• 제목/요약/키워드: physicochemical characterization

검색결과 238건 처리시간 0.023초

Characterization of Biogenic Amine-Producing Microorganisms Isolated from Myeolchi-Jeot, Korean Salted and Fermented Anchovy

  • Mah, Jae-Hyung;Ahn, Jun-Bae;Park, Jong-Hyun;Sung, Ha-Chin;Hwang, Han-Joon
    • Journal of Microbiology and Biotechnology
    • /
    • 제13권5호
    • /
    • pp.692-699
    • /
    • 2003
  • The changes of physicochemical and microbiological states of Myeolchi-jeot, a Korean salted and fermented anchovy, were investigated during 20 days of storage at $4^{\circ}C,\;15^{\circ}C,\;and\;30^{\circ}C$. A total of 314 bacterial strains isolated from Myeolchi-jeot samples at different time intervals were identified, and their abilities to produce biogenic amines were determined by both decarboxylating agar media and HPLC analysis. The salinity and water activity of Myeolchi-jeot changed little, while the pH increased slightly over 20 days at the tested temperatures. A significant increase of total plate count was observed in the sample stored at $30^{\circ}C$. Staphylococcus spp. were dominant in Myeolchi-jeot, and its amine productivity was very weak. Bacillus spp. appeared increasingly with the progress of storage at all temperatures tested, and the increase was considerably dependent on the increase of storage temperature. Also, 58-73%, 83-90%, 81-90%, and 83-93% of Bacillus strains had the ability to produce histamine, tyramine, putrescine, and cadaverine, respectively. Therefore, the main amine producer in Myeolchi-jeot stored for a long period seems to be the genus Bacillus, especially B. licheniformis.

Facile Modification of Surface of Silica Particles with Organosilanepolyol and Their Characterization

  • Lee, Joongseok;Han, Joon Soo;Yoo, Bok Ryul
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권12호
    • /
    • pp.3805-3810
    • /
    • 2013
  • The surface modification of silica particles (SPs) was systemically conducted by the treatment of 0.1-10 wt % phenylsilanetriol (PST) on the basis of SPs used through two step processes: 1) the PST coating of SPs via evaporation under reduced pressure and 2) their thermal condensation leading to Si-O-Si bond formation via heating at $130^{\circ}C$. The evaluation of the modified SPs was conducted by the simple floating test on water and the measurement of the contact angle (CA) of water droplet on the 2-dimensional layer of modified SPs on slide glass. When PST was used about 2 wt % or above on the basis of SPs (about average size: 50 nm) used, the modified SPs were fully floated on the water and all dispersed into upper organic solvent layer after a shaking with the mixture of the water and benzene, indicating that the modified SPs have hydrophobic properties. The modified SPs were characterized by $^{29}Si$ MAS NMR and physicochemical properties including SEM, TEM, BET, adsorption/desorption isotherms, etc. were measured and compared each other in details. This research demonstrates that the organosilanetriol is a good modifier applicable for the surface modification of inorganic oxide particles using a low amount of modifier on the basis of oxide particles used.

비수계분산매체에서 질화규소와 소결첨가제 AlN 및 Nd$_2$O$_3$의 분산 (Dispersion of Silicon Nitride Particles and Sintering Additives of AlN and Nd$_2$O$_3$ in Nonaqueous Suspending Media)

  • 김재원;백운규;윤경진
    • 한국세라믹학회지
    • /
    • 제36권2호
    • /
    • pp.210-219
    • /
    • 1999
  • Alcohols, hydrocarbons, ketones 그리고 ethers와 같은 다양한 유기용매에서 질화규소 및 소결첨가제로 사용되는 AlN, Nd2O3 입자의 분산특성을 연구하였다. 분산안정화기구 및 유기공정첨가제와의 상호작용에 관한 연구를 수행하여 비수계 시스템에서 세라믹 입자의 분산성을 규명하였다. 현탁액의 물성특성은 산술된 Hamaker 상수 뿐 아니라 electrokinetic sonic amplitude 측정 및 유동학적 결과로부터 얻어진 흐름곡선을 이용하여 평가하였다. 유기용매 내에서 Si3N4, AlN 그리고 Nd2O3 분산안정화에 기여하는 정전기적 척력은 예상보다 컸으며, 이것은 유기용매의 물리화학적 특성에 의존함을 알 수 있었다.

  • PDF

Preparation and Characterization of Poly(amide imide)-based Carbon Nanofibers/Epoxy Nanocomposites

  • Seo, Min-Kang;Choi, Kyeong-Eun;Park, Sang-Hee;Hong, Young-Taik;Park, Soo-Jin
    • Carbon letters
    • /
    • 제10권4호
    • /
    • pp.329-334
    • /
    • 2009
  • In this work, the effect of carbon nanofibers (CNFs) addition on physicochemical characteristics of CNFs-reinforced epoxy matrix nanocomposites was studied. Poly(amide imide) solutions in dimethylformamide were electrospun into webs consisting of $250{\pm}50$ nm fibers which were used to produce CNFs through stabilization and carbonization processes. As a result, the CNFs with average diameter of $200{\pm}20$ nm were obtained after carbonization process. The nanocomposites with CNFs showed an improvement of thermal stability parameters and fracture toughness factors, compared to those of the specimen without CNFs, which could be probably attributed to the higher specific surface area and larger aspect ratio of CNFs, resulting in improving the mechanical interlocking in the nanocomposites. Also, the applied external loading can effectively transfer to CNFs because strong interactions are resulted between the epoxy matrix and the CNFs.

Wastewater treatment using a hybrid process coupling adsorption on marl and microfiltration

  • Maimoun, Bakhta;Djafer, Abderrahmane;Djafer, Lahcene;Marin-Ayral, Rose-Marie;Ayral, Andre
    • Membrane and Water Treatment
    • /
    • 제11권4호
    • /
    • pp.275-282
    • /
    • 2020
  • Hranfa's marl, a local natural mineral, is selected for the decontamination by adsorption of aqueous effluents in textile industry. Its physicochemical characterization is first performed. It is composed mainly of Calcite, Quartz, Ankerite and Muscovite. Its specific surface area is 40 ㎡ g-1. Its adsorption performance is then tested in batch conditions using an industrial organic dye, Bemacid Red E-TL, as a model pollutant. The measured adsorption capacity of Hranfa's marl is 16 mg g-1 which is comparable to that of other types of natural adsorbents. A hybrid process is tested coupling adsorption of the dye on marl in suspension and microfiltration. An adsorption reactor is inserted into the circulation loop of a microfiltration pilot using ceramic membranes. This makes possible a continuous extraction of the treated water provided that a periodic replacement of the saturated adsorbent is done. The breakthrough curve obtained by analyzing the dye concentration in the permeate is close to the ideal one considering that no dye will cross the membrane as long as the adsorbent load is not saturated. These first experimental data provide proof of concept for such a hybrid process.

Preparation of Solid Dispersion of Everolimus in Gelucire 50/13 using Melt Granulation Technique for Enhanced Drug Release

  • Jang, Sun Woo;Choi, Young Wook;Kang, Myung Joo
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권7호
    • /
    • pp.1939-1943
    • /
    • 2014
  • Solid dispersion (SD) system of everolimus (EVR) with Gelucire 50/13 (Stearoyl polyoxyl-32 glycerides) was prepared using melt granulation technique with the aim of improving the physicochemical properties and dissolution rate. The solid state characterization using scanning electron microscopy and X-ray powder diffraction, indicated that the drug was homogeneously distributed in the surfactant carrier in a stable amorphous form. The dissolution rate of EVR from the optimized SD composed of the drug, Gelucire 50/13 and microcrystalline cellulose in a weight ratio of 1:5:10, was markedly rapid and higher than that from the drug powder and the market product (Afinitor$^{(R)}$, Novartis Pharmaceuticals) in all dissolution mediums tested from pH 3.0 to pH 6.8. The results of this study suggest that formulation of SD with Gelucire 50/13 using melt granulation procedure may be a simple and promising approach for improving the dissolution rate and oral absorption of the anti-cancer agent without the need for using an organic solvent.

저온 플라즈마 처리한 폴리에스테르 직물의 키토산 처리에 따른 물리화학적 특성변화 -KES평가를 중심으로- (Physicochemical Characterization of PET Fabrics Treated with Chitosan after Exposure to $O_2$ Low Temperature Plasma - Especially by KES evaluation -)

  • 구강;김삼수;박영미;유재영;구본식;유승춘
    • 한국염색가공학회지
    • /
    • 제17권5호
    • /
    • pp.26-36
    • /
    • 2005
  • This study was carried to evaluate mechanical characteristics of Poly(ethylene terephthalate) fabrics (by Kawabata evaluation system(KES)) which was systematically treated with $O_2$ low temperature plasma and chitosan acetate solution. Furthermore, surface structure was investigated by SEM, AFM, air permeability and wettability. Tensile energy(WT), shear rigidity(G) and surface roughness(MIU) properties calculated by KES-FB have increased with increasing plasma treatment time, while bending rigidity(G) and energy of compression(WC) value were decreased compared with those of the untreated. SEM photographs showed the identification of chitosan coating but did not confirm the plasma etching structure. Air permeability was decreased according to plasma treatment time with increasing concentrations of chitosan. The water absorption rate made rapid progress by chitosan treatment.

Isolation and characterization of fowl adenovirus serotype 4 from chickens with hydropericardium syndrome in Korea

  • Park, Hong-Su;Lim, Il-Soo;Kim, Sang-Kyu;Kim, Toh-Kyung;Yeo, Sang-Geon
    • 대한수의학회지
    • /
    • 제51권3호
    • /
    • pp.209-216
    • /
    • 2011
  • Four strains of fowl adenovirus (FAdV) were isolated from 4 flocks of broiler or layer chickens affected by hydropericardium syndrome in Korea. These FAdVs were classified as serotype 4 by restriction fragment length polymorphism patterns of hexon genes and whole genomes. The virus exhibited cytopathic effects consisting of rounding, ballooning and clustering in primary chicken embryo liver cell cultures. In transmission electron microscopy, virus particles in hexagonal shape aggregated exclusively in the nuclei of hepatocytes of the chickens as the typical appearances in adenovirus infections. Buoyant density of the virus in cesium chloride (CsCl) was 1.34 g/mL. The virus was stable to chloroform, ether, 50~70% ethanol, acidic condition at pH 3, 0.25% trypsin (1 : 250), heat at $50^{\circ}C$ for 30 min, but labile to 100% ethanol, heat at $52{\sim}60^{\circ}C$ for 30 min, 1 M $MgCl_2$ at $50^{\circ}C$ for 1 h, 1 : 2,000 formalin (37%). All of the physicochemical properties pertained to the characteristics of adenoviruses. Eight viral polypeptides were determined in CsCl-purified virus by sodium dodecyl sulfate-polyacrylamide gel electrophoresis.

Pillar Host Material로써 Layered(Mg/Al) Double Hydroxide의 물리화학적 특성화 (Physico-Chemical Characterization of the Layered Double Hydroxide as Pillar Host Material)

  • 형경우;이용석
    • 한국세라믹학회지
    • /
    • 제35권5호
    • /
    • pp.443-450
    • /
    • 1998
  • Layered double hydroxides(LDHs) [{{{{ {Mg }_{1-x } }}{{{{ {Al }_{x } }}({{{{ {OH}_{2 } }})]ζ+({{{{ {CO }`_{3 } ^{2- } ){ }_{x/2 } }}$.${{{{ { yH}_{2 }O }} wioth variation of layer charge densitywere synthesized by co-precipitation methdo since their charge densities have a very important role to be det-ermined the physicochemical properties of layered materials. The XRD IR and thermal studies of them were discussed and the kinetic study for the decarbonation reaction was also carried out. From the results of XRD analysis we found that the lattice parameter and the unit cell volume were linearly decreased with the amount of Al substituents(x) in the vicinity of x=2∼10${\times}$1/3${\times}$10-1 but they had nearly constant values when the x are far from these vicinit. The activation energies for the decarbonation reaction of x=6.8, 10${\times}$1/3${\times}${{{{ { 10}^{-1 } }} were estimated to be 47.0, 37.6, 39.3 kcal/mol The specific surface areas(90-120 m2/g) of stable hy-drotalcite-type LDHs were dractically decreased with increasing of layer charge density.

  • PDF

분질 및 점질 고구마 전분의 아밀로펙틴 특성 (Characterization of amylopectins isolated from dry and moist type sweet potato starch)

  • 김성란;안승요
    • Applied Biological Chemistry
    • /
    • 제34권1호
    • /
    • pp.26-31
    • /
    • 1991
  • 한국산 고구마 중 분질인 수원 147과 점질인 황미로부터 전분을 분리하고 이화학적 특성을 비교하였으며 아밀로펙틴의 분자구조적 성질을 조사하였다. 수원 147 전분은 황미전분에 비하여 팽윤력이 낮고 호화개시온도가 높았다. ${\beta}-Amyloysis\;limit(%)$는 수원 147 아밀로펙틴이 57.6%, 황미 아밀로펙틴이 57.0%를 나타내었고, 평균사슬길이는 수원 147 아밀로펙틴이 24.8 포도당단위, 황미 아밀로펙틴이 21.9 포도당단위였다. 아밀로펙틴을 pullulanase로 가지절단처리한 후 Sephadex G-50으로 분획한 결과는 중합도($\overline{DP}\;35{\sim}45$)와 $\overline{DP}\;10{\sim}20$의 bimodal 분포를 나타내었으며 두 아밀로펙틴간 peak의 중합도에서 차이가 있었다.

  • PDF