• E2M - 전기 전자와 첨단 소재
• /
• 제2권1호
• /
• pp.14-24
• /
• 1989

본 연구에서는 1-3형 PZT/Epoxy 압전복합재료를 제조하고 이에 대한 D-E 곡선, 펄스응답특성 및 유중발생전압특성 등을 조사하였다. 압전복합재료의 음향임피던스는 PZT체적비가 증가함에 따라 비례적으로 증가하였다. 그리고 펄스응답특성은 단일상 PZT의 특성에 비하여 아주 양호하게 나타났으며 PZT 체적비가 40% 이상에서는 펄스응답특성이 거의 일정하게 되었다. 유중에서의 발생전압은 PZT체적비, 시편두께 그리고 유중압력이 증가함에 따란 비례적으로 증가하였다. 이들의 결과는 초음파 트랜스듀서 제작에 좋은 자료가 될 것으로 생각한다.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2209-2217
• /
• 2006

Dynamic flow characteristics of a counter-flow vortex tube is investigated using hot-wire and piezoelectric transducer (PZT) measurements. The experimental study is conducted over a range of cold air outlet ratios (Y=0.3, 0.5, 0.7, and 1.0) and inlet pressure 0.15 MPa. Temperatures are measured at the cold air outlet and along the vortex tube wall. Hot-wire is located at cold outlet and PZT is installed at inner vortex tube by mounting at throttle valve. The cold outlet temperature results show that the swirl flow of vortex tube is not axisymmetric. The hot-wire and PZT results show that there exist two distinct kinds of frequency, low frequency periodic fluctuations and high frequency periodic fluctuations. It is found that the low frequency fluctuation is consistent with the Helmholtz frequency and the high frequency fluctuation is strongly related with precession oscillation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.524-529
• /
• 2004

Recently High precision positioning device is used in many kinds of manufacturing and scientific instruments. Piezoelectric transducer is applied to the positioning devive as actuator, PZT has a high resolution, however, moving range is short. Many researcher have developed the mechanism for increasing a motion range. The types of increasing motion range mechanism with PZT are inertial slider, friction driver, ultrasonic motor, etc. In this paper we discuss the review of the hish precision actuator mechanism with PZT. Many kinds of mechanism for high precision are shown and compared.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 1호
• /
• pp.455-458
• /
• 1998

초음파 산업분야에 널리 사용되고 있는 PZT 압전 세라믹 진동자의 경우 높은 품질계수로 인하여 대역폭이 좁고, 진동 시 두께방향 진동뿐만 아니라 횡방향 진동으로 인하여 초음파 신호를 분석하는데 여러 가지 어려움이 항상 존재하였다. 따라서 본 연구에서는 PZT 세라믹스와 고분자 재료인 Epoxy를 사용하여 1-3 접속도를 갖는 압전 복합재료를 제조하였다. 이를 이용하여 초음파 트랜스듀서를 제작하였고, 이에 대한 전기음향변환능률을 어드미턴스 loop를 측정하여 구하였다. 유전율, 공진 주파수 등을 포함한 기본적인 트랜스듀서의 파라메터들은 공진 부근에서 전기적인 임피던스로부터 측정하였다. 이러한 파라메터들을 적용하여 주파수에 대한 트랜스듀서의 성능을 평가하였다. Pulse-echo법을 이용하여 삽입손실율을 구하고 임펄스 반응을 통하여 주파수 대역폭에 대해서 측정하였다. 그 결과 어드미턴스 loop로부터 두께방향모드를 제외한 횡방향 모드는 거의 나타나지 않았다. 유전율은 5.25㎊m이었고, 공진주파수 1.65MHz에서 -8dB의 최소 손실이 발생하였다. 주파수대역폭은 -6dB에서 64%(Q ; 1.56)의 대역폭이 측정되었고 전기기계 결합계수는 0.54이고 전기기계변환능률은 52%, 기계음향변환능률은 31%로 측정되었다.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.48-57
• /
• 2003

A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at spark plug and the combustion characteristics of homogeneous charge methane-air mixture under various initial pressure, excess air ratio and ignition times in quiescent mixture. The flow characteristics such as mean velocity and turbulence intensity was analyzed by hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer and flame propagation acquired by ICCD camera were used to investigate the effect of initial pressure, excess air ratio and ignition times on pressure, combustion duration, flame speed and burning velocity. Mean velocity and turbulence intensity had the maximum value at 200 or 300ms and then decreased to near 0 value gradually after 3 seconds. Combustion duration, flame speed and burning velocity were observed to be promoted with excess air ratio of 1.1, lower initial pressure and ignition time of 300ms.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1203-1206
• /
• 2004

마이크로 컬럼은 차세대 리소그라피 기술의 하나로 마이크로 컬럼의 기능이 기존의 전자빔 컬럼을 능가하여 주목을 받는다. 초소형 전자빔 컬럼은 기존의 전자빔 컬럼과 비교하여 수차, 렌즈의 크기 및 원형에 성능이 보다 민감하게 반응하므로 정확한 정렬과 가공 기술은 초소형 전자빔 마이크로 컬럼의 성능에 매우 중요하다. 그러나, 기준치 piezoelectric transducer (PZT)나 scanning tunneling microscopy (STM)을 이용한 정렬 기술은 매우 복잡하고 어려운 단점이 있다. 본 연구에시는 레이저 회절 패턴방식과 레이저 정밀 가공으로 실리콘 렌즈와 파이렉스 spacer를 정확하게 교대로 조립하였으며, 이 방법으로 완성된 마이크로 컬럼의 STEM동작을 조사하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.347-351
• /
• 1997

A micromachined piezoelectic cantilever transducer,which works both as a microphone and as a microspeaker,has been fabricated and tested. The 2000*2000*3.mu.m .sap2. cantilever has oxide(ZnO)piezoelectric thin film on a supporting layer of low-pressure chemical-vapor-deposited(LPCVD)low-stress siliconnitride. A highlight of the fabrication process which may also be relevant for other micromachined stuctures is the technique for producing a flat,multilayer cantilever. The measured microphone sensitivity is fairly constant at 2 mV/.mu.bar in the low frequency range and rise to 20 mV/.mu.bar at the lowest resonant frequency of 890 Hz. The 2 mV/.mu.bar sensitivity is the highest report to data for a microphone with a micromachined diaphragm. When measured into a 2 cm/sap3 coupler with 4V (zero-park)drive,the microspeaker output sound pressure level(SPL) is 75 dB at 890 Hz. It increases to approximately 100dB SPL at 4.8kHz with 6V(zero-park)drive. The measured microphone frequency response agrees well with the results of an ABAQUS simulation.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1317-1326
• /
• 2003

The maximum temperature limit at which liquid boils explosively is called the superheat limit of liquids. The superheat limits of hydrocarbon liquids and their mixtures were measured by the droplet explosion technique. Also the fully evaporated droplet at the superheat limit and subsequent bubble evolution from the fully evaporated droplet were visualized. The pressure wave emanating from the evaporating droplet and subsequent bubble evolution process were measured by a piezoelectric transducer.

• Transactions on Electrical and Electronic Materials
• /
• 제5권2호
• /
• pp.61-65
• /
• 2004

Bolt-tightened Langevin type vibrators using longitudinal mode of bar were designed and fabricated. In order to amplify the displacement of the tip of the vibrators, stacked ceramics were used and five different shapes of the horns were designed and jointed. Resonant frequencies and vibration characteristics of vibrators and horns were analyzed by ANSYS(finite element analysis computer program), and the displacements of tips of the horns were measured. As results, when the numbers of the stacked ceramics were increased, the displacements of the tips were increased and the driving voltages were decreased. Step l horn (BLT-St1) showed maximum displacement of 36.92 $\mu\textrm{m}$ at 36.7 ㎑ with 45 V$\sub$rms/ and 0.11 A. The displacement amplification ratio was about 5.2. But, the stress of step l horn was concentrated on intersection, where two diameters meet. To lessen the stress, step3 shaped hem is recommended.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1427-1429
• /
• 1997

In this study, piezoelectric transducer were designed and manufactured using PZT-5A which have relatively high electromechanical coefficient. A epoxy is a good material as matching and backing layers. The envelope was reduced 60% as using matching layer and 76% as using matching and backing layer. NDT was successfully carried out for aluminum test pieces. Distance error and resolution of PZT-5A probe were improved as increasing frequency. Envelope was effectively reduced by backing layer but sensitiveness was poor.