• 제목/요약/키워드: pile toe load test

검색결과 19건 처리시간 0.02초

대구경 현장타설말뚝의 설계를 위한 선단재하방법에 의한 시험말뚝 재하시험 (Preliminary Load Tests for the Design of Large Diameter Drilled Shaft by Bi-directional Loading Method at Toe)

  • 송명준;박영호;김동준
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.89-98
    • /
    • 2005
  • Preliminary pile load tests for the design of large diameter drilled shaft were performed on two of reduced scale(D=1370mm) test piles. The maximum loads of 2350 tonf in each direction were applied using bi-directional hydraulic jacks(Osterberg Cell) at toe. Neither of the test piles yielded in terms of skin friction and end bearing. Comparisons of the test results with several methods that estimate pile capacity show that the method of Horvath and Kenney(1979) for skin friction and Zhang and Einstein(1998) for end bearing were most appropriate for the site. The test results were directly applied to pile design in case RQD of skin and toe was larger than that of the test pile. It is desirable, therefore, to consider not only unconfined compression strength but also rock mass properties(i.e. TCR, RQD) for skin friction and end bearing evaluation in the future.

  • PDF

초고층에서의 현장타설말뚝 재하시험방법 고찰 (The Study of Load Test Method for In-Site Casting Pile In High Rise Building.)

  • 김대학;홍영길;한성무;구웅회;박찬덕
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
    • /
    • pp.385-392
    • /
    • 2008
  • Modern city have had a lot of high-rise building in high standards and multi-level performance. Using of city space reach better stages by using integration. These skyscraper have increased working load on ground. that building is efficiently designed for that soil capacity is well applied. With material side, big size pile, high strength concrete and high strength steel is used for that getting enough lobby space and resisting load increased of high-rise building. limit load test and load transmitted test can make soil capacity optimized. By the way, method of measuring pile capacity is more advanced and bigger. pile type applied by high rise building have underground excavation space, also reflect regional soil property and have some fact reviewed. A lot of high rise building recently is built as land mark in Seoul, Busan and Incheon. about method of measuring capacity of foundation pile, example of construction field is compared and reviewed.

  • PDF

강관 부착 PHC파일로 시공된 매입말뚝의 선단지지력 산정 (Calculation of Base Load Capacity of Bored Pre-cast Piles Using New PHC PIles with Steel Pipe at Pile Toe)

  • 백규호
    • 한국지반공학회논문집
    • /
    • 제32권9호
    • /
    • pp.5-16
    • /
    • 2016
  • 풍화암에 근입된 매입말뚝의 선단지지력을 증대시키기 위해 파일 선단에 짧은 길이의 강관을 부착한 새로운 PHC파일이 개발되었다. 본 연구에서는 새로운 PHC파일로 시공된 매입말뚝의 선단지지력 특성을 정량적으로 파악하기 위하여 지반조건이 다른 7개 현장에 새로 개발된 매입말뚝을 시공하고 정재하 및 동재하시험을 수행하였다. 그리고 정재하 시험에서 얻어진 결과에 근거해서 새로운 PHC파일로 시공된 매입말뚝의 선단지지력을 산정하기 위한 경험식을 제안하였다. 현장에서 측정된 선단지지력과 지지력 산정식으로부터 계산된 선단지지력을 비교한 결과 기존 지지력 산정식은 새로운 PHC파일로 시공된 매입말뚝의 선단지지력을 상당히 과소평가하는 반면 제안된 경험식은 새로운 PHC파일로 시공된 매입말뚝의 선단지지력을 안전측에서 산정하는 것으로 나타났다.

암반에 근입된 말뚝의 선단 거동 특성에 관한 연구 (Study on the Behavior of Toe of Drilled Shaft on the Rock Mass)

  • 박완서;전석원;한용희;최세근
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
    • /
    • pp.842-847
    • /
    • 2008
  • Despite of the increasing number of the application of the drilled shaft pile in construction site, most of the study of pile capacity has been centered side shear resistance. But it is common that the drilled shaft is socketed on the rock so as to use the bearing resistance, so prediction of the toe's movement and characteristic of the bearing capacity is important as the side shear resistance. Therefore the model tests were performed in order to study the characteristic of bearing capacity on rock mass. The material of the test blocks were the mortar which was mixed with sand, cement and water, and test block size was $240{\times}240{\times}240mm$. Load was pressed by the 45mm of diameter of miniaturized pile and plate jack and steal plate were used to the confined stress for representing the underground condition. The relation of load-displacement was measured in many different conditions of rock mass such as direction of discontinuities, spacing and strength, and q-w curves of the toe of the pile were verified in each condition.

  • PDF

선단 하부지반 그라우팅된 개단강관말뚝의 연직 지지력에 관한 연구 (Study on the Vertical Pile Capacity of Base-grouted Pile)

  • 정두환;최용규;정성교
    • 한국지반공학회논문집
    • /
    • 제15권2호
    • /
    • pp.165-180
    • /
    • 1999
  • 모형 압력 토조에 개단, 폐단, 관내토 그라우팅, 그리고 선단 하부지반 그라우팅 말뚝들을 설치하여 수행된 재하실험을 통해 그 지지력을 비교하였고, 유사화된(Simulated) 해진시 말뚝의 설치깊이를 변화시켜 선단 하부지반 그라우팅 말뚝의 안정성을 검토하였다. 또한, 재하실험과 해진 실험은 2개와 4개로 된 군말뚝에 대해서도 수행되었다. 관내토 선단부만 그라우팅한 말뚝의 지지력은 선단 지반 교란으로 인한 선단지지력 감소로 개단말뚝에 비해 극한지지력이 약 11.2~30.8%정도 작았다. 관내토 선단 하부지반 그라우팅한 말뚝의 지지력은 개단말뚝의 지지력보다 약 23.8~33.9%정도 증가하였으며, 이는 폐단말뚝의 지지력과 비슷하였다. 선단 하부지반 그라우팅된 군말뚝은 개단 군말뚝에 비해 증가하였는데, 2개의 군말뚝의 경우에는 14.6~31.8%만큼 지지력이 증가하였으며, 4개의 군말뚝의 경우는 15.3~22.4%만큼 증가하였다. 심해에서 발생된 해진시 관내토 선단 하부지반 그라우팅된 개단말뚝의 안정성은 말뚝의 설치 형태와 말뚝의 지중관입 길이에 따라 달라졌다. 외말뚝의 경우에는 지중 관입 깊이가 20m보다 깊어지면 안정한 상태를 유지할 수 있었으나, 12m보다 짧은 말뚝은 파괴될 수 있었고, 12m보다 긴 말뚝의 경우에는 가동(Mobility) 상태를 유지할 수 있었다. 군말뚝의 경우에는 지중 관입깊이가 7m이상이면 지지력의 일부만 감소하여 약간 변위하는 "Mobility" 상태를 유지할 수 있었다.유지할 수 있었다.

  • PDF

삼축압축시험을 통한 암반에 근입된 현장타설말뚝의 선단 하중전이곡선 산정 (Evaluation of the q-w Curve on Rock-Socketed Drilled Shafts by Triaxial Compression Tests)

  • 김태형;김용민;정상섬
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 추계 학술발표회
    • /
    • pp.455-465
    • /
    • 2008
  • In this study, the load distribution and deformation of rock-socketed drilled shafts subjected to axial load are investigated based on small scale model tests. In order to analyze the effects of major influencing factors of end bearing capacity, Hoek-cell triaxial tests were performed. From the test results, it was found that the initial slope of end bearing load transfer (q-w) curve was highly dependent on rock mass modulus and pile diameter, while the ultimate unit toe resistance ($q_{max}$) was influenced by rock mass modulus and the spacing of discontinuities. End bearing load transfer function of drilled shafts socketed in rock was proposed based on the Hoek-cell triaxial test results and the field loading tests which were performed on granite and gneiss in South Korea. Through the comparison with pile load tests, it is found that the load-transfer curve by the present study is in good agreement with the general trend observed by field loading tests, and thus represents a significant improvement in the prediction of load transfer of drilled shaft.

  • PDF

타격관입 개단말뚝의 동적진동에 의한 압축지지력 저감특성 (Characteristics on the Vertical Load Capacity Degradation for Impact driven Open-ended Piles During Simulated Earthquake /sinusoidal Shaking,)

  • 최용규
    • 한국지반공학회지:지반
    • /
    • 제12권6호
    • /
    • pp.51-64
    • /
    • 1996
  • 축하중계측장치가 부착된 모형 개단 강관 말뚝을 상대밀도 49%인 초세립질 포화 모래지반을 담고 있는 압력 토조속에 타입한 후 정적압축재하시험을 실시하여 극한지지력을 결정하였다. 극한지지력의 임의 수준의 압축하중을 말뚝머리에 재재하한 후 유사지진 진동 및 Sine정현파 진동을 작용시켜 동적 진동에 의한 개단말뚝의 압축지지력 저감특성을 연구하였다. 유사화된 지진진 동과 Sine정현파진동에 의한 개단말뚝의 지지력 저감특성은 큰 차이를 보였다. 유사화된 지진 진동중 지지력 저감율은 작용하중의 크기에 따라 크게 달라지는데, 작용하중의 크기가 약 70% 이하일 경우에는 지지력 감소율이 8%이하였으며, 극한하중의 90%이상을 지지하는 개단말뚝의 극한지 지력은 약 15%이상 감소되었다. 또한, 외주면 마찰력 성분의 감소량은 감소된 총 지지력의 약 80%를 차지하였다. Sine정현파 진동중 지지력의 감소율은 작용하중의 크기에 따라 달라지지 않으며, 진폭과 진동수에 의해 크게 영향을 받았다. 즉, 진폭이 클수록, 진동수가 적을수록 지지력은 크게 감소되었다. 관내토 폐색응력의 감소양상은 진동의 종류에 따라 크게 달랐다. 유사 지진 진동에 의한 관내토 폐색응력의 감소는 작용하중의 크기에 상관없이 말뚝 선단으로 부터 약 3.0D, 이내의 관내 토에서 발생되었다. Sine정현파 진동에 의한 판내토 폐색응력의 감소는 말뚝 선단으로 부터 약 1.0D,이내의 관내토에서 크게 감소하고, 1.0-3.0D,의 관내토 부분에서는 거의 감소되지 않았다. 또한, 관내토 폐색력은 크게 감소되어졌고, 작용하중의 크기에 따라 감소율도 크게 달랐다.

  • PDF

PHC 말뚝의 하중전이실험을 통한 참 지지력의 산정 (Determination of True Resistance from Load Transfer Test Performed on a PHC Pile)

  • 김성렬;정성교
    • 한국지반공학회논문집
    • /
    • 제22권11호
    • /
    • pp.113-122
    • /
    • 2006
  • 국내에서 말뚝 정재하 실험이 수많이 수행되고 있지만, 그 결과의 활용도가 낮아서 재하실험 방법과 분석방법 등에 대하여 재고할 필요성이 제기되고 있다. 본 연구에서는 두터운 연약지반 하부의 모래층에 PHC 말뚝 선단을 지지시킨 후 하중전이 정재하 실험을 수행하였다. 말뚝의 설치 이후에 장기간에 걸쳐 주면 마찰력을 측정하였으며, 국내에서 보편적으로 적용되고 있는 재하법과는 다른 급속재하법에 의하여 정재하실험을 실시하였다 그 실험결과를 이용하여 말뚝의 탄성계수, 잔류응력 및 참 지지력을 산정하였다. 결과적으로, 재하실험 전에 말뚝에 존재하는 잔류하중이 주면 마찰력과 선단지지력에 크게 영향을 미친다는 사실을 확인할 수 있었다. 또한, 점성토 지반에서의 장대말뚝에 대해서는 지반의 강도회복(setup) 효과가 매우 크다는 사실을 알 수 있었다.

선단유압재하시험을 이용한 단층파쇄대에 설치된 대구경 현장타설말뚝의 선단지지력 측정 사례 (Case Studiy on Measurement of End Bearing Capacity for Large Diameter Drilled Shaft Constructed in Fault Zone using Loading Test)

  • 정창규;김태훈;정성민;황근배;최용규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.74-81
    • /
    • 2004
  • In this study, static end loading tests with load transfer measurement were accomplished for large diameter drilled shaft constructed in fault zone. Yield pile capacity (or ultimate pile capacity) from load-settlement curve was determined and axial load transfer behavior was measurd. The end bearing capacity was increased 2 times due to grouting the toe ground under pile base.

  • PDF

양방향 말뚝선단재하시험에 의한 암반근입 현장타설말뚝의 하중-침하거동 분석 (Load-Settlement Behavior of Rock-socketed Drilled Shafts by Bi-directional Pile Load Test)

  • 설훈일;정상섬;한근택;김재영
    • 한국지반공학회논문집
    • /
    • 제24권11호
    • /
    • pp.61-70
    • /
    • 2008
  • 본 연구에서는 국내 4개 지역에서 시공된 총 10본의 대구경 암반 근입 현장타설말뚝의 양방향 말뚝 선단재하시험과 일반적인 말뚝두부 재하시험을 토대로 하중 재하방식에 따른 말뚝의 침하거동 및 하중전이 거동 특성을 분석하였다. 이로부터 양방향 재하하중을 받는 현장타설말뚝의 등가 말뚝 두부하중침하 거동을 고찰하곤 기존 등가 두부하중침하 곡선 산정방법과의 비교분석을 통하여 주면하중에 의해 추가적인 선단침하량의 영향정도를 분석하였다. 본 연구결과, 주면하중에 의해 발생되는 선단침하량을 고려한 하중전이해석(coupled load transfer analysis)을 통한 하중-침하량 예측값은 정재하 시험결과를 적절히 예측하는 것으로 나타났으나, 근사적 해석법을 통한 등가 하중-침하 곡선 및 일반적인 하중전이해식(uncoupled load transfer analysis)의 예측값은 정재하 시험결과에 비해 침하량을 과소 평가할 수 있음을 알 수 있었다. 하지만, 시험말뚝 근입부분의 암반층이 매우 단단할 경우 주면하중에 의한 선단침하량이 매우 작은 것으로 나타났다.