial for enhanced production of HA, agitation system and speed were intensively investigated in 5 L bioreactor cultures. Increase in oxygen mass transfer coefficient (k_La) through increment of agitation speed (rpm) and 35% expansion of diameter of the newly-designed impellers showed significantly positive effects on HA production. By installing an expanded Rushton-turbine impeller for efficient break-down of sparged air, and an extended marine impeller above the Rushton-turbine impeller for efficient mixing of the air-born viscous fermentation broth, maximum amount of HA (9.79 g/l) was obtained at 450 rpm, 1.8 times higher level than that of the corresponding flask culture. Subsequently, the possibility of bioprocess scale-up to a 50 L bioreactor was investigated. Despite almost identical maximum HA production (9.11 vs 9.25 g/l), the average HA volumetric productivity (r_p) of the 50 L culture turned out only 74% compared to the corresponding 5 L culture during the exponential phase, possibly caused by shear damages imposed on the producing cells at the high stirring in the 50 L culture. The scale-up process could be successfully achieved if a scale-up criterion of constant oxygen mass transfer coefficient (k_La) is applied to the 50 L pilot-scale bioreactor system.

• Korean Journal of Poultry Science
• /
• v.21 no.1
• /
• pp.1-19
• /
• 1994

This study was carried out to investigate the effects of shperical surface of eggs tray and eggshell on breaking strength of eggs for the development of a new egg tray design to prevent eggshell breakage. The results obtained were as follows: 1. According to the results obtained from investigation on the types of 22 egg trays collected from 9 countries(USA, Italy, France, Thailand, Japan, Netherland, Russia, Korea and Swiss), all egg trays except those from Korea were different in their types. 2. According to the determination of breaking strength for 4 pilot egg trays, type B and D were high in breaking strength. Trays B and D which would fit with the spherical surface of egg so that they could increase breaking strength were most recommendable. Breaking strength was not increased even though egg tray was strong. Thickness of eggshell of experimental eggs used in this experiment have no significance (P>0.05). 3. When eggs are packed and transported in egg tray, the breaking strength will depend on how much spherical surface of egg are covered by the spherical surface of the egg tray. Therefore, the inner spherical surface of egg tray must fit to the outer spherical surface of eggs when the egg tray is manufactured. 4. At present, there is only one type of egg tray being used in Korea despite the various egg sizes. In order to minimize the eggshell breakage, however, proper sizes or types of egg trays should be developed for each different categories of the egg size.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.106-116
• /
• 2016

MTO (Make to Order) is a manufacturing process in which manufacturing starts only after a customer's order is received. Manufacturing after receiving customer's orders means to start a pull-type supply chain operation because manufacturing is performed when demand is confirmed, i.e. being pulled by demand (The opposite business model is to manufacture products for stock MTS (Make to Stock), which is push-type production). There are also BTO (Build to Order) and ATO (Assemble To Order) in which assembly starts according to demand. Lean manufacturing by MTO is very efficient system. Nevertheless, the process industry, generally, which has a high fixed cost burden due to large-scale investment is suitable for mass production of small pieces or 'mass customization' defined recently. The process industry produces large quantities at one time because of the lack of manufacturing flexibility due to long time for model change or job change, and high loss during line-down (shutdown). As a result, it has a lot of inventory and costs are increased. In order to reduce the cost due to the characteristics of the process industry, which has a high fixed cost per hour, it operates a stock production system in which it is made and sold regardless of the order of the customer. Therefore, in a business environment where the external environment changes greatly, the inventory is not sold and it becomes obsolete. As a result, the company's costs increase, profits fall, and it make more difficult to survive in the competition. Based on the customer's order, we have built a new method for order system to meet the characteristics of the process industry by producing it as a high-profitable model. The design elements are designed by deriving the functions to satisfy the Y by collecting the internal and external VOC (voice of customer), and the design elements are verified through the conversion function. And the Y is satisfied through the pilot test verified and supplemented. By operating this make to order system, we have reduced bad inventories, lowered costs, and improved lead time in terms of delivery competitiveness. Make to order system in the process industry is effective for the display glass industry, for example, B and C groups which are non-flagship models, have confirmed that the line is down when there is no order, and A group which is flagship model, have confirmed stock production when there is no order.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.1-11
• /
• 2006

The aim in this study is to develop the combined EGR system with a non-thermal plasma reactor for reducing exhaust emissions and improving fuel economy in turbo intercooler ECU common-rail diesel engines. In this study, the characteristics of soot, CO and $CO_2$ emissions under four kinds of engine loads are experimentally investigated by using a four-cycle, four-cylinder, direct injection type, water-cooled turbo intercooler ECU common-rail diesel engine with a combined plasma exhaust gas recirculation(EGR) system operating at three kinds of engine speeds. The EGR and non-thermal plasma reactor system are used to reduce $NO_x$ emissions, and the non-thermal plasma reactor and turbo intercooler system are used to reduce soot and THC emissions. The plasma system is a flat-to-flat type reactor operated by a plasma power supply. The fuel is sprayed by pilot and main injections at the variable injection timing between BTDC $15^{\circ}$ and ATDC $1^{\circ}$ according to experimental conditions. It is found that soot emissions with increasing EGR rate are increased, but are decreased as the applied electrical voltage of the non-thermal plasma reactor is elevated at the same engine speed and load. Results also show that CO and $CO_2$ emissions are increased as EGR rate is elevated, and CO emissions are increased, but $CO_2$ emissions are decreased as the applied electrical voltage of the non-thermal plasma reactor is elevated at the same engine speed and load.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1043-1046
• /
• 1998

Aluminium based inorganic flocculants are extensively used in this country in the removal of fine particles present in the raw water for the production of drinking water. These inorganic flocculants, however, have potential hazard of high residual aluminium ions in the treated waters, which is known to be one of the reasons of alzheimer's disease. Inorganic flocculants alone are sometimes incapable of treating water when there are excessive turbidity in the raw water sources due to flooding. A polyamine type polymeric flocculant has long been used to treat raw water in the drinking water production in the European countries and United State of America. The optimum reaction conditions such as mole ratio of epichlorohydrin(EPI) to dimethylamine(DMA), reaction temperature and time for each stage for the pilot scale preparation of polyamine from EPI-DMA was studied in this work. The variation of intrinsic viscosity and flocculating efficiency in the water treatment of the synthesized polyamines were evaluated. The residual materials after polymerization reaction were analyzed by gas chromatography to study the effect of variation of reaction conditions.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.3
• /
• pp.1119-1123
• /
• 2014

Head and neck cancers (HNC) are extremely complex disease types and it is likely that chromosomal instability is involved in the genetic mechanisms of its genesis. However, there is little information regarding the background levels of chromosome instability in these patients. In this pilot study, we examined spontaneous chromosome instability in short-term lymphocyte cultures (72 hours) from 72 study subjects - 36 newly diagnosed HNC squamous cell carcinoma patients and 36 healthy ethnic controls. We estimated chromosome instability (CIN) using chromosomal aberration (CA) analysis and nuclear level anomalies using the Cytokinesis Block Micronucleus Cytome Assay (CBMN Cyt Assay). The proliferation rates in cultures of peripheral blood lymphocytes (PBL) were assessed by calculating the Cytokinesis Block Proliferation Index (CBPI). Our results showed a significantly higher mean level of spontaneous chromosome type aberrations (CSAs), chromatid type aberration (CTAs) dicentric chromosomes (DIC) and chromosome aneuploidy (CANE UP) in patients (CSAs, $0.0294{\pm}0.0038$; CTAs, $0.0925{\pm}0.0060$; DICs, $0.0213{\pm}0.0003$; and CANE UPs, $0.0308{\pm}0.0035$) compared to controls (CSAs, $0.0005{\pm}0.0003$; CTAs, $0.0058{\pm}0.0015$; DICs, $0.0005{\pm}0.0003$; and CANEUPs, $0.0052{\pm}0.0013$) where p<0.001l. Similarly, spontaneous nuclear anomalies showed significantly higher mean level of micronuclei (MNi), nucleoplasmic bridges (NPBs) and nuclear buds (NBUDs) among cases (MNi, $0.01867{\pm}0.00108$; NPBs, $0.0156{\pm}0.00234$; NBUDs, $0.00658{\pm}0.00068$) compared with controls (MNi, $0.00027{\pm}0.00009$; NPBs, $0.00002{\pm}0.00002$; NBUDs, $0.00011{\pm}0.00007$).The evaluation of CBPI supported genomic instability in the peripheral blood lymphocytes showing a significantly lower proliferation rate in HNC patients ($1.525{\pm}0.005552$) compared to healthy subjects ($1.686{\pm}0.009520$) (p<0.0001). In conclusion, our preliminary results showed that visible spontaneous genomic instability and low rate proliferation in the cultured peripheral lymphocytes of solid tumors could be biomarkers to predict malignancy in early stages.

• Korean Journal of Clinical Pharmacy
• /
• v.22 no.3
• /
• pp.239-250
• /
• 2012

In recent years, national health insurance(NHI) coverage had been expanded gradually for cancer as a severe disease requiring high level of medical expenditure, to reduce patient's financial burden. But, subjective burdens level for out-of-pocket(OOP) money expense are still considerable owing to high medical cost and decent numbers of services not covered by benefit plan. This study aimed to investigate OOP medical expenditures and identify factors influencing subjective financial burden in cancer patients. A 28-items questionnaire for self-reporting by responders was designed to satisfy study goal and finalized following by one pilot study and experts' verification process. Subjects were enrolled during July to October 2010 through regular meetings organized by five patient or patient-advocacy groups had acknowledged the study purpose. Subjects who aged 20 or more, have histories of cancer diagnosis and anticancer drug use, and voluntarily agreed to participate in this study were recruited. Total 107 subjects included in the analysis have cancer lesions in breast, colon, kidney, liver or stomach at the stages from I to IV. Approximately 73% of them has passed less than 5 years since cancer diagnosis. For the OOP medical expenditure regarding cancer, less 6 million won was in 31%, 6-15 million won in 35% and more than 15 million won in 28% of responders, and more than half responders(58%) felt financial burden subjectively. 63% of responders had subscribed commercial insurances, resulting in money receipts of more than 10 million won since cancer diagnoses in 76% of responders. Logistic regression results showed significant differences in subjective OOP financial burden level depending on gender, household income level, benefit type, commercial insurance money receipt degree, year cancer diagnosed, cancer lesion, therapy type, duration of anticancer drug use, drug listing in national formulary, total OOP medical expenditure and total OOP anticancer drug expense. They had mixed feelings both wishes to expand NHI coverage to reduce financial burden(70%) and no willingness to increase premium(59%). This result suggested that NHI might direct future strategies to reduce absolute total OOP medical cost and expand benefit plan coverage in higher burden groups in particular.